Posts by Compo
-
-
No It means you have a clone with a sim in it that can take original images.
OpenPLI no longer support dreamboxes. Well it seems they do the DM8000
The openpli images you see are manufactured by the sim groups for respective clone sims.
Use the OpenATV image
-
Just replied above !
-
Finally, I found solution.
Before using Dream up. I had to install CP210 Windows drivers first. Now it is ok. My next problem is the image I put provide same problem. Always no CA found. I am sure it is DM800 SE clone but I don't know it is Sim 2.1 or Sim 2.01. How to check the right Sim xxx?
Take the lid off as look at the sim its on the right hand side of the box at the front of the PCB
-
Best tool to use is Japhar Flasher, this is a patched Dreamup.
Connect both Micro USB and ethernet cable fill out the ip ranges. and select the USB cable port.
Power off the SE then click connect in japhar flasher then power on the SE.
It should then connect and allow you to flash an image.
-
I have the same problem scanned every transponder o service found how can I resolve this issue
First thing to do is check your signal strength if it is low it could indicate the dish is not position correctly, this assumes its a sat tuner and not cable.
You dont really give enough info to give you a definitive answer.
-
-
Not on this one youll need an image after the 21st of November
-
Suspect the image not been in the flash was the reason for your problems. I would not do the image flash as i suspect it will choose the nand and not usb.
-
Coincidence maybe.
I'd be looking at your power levels take in look at them in your modems webinterface, usual stuff check all the connections are tight to the splitter etc.
-
hi mate, please check pictures my bootflash dm800sev2
please advise image suitable as above pictures.
Thanks..
As long as you use the v2 version
-
No maybe Hounra can knock up a 6.1 for it ?
-
There is nothing i know of yet that fixes the nar problem on the 800
-
gjstroom does not build images for the 800 now mate.
-
Varoius IPTV apps work on sim2 clones
Tsmedia,IPTVPlayer and even the ciefp motorized channel setting have VOD/IPTV listings in it.
-
my mates all way use openvix on his Zgemma LC is there an update for that anywhere, I have looked?
thanks
There is but it is an unofficial build in that a third party has patch it to run on your box its not a supported box by vix.
-
OpenBlackhole have the fix applied but not blackhole
-
-
Not there as in no channel in the channel list ?
Rescanning not help with that ?
-
can anyone upload abm 2.9 please ?