i know what the channel numbers should be as i still have a box downstairs so premier should be 301 and sports1 should be 401 but 301 is premier +1 and 401 is sports2 so then all the numbers from that point are 1 ahead and then from the 600's are 2 numbers ahead. nick jr is 617 and it should be 615. just wondering if anybody else has this problem as with silverfox's version all the numbers are spot on
Posts by anniman
-
-
the numbers match until the movies and then are one off and then by the kids section are two off or is it me
-
one thing i forgot to ask was is it just a normal splitter i'm using or is it a diseq switch to switch bands?
-
so instead of having loads of wires for my 5 boxes pulling the dish off the wall i can have one quattro with a single wire and then split the signal in the loft space. would i need four splitters - 1 for each output. how many bands are required for watching *** then?
-
When would you need to use one of these and what benefit does it give you. is iy for blocks of flats to connect to a splitter or am i wrong?
-
this image plays recording from hdd on clones, good. nice look but whats with the epg. i cant get crossepg to show anything
-
now of course you get 400hz active screens. this really does help with the sharpness of a 3d image especially on a moving image. dont go for plasma as the picture brightness is still too dim.
-
sounds like its been bricked. no bootloader, usually it will have a ca error on the front with a corrupted boatloader. what image was it on?
-
-
does anyone know what size capicitor you use to change a dm800 rev L to rev M spec and wher does it get soldered onto?
-
well i've got to say 7 is crap for serial ports. it does not have the functionality of xp that way. i bought 2 different serial to usb converters and 7 cant install drivers. even the manufacturers 7 drivers dont work. i had to dig out an old pc with a built in serial port on xp to program my dreambox
-
do any clone images play recordings through the pvr, all the images i try are just black screen
-
its not the 3 digit code its the 4 digit at the bottom of the list
-
why is it sometimes when i'm running my box and do a hard restart the is no tuner detected. i thought it was the image so flashed but same again. is this what happens when the tuner overheats? it says no nims detected. when it does run the s/r is as much as 15. its a dm800 clone with a nemisis image
-
why is it sometimes when i'm running my box and do a hard restart the is no tuner detected. i thought it was the image so flashed but same again. is this what happens when the tuner overheats? it says no nims detected. when it does run the s/r is as much as 15. its a dm800 clone with a nemisis image
-
Display More
Hi, this is not from myself...
1-download setedit 100HD & install
2-download the dreambox setedit (not registrered) plugin from setedit de & install
5-download hannibal or other settings for dreambox
6-open an SW abs file for s9-s10
7-on menu, new file, choose dream & a new window appear
8-open the dreambox settings, choose your channels-favorite
9-paste into abs file settings, when finish, save & send the new SW abs file with USB
Now all channels is there:78:
** don´t try to change the favorite name with setedit won´t work, rename it
with the remote
10-make a dump TP_PRG so you have only the channels & can send it in new img with STBH_lan or with USB
:21_002:
stedit wont open any abs files for me, error on opening file -
samsung 3d tellys do that anyway. you have to have a 3d telly to start with so spending another 80 quid is a waste. just buy a samsung. the effect with 2d to 3d conversion is like looking into a box with depth not like a real 3d source that comes out the way but still better than flat
-
not really. as long as the speeds are the same so you cant use a 200 mbps plug and a 85 mbps it would have to be 2 x 85 mbps or 2 x 200 mbps
-
so if you have 2 lines you can put one in each of the boxes. is that what you mean
