Posts by anniman

a good laptop to buy with xp and a serial port is http://www.ebay.co.uk/itm/CHEAP-Panasonic-ToughBook-CF-29-Laptop-1-5Gb-Ram-Office-SERIAL-PORT-WiFi-/321221869846?pt=UK_Computing_Laptops_EH&hash=item4aca50c116

done that and now I get high ecm times like over 500ms randomly. whats happened now?

where do I get the served and services from again. thanks for your help

just checked and I'm getting it from my card only. what is going on here?

nope, still got the same problem. gonna try ver 9160 as suggested on here

ah, would that only be caused by cacheex?

I find that a twin tuner uno is twice as good as the duo1 and silent. I'm going to try a ultimo triple next unless anyone has anything bad to say about them

why does this occur when watching *** sports 1 hd. I cacheex, several people get it ok and then now and again 1 will get by not found 0ms and sometimes it can last a few ecms and of course frozen picture.
does anyone know how to cure this. I'm using 9040 but it happens on all versions

ok I just subbed. does this look ok for entitlements? and will they automatically get pushed to the correct reader
[reader]
label = ***uk
protocol = internal
device = /dev/sci0
fallback = 1
caid = 0963
detect = cd
mhz = 500
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

[reader]
label = setanta
protocol = internal
device = /dev/sci1
fallback = 1
caid = 0963
detect = cd
mhz = 500
ident = 0963:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

[account]
user = linuxsat
pwd = support
caid = 0963
au = setanta,***uk
group = 1,2
cccreshare = 1

I found out what was stopping the other reader from working. I had to swutch my box off and on, not just restart the emulator

clients?....

that's why I want it in my uno along with the main one as I know that updates but still unable to run both slots at once due to resource busy. I take it both cam slots should work at the same time using the loadbalancer?

no, it is using dev/sci0 , top slot. sci1 should be the bottom slot right.
I'm getting closer. in my dreambox I can see the entitlements ran out 21/11/2011. if I order setanta on this card it should update it, is that correct

this was a successful start attempt and its working. I take it the changeset is in the wiki?

ok that was in my dreambox in my uno trying to use the second card slot I get resource busy when trying to use 2 slots at the same time

***uk2 [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/01/10 21:35:36 76F04418 r ***uk2 [internal] Cannot open device: /dev/sci1

oscam 9040

now I'm getting this

2014/01/10 21:01:45 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9257 (mipsel-unknown-linux-gnu)
2014/01/10 21:01:45 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12627
2014/01/10 21:01:45 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/01/10 21:01:45 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/01/10 21:01:45 0 s signal handling initialized
2014/01/10 21:01:45 0 s 903 service-id's loaded in 39ms
2014/01/10 21:01:45 0 s newcamd: initialized (fd=5, port=10000)
2014/01/10 21:01:45 0 s -> CAID: 0963 PROVID: 000000
2014/01/10 21:01:45 0 s cccam: initialized (fd=6, port=12000)
2014/01/10 21:01:45 0 s ***uk [internal] creating thread for device /dev/sci0
2014/01/10 21:01:45 52D270 h webif: decompressed 62494 bytes back into 179616 bytes
2014/01/10 21:01:45 52D270 h HTTP Server running. ip=0.0.0.0 port=8888
2014/01/10 21:01:45 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/10 21:01:45 0 s anti cascading disabled
2014/01/10 21:01:45 52B2E8 r ***uk [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2014/01/10 21:01:46 52B2E8 r ***uk [internal] card detected
2014/01/10 21:01:47 52B2E8 r ***uk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2014/01/10 21:01:47 52B2E8 r ***uk [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/10 21:01:47 52B2E8 r ***uk [internal] Calculated work ETU is 18.60 us reader mhz = 500
2014/01/10 21:01:47 52B2E8 r ***uk [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/10 21:01:50 52B2E8 r ***uk [internal] card system not supported
2014/01/10 21:01:50 52B2E8 r ***uk [internal] Normal mode failed, reverting to Deprecated Mode
2014/01/10 21:01:51 52B2E8 r ***uk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2014/01/10 21:01:51 52B2E8 r ***uk [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/10 21:01:51 52B2E8 r ***uk [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/10 21:01:51 52B2E8 r ***uk [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/10 21:01:54 52B2E8 r ***uk [internal] card system not supported
2014/01/10 21:01:54 52B2E8 r ***uk [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/10 21:01:54 52B2E8 r ***uk [internal] card initializing error
2014/01/10 21:02:03 550888 c client connected to 10000 port
2014/01/10 21:02:03 550888 c encrypted newcamd:10000-client 127.0.0.1 granted (dummy, au=on (1 reader))
2014/01/10 21:02:03 550888 c user dummy authenticated successfully (CCcam)
2014/01/10 21:02:03 550888 c AU disabled for user dummy

why would it not be supported?

I've got an irish card for setanta as well as my normal uk card. the problem is when I start the reader then no cards are read my config is
[reader]
label = s*yuk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 500
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = *****
protocol = cccam
device = ******.secretdns,4828
user = user
password =password
inactivitytimeout = 30
cacheex = 3
cacheex_maxhop = 2
caid = 0963
ident = 0963:000000
group = 1,10
emmcache = 1,3,2
cccversion = 2.1.3
cccmaxhops = 0
ccckeepalive = 1

[reader]
label = ***uk2
enable = 0
protocol = internal
device = /dev/sci1
caid = 0963
detect = cd
mhz = 500
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

the log shows the card as
resource busy /dev/sci1. is there a conflict between slot 1 and slot 2. I'm cacheexing also. I thought I just added a reader and pressed save

try putting your work address in the httpallowed

depends what kind. there are many step by step tutorials in the Linux pc section

what other standalone channels can you add to a **y freeview card apart from bt sports?

I've had 2 sf8s from the sponsor but not the technomate. using the openatv image it does everything but sometimes its hard to get it to mount a drive. I just use a network drive no probs. its the lack of images at the moment that lets it down, now if it had blackhole...