Posts by hooley

  • bouquets and channel lists for openbox

    Ill be home in an hour and ill go through it again on my box, i cant think off the top of my head what the process is. Just try putting the file that ends in .dbs on your usb, its in the TP_PROG folder and go through the process

  • bouquets and channel lists for openbox

    Quote from fatlad

    hooley downloaded w4ynes channel list what will be my best way to send it to the box


    Cheers



    To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.


    Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
    then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
    when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
    Once the file have been installed, reboot the receiver.

  • My openbox is blocked

    Quote from Srab-Wazemmes

    I have use un laptops, with usb rs232 and null modem cable



    That's ok, but I was helping a lad last week with the same problem as you. He tried lots of different loaders and was getting nowhere. I kept telling him to try and use a desktop pc. In the end he got his box fixed by taking my advice.

  • My openbox is blocked

    An original Openbox is a great box for the price, especially because of its ease of use and its hd.
    In my opinion you should contact the supplier and tell them you have a problem and want to return the box.
    The Dm500 is a great box for starting off but its not hd. Have a look at to our sponsors, Creative Satellite for a good, reliable box

  • How to edit Openbox S9 Settings (TP_PROG.dbs)

    How to edit Openbox S9 Settings (TP_PROG.dbs)


    Using editor here http://linuxsat-shares.com/ope…ox_s9_channel_editor.html


    First scan you satellites on receiver or use an existing posted file.
    If using the one from you receiver, go to Menu, Tools, Dump to Usb, Misc Files and Chose TP_PROG.dbs
    Press yellow to dump to usb


    After having you file, you need to change extension to *abs so the editor can recognize it.
    how to change extension names http://linuxsat-shares.com/ope…n-dbs-abs-openbox-s9.html


    Next , read here How to use Serial Uploader.pdf


    Dont forget to the extension back to .dbs when you are finished.
    To create favourites, look here http://linuxsat-shares.com/ope…nels-favourite-group.html


    Heres a pdf http://www.mediafire.com/?zaqph7e8av5m924

  • bouquets and channel lists for openbox



    Hi, unfortunately you can only use the channel list that is on your box or use one that is uploaded here on this site. You can of course make one to suit your needs with the channel editor on this site.
    You cant use bouqets from silverfox or flipflop.
    There are channel lists and editors here Openbox Software and Tools

  • Openbox signal

    Quote from choozay

    my open box is showing 45% strength and 5% quality!


    wen i plug the lnb to my orginal sky box it works fine!! help plz
    going to my other house to rule out a dish issue



    Choozay make sure your Default LNB Setting: Universal [9750 - 10600]

  • L53 Openbox S9 Multi-Satellite Channel List v4.20 - [02 April 2011]

    L53 Openbox S9 Multi-Satellite Channel List v4.20 - [02 April 2011]




    This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.


    ---------------------------------------------------------------------------

    Just remember to allow your common sense to prevail .... and to always download the L53 files from the source [**********], as we can not guarantee the authenticity of our files if downloaded from another location, and also take the time to read the instructions contained within the zip file, of course if any of the original files are missing, or any extra files included, then the file have obviously been tampered with, in one way or another, and should therefore obviously be avoided, and not installed.

    Each of our zipped L53 Channel List files, will consist of the following 4 files only:
    1 .. TP_PROG.dbs
    2 .. Constant file
    3 .. Replace file
    4 .. Channel List Instructions file.



    The genuine checksum value for the files will be posted in the following: Firmware and Channel list sections.

    You should verify each zip before unzipping and installing the file, otherwise we can not guarantee it, as it may have been tampered with in one way or another, the MD5 option is to ensure your safety.

    If the checksum value do not match the Zip file perfectly then you should delete it, and download the genuine file.
    THERES NO LOGICAL REASON FOR REMOVING, EDITING OR INCLUDING ANY FILES TO THE ORIGINAL ZIP.


    This is a multi-satellite channel list covering satellites from 30west to 45east.
    It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.

    Default Settings:
    Channel list format: .dbs
    Default Motor Setting: DisEqC 1.2.
    Default LNB Setting: Universal [9750 - 10600]
    Radio Channels: 0
    Favorite Channels: 0

    If used in an external channel editor, change extension from .dbs to .abs
    once you have edited the channel list, change the extension back to .dbs
    ---------------------------------------------------------------------------

    What's New:
    Updated channels on various satellites including: 5w, 1w, 7e, 13e 16e, 21.5e & 28.2e.

    I believe all the channels that caused rebooting problems, have now all been removed.

    To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.

    I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
    Of course if you already have them installed, then simply ignore them.
    ---------------------------------------------------------------------------

    Please Note:
    To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
    To remove all channels, click Menu -> Edit Channel -> Delete All

    To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.

    Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
    then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
    when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
    Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
    Open Box Channel List 02.04.2011.rar

  • Openbox Record Manager

    As has been said already the openbox will only play the dvr format. In all my time of reading about this box on various forums iv never read about anyone getting something different to work. Maybe in the future this will change, and a better epg ( please )