ciao ,non si riesce ad istallare drivers per il triplo tuner.
See this thread mate
ciao ,non si riesce ad istallare drivers per il triplo tuner.
See this thread mate
I would use OpenATV or OpenPLI out of those 4
Attached for you
TrialTuner Driver 2.0b for DM800se v2
Compiled by Bobsilvio -Danke>Thanks>Grazie
Thanks PRZ_Team for source code
nfo :ipk gefixt zum installieren ohne telnet kommandos,
fixed ipk install without telnet commands,
So with the ipk supplied by master g no PowerVU opens ?
Did you install the new drivers to the openpli image or were they included if so can you be sure of this ?
What sat positions are you trying to open ?
somebody some solution pls thx.
Have you also used the updated drivers ?
/usr/softcams for the bin file.
Oscam is the cam these days for CS and can handle nlines , it will also be needed for PowerVU and the Softcam.key file.
Thats the latest version assuming it has the powervu patch applied this attached has.
Now you need to make the channel list. It does require the ECM in http streams setting. Not used that image but maybe it can be set via the images webinterface.
Im going to struggle to help you then mate.
Here are known working configs just make sure key location is correct and stream relay is enabled.
oscam.config
QuoteDisplay More[global]
logfile = /var/log/oscam.log
unlockparental = 1
nice = -1
maxlogsize = 1024
preferlocalcards = 1
cwlogdir = /var/log/cw/
emmlogdir = /var/log/emm.log/
[streamrelay]
stream_ecm_delay = 800
stream_relay_enabled = 1
stream_emm_enabled = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 8888
httptpl = /usr/keys/oscam_atv_emu
httphelplang = en
httplocale = en
httprefresh = 10
httppollrefresh = 10
httpallowed = 192.168.0.0-255.255.255.255
oscam.server
QuoteDisplay More[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,0604,0E00,1010,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0604:000000;0E00:000000;1010:000000;FFFF:000000;2600:000000;0100:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;0500:023800;0500:D00040;0500:030B00
oscam.user
QuoteDisplay More[account]
user = dvbapi
uniq = 3
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7,
To test go to a powerVU channel via your webinterface 9 east as those keys have not changed in a while.
Select stream and download the m3U file, open this in notepad++ to show the details.
Now fire up Dreamboxedit and create a new bouquet lable it powervu then add the the channel to that bouquet under the IPTV protocol.
Now the above assumes you have some knowledge and this is a very long winded process so try if you get stuck ill chirp back in.
Dont see anything wrong with those.
You do know with stream relay it wont open the scanned in channel you need to add the stream source to your bouquet under IPTV settings ?
This is the latest PowerVU version patched by juli13 its working well.
If your using a clone your going to need to use stream relay as the hardware is different enough from the original to need to do so.
Thanks compo, how do I go about getting android in nand.?
What You will need:
1. Micro SD
2. recovery.img and factory_update_param.aml file
3. WeTek Play Android Firmware .zip file
File preparation:
After downloading WeTek OS Firmware .zip file, copy it together with recovery.img and factory_update_param.aml to Micro SD card.
Keep in mind that you will need to edit factory_update_param.aml to match exact name of WeTek OS Firmware .zip file.
For example, if WeTek OS Firmware .zip file have name DB-J483-wetek-ota-2015-03-11_15-37-22.zip , your factory_update_param.aml will have this content:
--wipe_cache
--wipe_media
--wipe_data
--update_package=/udisk/DB-J483-wetek-ota-2015-03-11_15-37-22.zip
After you successfully edit factory_update_param.aml , please turn off your WeTek Play, insert MicroSD in WeTek Play, and watch this Video:
WeTek Play - How to manually update WeTek Play Android software
You need to have the latest Android version installed in the nand to run OpenElec off an SD card.
I prefer to run LibreElec though to be honest.
Does any one have the Samsung K9K8G08U0D.xml file ?
This is i think the correct file for the flash nand in the ultimo not the one quoted in the VU.pdf guide.
regards
Display MoreHi
Trying to jtag a Ultimo.
Anyone come across this error before?
I get connected fine the problem comes when selecting the flash file K9FG08U0A and then refreshing I get this error.
Device id returned from the flash: D3 does not match
Any ideas ?
Have a gut feeling the K9FG08UAO xml file is the problem.
Anyone have a later version ?
Hi
Trying to jtag a Ultimo.
Anyone come across this error before?
I get connected fine the problem comes when selecting the flash file K9FG08U0A and then refreshing I get this error.
Device id returned from the flash: D3 does not match
Any ideas ?