PowerVu Not Opening Dm800Se - Please Help

mcmuzzy · Oct 14th 2017

Hi there

have been trying to open Powervu Channels on intelsat19 with no luck using my Dm800se.

If anyone could please have a look at my log and my configs which are attached below and help me i would be so grateful.

Thanking you in advance

Files.rar

**master G** · Oct 15th 2017

Remove all the readers from oscam.server. oscam-emu creates a reader itself for emulator.

Rest of your configs look fine.

mcmuzzy · Oct 15th 2017

thankyou Master G i will try it now.

However could you please advise or help me to where can i get the powervu keys for Intelsat 19

Also should oscam be as cardserver or softcam or both

**master G** · Oct 15th 2017

Quote from mcmuzzy

Also should oscam be as cardserver or softcam or both

If you`re not acting as a server use softcam.

I can`t test that satellite so can only suggest keys from here -> SoftCam Keys

mcmuzzy · Oct 15th 2017

ok kool well i removed the servers as you suggested and this is my log now. I am not exactly sure what is missing

i think the main error is

(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

log.txt

mcmuzzy · Oct 16th 2017

Could some kind person please advise me where i have gone wrong her or what i am missing i keep getting this error

(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

and

c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

oscam log

2016/06/06 20:55:30 00000000 s (main) System name = Linux
2016/06/06 20:55:30 00000000 s (main) Host name = dm800se
2016/06/06 20:55:30 00000000 s (main) Release = 3.2-dm800se
2016/06/06 20:55:30 00000000 s (main) Version = #1 SMP Sat Aug 27 02:02:13 CEST 2016
2016/06/06 20:55:30 00000000 s (main) Machine = mips
2016/06/06 20:55:30 00000000 s (main) Stb model = dm800se
2016/06/06 20:55:30 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 14458
2016/06/06 20:55:30 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2016/06/06 20:55:30 00000000 s [Emu] oscam-emu version 728
2016/06/06 20:55:30 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/06/06 20:55:30 00000000 s (main) signal handling initialized
2016/06/06 20:55:30 00000000 s (config) 5 provid's loaded
2016/06/06 20:55:30 00000000 s (config) 9 service-id's loaded in 0 ms
2016/06/06 20:55:30 00000000 s (config) 3 tier-id's loaded
2016/06/06 20:55:30 00000000 s (config) 1 lengths for caid guessing loaded
2016/06/06 20:55:30 00000000 s (net) newcamd: initialized (fd=5, port=16003)
2016/06/06 20:55:30 00000000 s (net) -> CAID: 4AD1 PROVID: 000000
2016/06/06 20:55:30 00000000 s (net) -> CAID: 0E00 PROVID: 000000
2016/06/06 20:55:30 00000000 s (net) -> CAID: 5604 PROVID: 000000
2016/06/06 20:55:30 00000000 s (net) -> CAID: 1861 PROVID: 1F1F1F
2016/06/06 20:55:30 00000000 s (net) -> CAID: 0500 PROVID: 000000
2016/06/06 20:55:30 00000000 s (net) -> CAID: 1010 PROVID: 000000
2016/06/06 20:55:30 00000000 s (reader) oscam_emu [emu] creating thread for device emulator
2016/06/06 20:55:30 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/06 20:55:30 00000000 s (main) waiting for local card init
2016/06/06 20:55:30 5864C916 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
2016/06/06 20:55:30 5864C916 r (reader) oscam_emu [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2016/06/06 20:55:30 00000000 [Emu] info: FFDecsa parallel mode = 64
2016/06/06 20:55:30 70A0BB95 h (webif) webif: decompressed 160193 bytes back into 387464 bytes
2016/06/06 20:55:30 70A0BB95 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/06/06 20:55:31 5864C916 r (reader) oscam_emu [emu] card detected
2016/06/06 20:55:32 5864C916 r (reader) oscam_emu [emu] found card system emu
2016/06/06 20:55:32 5864C916 r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/06/06 20:55:32 5864C916 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
2016/06/06 20:55:32 00000000 s (main) init for all local cards done
2016/06/06 20:55:32 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2016/06/06 20:55:32 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2016/06/06 20:55:32 00000000 s (anticasc) anti cascading disabled
2016/06/06 20:55:32 0AC6132B c (client) plain dvbapi-client granted (localuser, au=auto (1 reader))
2016/06/06 20:55:32 0AC6132B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2016/06/06 20:55:32 0AC6132B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 0)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 23)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/06/06 20:55:36 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
2016/06/06 20:55:40 0AC6132B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/06/06 20:55:43 0AC6132B c (dvbapi) Demuxer 0 stop descrambling program number 0004 (Sports+Action)
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1773 PROVID: 000000
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00dc length: 0)
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00dd length: 0)
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 1010 length: 0)
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 serving srvid 0004 (Sports+Action) on adapter 0000 camask 0001 index 0000 pmtpid 138C
2016/06/06 20:55:45 0AC6132B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

mcmuzzy · Oct 18th 2017

ok i got the emu up and running now on openpli 6.0 in my dm800se but i am getting this now. (i am using oscam as softcam)

2016/06/08 17:46:21 342FD8C5 r (emu) Key not found: P 0586 01

2016/06/08 17:46:21 342FD8C5 r (emu) ECM failed: Key not found
2016/06/08 17:46:21 2C513ED9 c (ecm) linuxsatsupport (0E00@000000/0000/0586/40:7B77C03F9D2C96D5118FD3914539529A): not found (4 ms) by oscam_emu - Discovery New Zealand

am i missing a file or a config somewhere ? Please feel free to advise me .

[global]

logfile = /dev/tty

clienttimeout = 4000

clientmaxidle = 300

netprio = 1

nice = -1

maxlogsize = 1000

waitforcards = 0

preferlocalcards = 1

dropdups = 1

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

user = linuxsatsupport

read_sdt = 1

write_sdt_prov = 1

boxtype = dreambox

[webif]

httpport = 8888

httpuser = XXXXXXX

httppwd = XXXXXXXX

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

[newcamd]

port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000

key = 0102030405060708091011121314

mgclient = 1

keepalive = 1

[cccam]

port = 12000

version = 2.1.3

build = 3165

reshare = 1

[account]

description = dvbapi

user = linuxsatsupport

group = 1

[reader]

label = oscam_emu

enable = 1

protocol = emu

device = emulator

caid = 4AD1,0E00,5604,1861,0500,1010

detect = cd

group = 1

**Compo** · Oct 18th 2017

If your using a clone your going to need to use stream relay as the hardware is different enough from the original to need to do so.

mcmuzzy · Oct 18th 2017

ok kool thankyou for that i have added my configs here . could you please tell me what i have done wrong and if i am missing anything Such as editing additional files. On the log now i am getting this

2017/10/18 10:18:27 21F4FFEC c (ecm) linuxsatsupport (0E00@000000/0000/0586/40:F9A75586B262D34A4A21FEC88C181611): not found (1 ms) by emulator - Discovery New Zealand
2017/10/18 10:18:28 21F4FFEC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2017/10/18 10:18:28 21F4FFEC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1526 VPID 08FC
2017/10/18 10:18:28 67F5BE72 r (emu) Key not found: P 0586 01
2017/10/18 10:18:28 67F5BE72 r (emu) ECM failed: Key not found

[global]

logfile = /dev/tty

clienttimeout = 4000

clientmaxidle = 300

netprio = 1

nice = -1

maxlogsize = 1000

waitforcards = 0

preferlocalcards = 1

dropdups = 1

[streamrelay]

stream_relay_enabled = 1

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

user = linuxsatsupport

read_sdt = 1

write_sdt_prov = 1

boxtype = dreambox

[webif]

httpport = 8888

httpuser = XXXXXXXX

httppwd = XXXXXXXXX

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

http_status_log = 1

[newcamd]

port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000

key = 0102030405060708091011121314

mgclient = 1

keepalive = 1

[cccam]

port = 12000

version = 2.1.3

build = 3165

reshare = 1

[account]

description = dvbapi

user = linuxsatsupport

group = 1

[reader]

label = emulator

protocol = emu

device = emulator

caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

detect = cd

ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000011,000014,0000FE;1010:000000

emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE

group = 1

[Softcam.keys]

30.05.2017 - Intelsat 19 @ 166.0E ECM

Discovery Networks Asia-Pacific

3980 H 30000-2/3

DVB-S2 8PSK

P 067C 00 874392CE8C3020FF

DSC Asia Pacific

P 067C 01 211214410FD467FF

DSC Asia Pacific

30.05.2017 - Intelsat 19 @ 166.0E ECM

Intelsat 3940 H 27690-7/8

DVB-S QPSK

P 067C 00 16DE199DA44BD4FF

ESPN / TV 5 Monde

P 067C 01 ACF70F8EB19865FF

ESPN / TV 5 Monde

30.05.2017 - Intelsat 19 @ 166.0E ECM

Discovery Networks Asia-Pacific

3760 V 30000-3/4 DVB-S2 8PSK

P 067C 00 874392CE8C3020FF

DSC Philippines

P 067C 01 211214410FD467FF

DSC Philippines

and the constant.cw file i have the same as the Softcam.keys.

**Compo** · Oct 18th 2017

Dont see anything wrong with those.

You do know with stream relay it wont open the scanned in channel you need to add the stream source to your bouquet under IPTV settings ?

mcmuzzy · Oct 18th 2017

no i didn't know that how do you do that . Also how do i know if the keys are correct and if tjey are in the correct format because of this

2017/10/18 10:18:28 67F5BE72 r (emu) Key not found: P 0586 01
2017/10/18 10:18:28 67F5BE72 r (emu) ECM failed: Key not found

Also the constant.cw file could you please advise me if i still need that and if so what is the format for it please

I also wnet to my webif in openpli 6.0 and there is no option for the stream relay in the webif under customise

**Compo** · Oct 18th 2017

To test go to a powerVU channel via your webinterface 9 east as those keys have not changed in a while.

Select stream and download the m3U file, open this in notepad++ to show the details.

Now fire up Dreamboxedit and create a new bouquet lable it powervu then add the the channel to that bouquet under the IPTV protocol.

Now the above assumes you have some knowledge and this is a very long winded process so try if you get stuck ill chirp back in.

mcmuzzy · Oct 18th 2017

i cant test that satellite as i am in Australia and out of range also my cband dish is honed into Intelsat19 and its fixed (no motor)

This is why i need at least one current key set for intelsat 19

**Compo** · Oct 18th 2017

Im going to struggle to help you then mate.

Here are known working configs just make sure key location is correct and stream relay is enabled.

oscam.config

Quote

[global]

logfile = /var/log/oscam.log

unlockparental = 1

nice = -1

maxlogsize = 1024

preferlocalcards = 1

cwlogdir = /var/log/cw/

emmlogdir = /var/log/emm.log/

[streamrelay]

stream_ecm_delay = 800

stream_relay_enabled = 1

stream_emm_enabled = 1

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

delayer = 60

user = dvbapi

read_sdt = 1

extended_cw_api = 2

boxtype = dreambox

[webif]

httpport = 8888

httptpl = /usr/keys/oscam_atv_emu

httphelplang = en

httplocale = en

httprefresh = 10

httppollrefresh = 10

httpallowed = 192.168.0.0-255.255.255.255

Display More

oscam.server

Quote

[reader]

label = emulator

protocol = emu

device = emulator

caid = 090F,0500,0604,0E00,1010,2600,FFFF

detect = cd

ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0604:000000;0E00:000000;1010:000000;FFFF:000000;2600:000000;0100:000000

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;0500:023800;0500:D00040;0500:030B00

Display More

oscam.user

Quote

[account]

user = dvbapi

uniq = 3

keepalive = 1

au = 1

group = 1,2,3,4,5,6,7,

Display More

mcmuzzy · Oct 18th 2017

ok i have placed these configs in my oscam and replaced my old configs . the Softcam.keys file is in /etc/tuxbox/config/oscam/

i went to type the IP_of _your_box and go to settings >> customise >> and check the box Include ECM in http streams but the option is not there in openpli 6.0

i am also using

oscam-svn11391-openpli40-webif-emu (is that the correct one ?)

Would you recommend a different image or different oscam

**Compo** · Oct 18th 2017

Thats the latest version assuming it has the powervu patch applied this attached has.

Now you need to make the channel list. It does require the ECM in http streams setting. Not used that image but maybe it can be set via the images webinterface.

mcmuzzy · Oct 18th 2017

ok so should i go to openpli 4.0 or a different image all together. Which image is known to have the ECM in http streams setting option

mcmuzzy · Oct 18th 2017

i found openpli 4.0 and install andi first checked if it has the options for ECM in http streams setting and it does. I am putting in the rest of the configs now
i also noticed that this image has softcam and cs so if i wanted could i use oscam as cs and cccam or mgcamd to softcam as u would a normal server with nline in cccam.cfg or cws in newcamd.list ?

**Compo** · Oct 18th 2017

Oscam is the cam these days for CS and can handle nlines , it will also be needed for PowerVU and the Softcam.key file.

mcmuzzy · Oct 18th 2017

ok i have put everything in now and have have ticked the ECM in http streams setting option

i am still getting this

2016/06/09 08:09:08 1A16A32A c (ecm) dvbapi (0E00@000000/0000/001A/40:8DCBA7AB570F63924967F3133330C149): not found (2 ms) by emulator - ESPN
2016/06/09 08:09:09 1A16A32A c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2016/06/09 08:09:09 1A16A32A c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 178A ANY CHID PMTPID 13A2 VPID 0A64
2016/06/09 08:09:09 3D7F0832 r (emu) Key not found: P 001A 00
2016/06/09 08:09:09 3D7F0832 r (emu) ECM failed: Key not found

PowerVu Not Opening Dm800Se - Please Help

OSCam-EMU Support Forum

Participate now!

Share