PowerVu Not Opening Dm800Se - Please Help
- mcmuzzy
- Thread is marked as Resolved.
-
-
Remove all the readers from oscam.server. oscam-emu creates a reader itself for emulator.
Rest of your configs look fine.
-
thankyou Master G i will try it now.
However could you please advise or help me to where can i get the powervu keys for Intelsat 19
Also should oscam be as cardserver or softcam or both
-
Also should oscam be as cardserver or softcam or both
If you`re not acting as a server use softcam.
I can`t test that satellite so can only suggest keys from here -> SoftCam Keys
-
-
Could some kind person please advise me where i have gone wrong her or what i am missing i keep getting this error
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
and
c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
oscam log
- 2016/06/06 20:55:30 00000000 s (main) System name = Linux
- 2016/06/06 20:55:30 00000000 s (main) Host name = dm800se
- 2016/06/06 20:55:30 00000000 s (main) Release = 3.2-dm800se
- 2016/06/06 20:55:30 00000000 s (main) Version = #1 SMP Sat Aug 27 02:02:13 CEST 2016
- 2016/06/06 20:55:30 00000000 s (main) Machine = mips
- 2016/06/06 20:55:30 00000000 s (main) Stb model = dm800se
- 2016/06/06 20:55:30 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 14458
- 2016/06/06 20:55:30 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
- 2016/06/06 20:55:30 00000000 s [Emu] oscam-emu version 728
- 2016/06/06 20:55:30 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
- 2016/06/06 20:55:30 00000000 s (main) signal handling initialized
- 2016/06/06 20:55:30 00000000 s (config) 5 provid's loaded
- 2016/06/06 20:55:30 00000000 s (config) 9 service-id's loaded in 0 ms
- 2016/06/06 20:55:30 00000000 s (config) 3 tier-id's loaded
- 2016/06/06 20:55:30 00000000 s (config) 1 lengths for caid guessing loaded
- 2016/06/06 20:55:30 00000000 s (net) newcamd: initialized (fd=5, port=16003)
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 4AD1 PROVID: 000000
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 0E00 PROVID: 000000
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 5604 PROVID: 000000
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 1861 PROVID: 1F1F1F
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 0500 PROVID: 000000
- 2016/06/06 20:55:30 00000000 s (net) -> CAID: 1010 PROVID: 000000
- 2016/06/06 20:55:30 00000000 s (reader) oscam_emu [emu] creating thread for device emulator
- 2016/06/06 20:55:30 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
- 2016/06/06 20:55:30 00000000 s (main) waiting for local card init
- 2016/06/06 20:55:30 5864C916 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
- 2016/06/06 20:55:30 5864C916 r (reader) oscam_emu [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
- 2016/06/06 20:55:30 00000000 [Emu] info: FFDecsa parallel mode = 64
- 2016/06/06 20:55:30 70A0BB95 h (webif) webif: decompressed 160193 bytes back into 387464 bytes
- 2016/06/06 20:55:30 70A0BB95 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
- 2016/06/06 20:55:31 5864C916 r (reader) oscam_emu [emu] card detected
- 2016/06/06 20:55:32 5864C916 r (reader) oscam_emu [emu] found card system emu
- 2016/06/06 20:55:32 5864C916 r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2016/06/06 20:55:32 5864C916 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
- 2016/06/06 20:55:32 00000000 s (main) init for all local cards done
- 2016/06/06 20:55:32 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
- 2016/06/06 20:55:32 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
- 2016/06/06 20:55:32 00000000 s (anticasc) anti cascading disabled
- 2016/06/06 20:55:32 0AC6132B c (client) plain dvbapi-client granted (localuser, au=auto (1 reader))
- 2016/06/06 20:55:32 0AC6132B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
- 2016/06/06 20:55:32 0AC6132B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 0)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 23)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
- 2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
- 2016/06/06 20:55:40 0AC6132B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2016/06/06 20:55:43 0AC6132B c (dvbapi) Demuxer 0 stop descrambling program number 0004 (Sports+Action)
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 0)
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
- 2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
-
ok i got the emu up and running now on openpli 6.0 in my dm800se but i am getting this now. (i am using oscam as softcam)
2016/06/08 17:46:21 342FD8C5 r (emu) Key not found: P 0586 01
2016/06/08 17:46:21 342FD8C5 r (emu) ECM failed: Key not found
2016/06/08 17:46:21 2C513ED9 c (ecm) linuxsatsupport (0E00@000000/0000/0586/40:7B77C03F9D2C96D5118FD3914539529A): not found (4 ms) by oscam_emu - Discovery New Zealandam i missing a file or a config somewhere ? Please feel free to advise me .
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8888
httpuser = XXXXXXX
httppwd = XXXXXXXX
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
[newcamd]
port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[account]
description = dvbapi
user = linuxsatsupport
group = 1
[reader]
label = oscam_emu
enable = 1
protocol = emu
device = emulator
caid = 4AD1,0E00,5604,1861,0500,1010
detect = cd
group = 1
-
If your using a clone your going to need to use stream relay as the hardware is different enough from the original to need to do so.
-
ok kool thankyou for that i have added my configs here . could you please tell me what i have done wrong and if i am missing anything Such as editing additional files. On the log now i am getting this
- 2017/10/18 10:18:27 21F4FFEC c (ecm) linuxsatsupport (0E00@000000/0000/0586/40:F9A75586B262D34A4A21FEC88C181611): not found (1 ms) by emulator - Discovery New Zealand
- 2017/10/18 10:18:28 21F4FFEC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
- 2017/10/18 10:18:28 21F4FFEC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1526 VPID 08FC
- 2017/10/18 10:18:28 67F5BE72 r (emu) Key not found: P 0586 01
- 2017/10/18 10:18:28 67F5BE72 r (emu) ECM failed: Key not found
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[streamrelay]
stream_relay_enabled = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8888
httpuser = XXXXXXXX
httppwd = XXXXXXXXX
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1
[newcamd]
port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[account]
description = dvbapi
user = linuxsatsupport
group = 1
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000011,000014,0000FE;1010:000000
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE
group = 1
[Softcam.keys]30.05.2017 - Intelsat 19 @ 166.0E ECM
Discovery Networks Asia-Pacific
3980 H 30000-2/3
DVB-S2 8PSK
P 067C 00 874392CE8C3020FF
DSC Asia Pacific
P 067C 01 211214410FD467FF
DSC Asia Pacific
30.05.2017 - Intelsat 19 @ 166.0E ECM
Intelsat 3940 H 27690-7/8
DVB-S QPSK
P 067C 00 16DE199DA44BD4FF
ESPN / TV 5 Monde
P 067C 01 ACF70F8EB19865FF
ESPN / TV 5 Monde
30.05.2017 - Intelsat 19 @ 166.0E ECM
Discovery Networks Asia-Pacific
3760 V 30000-3/4 DVB-S2 8PSK
P 067C 00 874392CE8C3020FF
DSC Philippines
P 067C 01 211214410FD467FF
DSC Philippines
and the constant.cw file i have the same as the Softcam.keys.
-
Dont see anything wrong with those.
You do know with stream relay it wont open the scanned in channel you need to add the stream source to your bouquet under IPTV settings ?
-
no i didn't know that how do you do that . Also how do i know if the keys are correct and if tjey are in the correct format because of this
- 2017/10/18 10:18:28 67F5BE72 r (emu) Key not found: P 0586 01
- 2017/10/18 10:18:28 67F5BE72 r (emu) ECM failed: Key not found
Also the constant.cw file could you please advise me if i still need that and if so what is the format for it please
I also wnet to my webif in openpli 6.0 and there is no option for the stream relay in the webif under customise
-
To test go to a powerVU channel via your webinterface 9 east as those keys have not changed in a while.
Select stream and download the m3U file, open this in notepad++ to show the details.
Now fire up Dreamboxedit and create a new bouquet lable it powervu then add the the channel to that bouquet under the IPTV protocol.
Now the above assumes you have some knowledge and this is a very long winded process so try if you get stuck ill chirp back in.
-
i cant test that satellite as i am in Australia and out of range also my cband dish is honed into Intelsat19 and its fixed (no motor)
This is why i need at least one current key set for intelsat 19
-
Im going to struggle to help you then mate.
Here are known working configs just make sure key location is correct and stream relay is enabled.
oscam.config
Quote[global]
logfile = /var/log/oscam.log
unlockparental = 1
nice = -1
maxlogsize = 1024
preferlocalcards = 1
cwlogdir = /var/log/cw/
emmlogdir = /var/log/emm.log/
[streamrelay]
stream_ecm_delay = 800
stream_relay_enabled = 1
stream_emm_enabled = 1[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 8888
httptpl = /usr/keys/oscam_atv_emu
httphelplang = en
httplocale = en
httprefresh = 10
httppollrefresh = 10
httpallowed = 192.168.0.0-255.255.255.255
oscam.server
Quote[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,0604,0E00,1010,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0604:000000;0E00:000000;1010:000000;FFFF:000000;2600:000000;0100:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;0500:023800;0500:D00040;0500:030B00
oscam.user
Quote[account]
user = dvbapi
uniq = 3
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7,
-
ok i have placed these configs in my oscam and replaced my old configs . the Softcam.keys file is in /etc/tuxbox/config/oscam/
i went to type the IP_of _your_box and go to settings >> customise >> and check the box Include ECM in http streams but the option is not there in openpli 6.0
i am also using
oscam-svn11391-openpli40-webif-emu (is that the correct one ?)
Would you recommend a different image or different oscam
-
Thats the latest version assuming it has the powervu patch applied this attached has.
Now you need to make the channel list. It does require the ECM in http streams setting. Not used that image but maybe it can be set via the images webinterface.
-
ok so should i go to openpli 4.0 or a different image all together. Which image is known to have the ECM in http streams setting option
-
i found openpli 4.0 and install andi first checked if it has the options for ECM in http streams setting and it does. I am putting in the rest of the configs now
i also noticed that this image has softcam and cs so if i wanted could i use oscam as cs and cccam or mgcamd to softcam as u would a normal server with nline in cccam.cfg or cws in newcamd.list ? -
Oscam is the cam these days for CS and can handle nlines , it will also be needed for PowerVU and the Softcam.key file.
-
ok i have put everything in now and have have ticked the ECM in http streams setting option
i am still getting this
- 2016/06/09 08:09:08 1A16A32A c (ecm) dvbapi (0E00@000000/0000/001A/40:8DCBA7AB570F63924967F3133330C149): not found (2 ms) by emulator - ESPN
- 2016/06/09 08:09:09 1A16A32A c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
- 2016/06/09 08:09:09 1A16A32A c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 178A ANY CHID PMTPID 13A2 VPID 0A64
- 2016/06/09 08:09:09 3D7F0832 r (emu) Key not found: P 001A 00
- 2016/06/09 08:09:09 3D7F0832 r (emu) ECM failed: Key not found
OSCam-EMU Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!