Posts by kegnkiwi

Hi guys,

I am connected to a server and in cccam I am getting glitch free viewing but I am looking to move to a vu solo 4k and wanted to get my head around oscam first. I have used the cccam to oscam server convertor and popped the server details into user.server. All channels clearing but getting constant glitcing on nds channels. I'm testing on tm-nano-se using oscam open atv 11098 with emu and without. Image is the latest openatv 5.1. Is there an oscam server settings I can change to make thing a little smoother.

thanks

dioblo

Mach1 has given you instructions on how to find the port, you need to look in etc/tuxbox/config/oscam.conf using dcc (you said you already know how to send files across to your box) if you edit of view the oscam.conf it will show you what port to view shown above as:

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam

Then once you have this port number do like to use to do in cccam, open your computers browser and type in the box's ip then :(port numb) example 192.168.1.128:8888

I copied and pasted the information from the convertor to bottom of the exisiting text. In my file the information already there was just different configs for the reader i pasted it onto the end and saved it which would just overwrite the orginal file. At the end of the day its just a text file and you could delete it and redownload it if you needed. The file structure may be different on blackhole images or it may be the same I'm not sure exactly but it should be there somewhere.

Hi mate,

I've just been playing around tonight doing the same thing getting ready to buy the solo 4k, the files you need may well already be on the receiver from when you downloaded oscam. On my tm-nano-se using open pli the files could be found in usr/keys then in oscam folder. I copied the files from my convertor into oscam.server at the end of the stuff already in there and saved and exited and it started working fine.

I've got a 47" sony bravia 3d smart tv, its about 4 years old and cost a lot of money before the prices dropped. I have shipped it from one side to the world to the other and back and its never had one issue. It even rewrote its own software for the region it was in and back again.

Got a fire stick last week and side loaded kodi, had some issues getting it to pass through my bt router but once sorted it's very fast. Its slightly less spec that your box but still very fast.

This problem has existed for a while and now also effects primewire, movies25 and losmovies (maybe others). I thought it was a problem with tsmedia but I have just read the above about it being a server issue. I have gone back from 9.3 to 9.2 to resolve my issues.

Without going into too much detail when you updated you software you may have lost a bit of information that allows your box to connect to a server, suggest you contact your suppliers and ask for the server details.

If your card has gone through the new pairing process then you will have no luck getting the hd channels to work in your box. There are many threads out there on this.

I could offer you a full scan of optus 160e but they are for nz channels, I could at a push re align my dish this weekend and give you a basic search of 156e but as my dish is that small I can only get the nz beam of that bird. Your right though its a little more difficult down here. I'm in NZ

Ok heres what oscam read.

2012/10/02 20:30:49 2AAC6C30 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (mips-tuxbox-linux)
2012/10/02 20:30:49 2AAC6C30 s version=1.10rc-svn, build #6089, system=mips-tuxbox-linux, nice=-1
2012/10/02 20:30:49 2AAC6C30 s client max. idle=120 sec, debug level=0
2012/10/02 20:30:49 2AAC6C30 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/10/02 20:30:49 2AAC6C30 s client timeout=5000 ms, fallback timeout=1500 ms, cache delay=0 ms
2012/10/02 20:30:49 2AAC6C30 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2012/10/02 20:30:49 2AAC6C30 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/10/02 20:30:49 2AAC6C30 s signal handling initialized (type=sysv)
2012/10/02 20:30:49 2AAC6C30 s 775 service-id's loaded in 24ms
2012/10/02 20:30:49 2AAC6C30 s 37 tier-id's loaded
2012/10/02 20:30:49 2AAC6C30 s 1000 provid's loaded
2012/10/02 20:30:49 2AAC6C30 s 1 lengths for caid guessing loaded
2012/10/02 20:30:49 2AAC6C30 s monitor: disabled
2012/10/02 20:30:49 2AAC6C30 s camd33: disabled
2012/10/02 20:30:49 2AAC6C30 s camd35: disabled
2012/10/02 20:30:49 2AAC6C30 s cs378x: disabled
2012/10/02 20:30:49 2AAC6C30 s newcamd: initialized (fd=6, port=15000, crypted)
2012/10/02 20:30:49 2AAC6C30 s CAID: 096A
2012/10/02 20:30:49 2AAC6C30 s provid #0: 000000
2012/10/02 20:30:49 2AAC6C30 s radegast: disabled
2012/10/02 20:30:49 2AAC6C30 s http thread started
2012/10/02 20:30:49 2AAC6C30 s creating thread for device /dev/sci0
2012/10/02 20:30:49 2AAC6C30 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/02 20:30:49 2AAC6C30 s waiting for local card init
2012/10/02 20:30:49 2BE154B0 h HTTP Server listening on port 8888
2012/10/02 20:30:49 2C6154B0 r reader thread started (thread=2C6154B0, label=***, device=/dev/sci0, detect=cd, mhz=368, cardmhz=500)
2012/10/02 20:30:49 2C6154B0 r *** card detected
2012/10/02 20:30:50 2C6154B0 r ATR: 3F 78 13 25 04 40 B0 09 4A 50 01 4E 5A
2012/10/02 20:30:54 2C6154B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/10/02 20:30:55 2C6154B0 r card system not supported
2012/10/02 20:30:55 2C6154B0 r Normal mode failed, reverting to Deprecated Mode
2012/10/02 20:30:57 2C6154B0 r ATR: 3F 78 13 25 04 40 B0 09 4A 50 01 4E 5A
2012/10/02 20:30:58 2C6154B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/10/02 20:30:59 2C6154B0 r card system not supported
2012/10/02 20:30:59 2C6154B0 r card initializing error
2012/10/02 20:30:59 2AAC6C30 s init for all local cards done
2012/10/02 20:30:59 2AAC6C30 s anti cascading disabled

Then with cccam running.

2012/10/02 20:42:17 2AAC6C30 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (mips-tuxbox-linux)
2012/10/02 20:42:17 2AAC6C30 s version=1.10rc-svn, build #6089, system=mips-tuxbox-linux, nice=-1
2012/10/02 20:42:17 2AAC6C30 s client max. idle=120 sec, debug level=0
2012/10/02 20:42:17 2AAC6C30 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/10/02 20:42:17 2AAC6C30 s client timeout=5000 ms, fallback timeout=1500 ms, cache delay=0 ms
2012/10/02 20:42:17 2AAC6C30 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2012/10/02 20:42:17 2AAC6C30 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/10/02 20:42:17 2AAC6C30 s signal handling initialized (type=sysv)
2012/10/02 20:42:17 2AAC6C30 s 775 service-id's loaded in 22ms
2012/10/02 20:42:17 2AAC6C30 s 37 tier-id's loaded
2012/10/02 20:42:17 2AAC6C30 s 1000 provid's loaded
2012/10/02 20:42:17 2AAC6C30 s 1 lengths for caid guessing loaded
2012/10/02 20:42:17 2AAC6C30 s monitor: disabled
2012/10/02 20:42:17 2AAC6C30 s camd33: disabled
2012/10/02 20:42:17 2AAC6C30 s camd35: disabled
2012/10/02 20:42:17 2AAC6C30 s cs378x: disabled
2012/10/02 20:42:17 2AAC6C30 s newcamd: initialized (fd=6, port=15000, crypted)
2012/10/02 20:42:17 2AAC6C30 s CAID: 096A
2012/10/02 20:42:17 2AAC6C30 s provid #0: 000000
2012/10/02 20:42:17 2AAC6C30 s radegast: disabled
2012/10/02 20:42:17 2AAC6C30 s http thread started
2012/10/02 20:42:17 2AAC6C30 s creating thread for device /dev/sci0
2012/10/02 20:42:17 2AAC6C30 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/02 20:42:17 2AAC6C30 s waiting for local card init
2012/10/02 20:42:17 2BE154B0 h HTTP Server listening on port 8888
2012/10/02 20:42:17 2C6154B0 r reader thread started (thread=2C6154B0, label=***, device=/dev/sci0, detect=cd, mhz=368, cardmhz=500)
2012/10/02 20:42:18 2C6154B0 r *** card detected
2012/10/02 20:42:19 2C6154B0 r ATR: 3F 78 13 25 04 40 B0 09 4A 50 01 4E 5A
2012/10/02 20:42:23 2C6154B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/10/02 20:42:24 2C6154B0 r card system not supported
2012/10/02 20:42:24 2C6154B0 r Normal mode failed, reverting to Deprecated Mode
2012/10/02 20:42:25 2C6154B0 r ATR: 3F 78 13 25 04 40 B0 09 4A 50 01 4E 5A
2012/10/02 20:42:26 2C6154B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/10/02 20:42:27 2C6154B0 r card system not supported
2012/10/02 20:42:27 2C6154B0 r card initializing error
2012/10/02 20:42:28 2AAC6C30 s init for all local cards done
2012/10/02 20:42:28 2AAC6C30 s anti cascading disabled
2012/10/02 20:43:49 2E6454B0 c client connected to 15000 port
2012/10/02 20:43:49 2E6454B0 c encrypted newcamd:15000-client 127.0.0.1 granted (dummy, au=auto (1 reader))
2012/10/02 20:43:49 2E6454B0 c user dummy authenticated successfully (CCcam)
2012/10/02 20:43:49 2E6454B0 c AU disabled for user dummy
2012/10/02 20:43:52 2E6454B0 c dummy (096A&000000/03EC/65:79F4): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/10/02 20:44:00 2E6454B0 c dummy (096A&000000/03EC/65:52E6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/10/02 20:44:10 2E6454B0 c dummy (096A&000000/03EC/65:D56F): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/10/02 20:44:20 2E6454B0 c dummy (096A&000000/03EC/65:CFB9): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/10/02 20:44:30 2E6454B0 c dummy (096A&000000/03EC/65:C2F1): rejected group (0 ms) (of 0 avail 0) (no matching reader)

this is from the webif.

e Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 2AAC6C30 s 0 root 127.0.0.1 0 server 02.10.12 20:42:17 00:03:47 0000:0000 00:00:01 OK
Hide 2BE154B0 h 1 root 127.0.0.1 0 http 02.10.12 20:42:17 00:03:47 0000:0000 00:00:20 OK
Readers 0/1
Hide 2C6154B0 r 1 *** ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:03:47 ERROR (no entitlements)
Clients 1/1 (1 with ECM within last 15 seconds)
Hide Kill c 1 dummy ON ON 127.0.0.1 2982 newcamd (CCcam) 02.10.12 20:43:49 00:02:15 096A:03EC 00:00:04 OK

Hi guys

Does any one know if its possible to get the gold *** nz cards to work in oscam, I know people have the 45 blue cards working but unfortunatly I have been issued a 01 gold card. I have oscam installed and it reconises the card and this is passed to ccccam and cccam taking ecms but its not clearing the channel. I have herd that some people getting the channels to clearing in a pc based server but with glitches. Heres the configs ect I'm using.

Oscam user

[account]
user = dummy
pwd = dummy
group = 1
monlevel = 4
au = 1

oscam config.

[global]
logfile = /dev/null
disablelog = 1
disableuserfile = 1
fallbacktimeout = 1500
bindwait = 30
nice = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 30
lb_mode = 3
lb_save = 300

[newcamd]
port = 15000@096A:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
httpport = 8888
httpuser = admin
httpppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Oscam server

[reader]
label = ***
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 096A
detect = cd
mhz = 368
cardmhz = 368
ident = 096A:000000
group = 1
emmcache = 1,1,2
blockemm-g = 1
lb_weight = 100

Thanks for any help in advance

Sorry guys for jumping on the thread but do any of you know of anyone with a gold card that works. thats the 01 cards. Got one myself and trying to get it to work in the dm800.

thanks for your reply, i am sorry that it has been so long in replying but I had given up for a while trying. Does anyone know if the internal emu can handle cryptoworks or do I need to pass this to cccam.

Hi

could any one help me out with oscam configs and settings for dm800 original plus internal reader, also which channel to update blue dragon card on.

ki