Can someone help me to setup these 2 ?
What do i have to do for Dydns, what files needed and where ?
What do i have to for Openvpn, what files needed and whers ?
Thank you all !!!!
Can someone help me to setup these 2 ?
What do i have to do for Dydns, what files needed and where ?
What do i have to for Openvpn, what files needed and whers ?
Thank you all !!!!
Found it
user is root
pass is HDMU
Just installed the image works fine , can't ftp....need password and maybe username....
Anyone??? root / hdmu , root / HDMU , root / oscam root / root, all not working.
If i find a way to install Enigma image on my optibox , is it going to be easier to apply my settings ????
i will give it a rest now.....i am fighting with this for 7 hours now.....Master G thanks for your support....see you later.....
I am going crazy !!!!!!!!:caz2: i don't understand...as long as i had c lines everything was ok...How difficult can it be???...the account is active....i just want to transfer the settings to another Linux box......What else can it be.....why i don't have a continuous play.....
So there it is , i have added my CWS line to newcamd.list file , and thats my mg_cfg directly after installation of All Emu
#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 means CCcam or NewCamd client
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 15
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 300 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 16 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 11 alien
# 12 Fortis
B: { 12 }
Display More
Ok, i will reinstall the All emu plugin to my optibox and see what mg.cfg it gives me.........
This is what i have.........in mg.cfg.....
#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 Cccam,newcamd netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 15
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 300 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 16 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 11 alien
# 12 Fortis
B: { 12 }
# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
Display More
SH4 doesn't exist in mg.cfg...shall i add it and the give the number ?
I was able to transfer my CWS line to newcamd.list, that was easy to do, then it works but only for a minute , then it stops and starts again ..i don't know maybe after 1 hour.....so i don't have a continuous play on my channels.....
Yes, its a "friend" of mine who setup my box and changed my image to sifteam enigma 1.9.4 etc, etc....But because i have a new box i would like to transfer my settings from dm500s to my optibox.....
Hallo ,
is it possible to setup Oscam , or anyhting else, to work with CWS line and Openvpn settings....???
The thing is that they have setup my dm500s working with CWS line and mgcamd 1.35a and from what i see (by FTP) there are also settings for openvpn files....
the image installed in my box is sifteam 1.9.4...and i would like to transfer all my settings to my other box optibox anaconda plus.....(have oscam, xcamxlient, mgcamd etc...)
Any help please ???
Thank you
The other day i had this problem , that someone installed a new image on my box and changed the password, as a result i couldn't FTP the box or Telnet because original dreambox pass was changed....I also couldn't download Tuxbox Commander simply because url's weren't working from addons manager, after searching a lot in the internet i came out to this solution that WORKS !!!!!!!!!!!:feel_good:
You will need putty (or HyperTerminal) as well a null modem cable
- connect your dm with a serial/null cable to pc(laptop) with power off
- start putty and use serial option (change serial port speed in putty to 115200 and select your COM port) to connect to your dm and hit open
(don't forget that on putty FLOW CONTROL = NONE ) very important, i was fighting for 1 hour to realize this....
-If using Hyperterminal set com port properties to: Bits per Second=115200 ;Data bits=8 ;Parity=none ;Stop bits=1 ; Flow control =Xon/Xoff
- turn on dm and you will see a few messages during boot process
Dreambox DM500s
loaded at: 00500000 0060016C
avail ram: 00501000 02000000
- hit control x repeatedly until the boot
at the following prompt...
Linux/PPC load:
type (of course without quotes "")
"console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200 single"
and press enter
at this point I received the error [Can't open /proc/bus/dbox.sh] but just ignore it.
once you are at the bash level ( / #) type
"mount -t jffs2 /dev/mtdblock/1 /var"
and press enter
now type passwd
-----------------------you should see the following screen---------------
Changing password for root
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:
Re-enter new password:
passwd[19]: password for `root' changed by user `root'
Password changed.
Thats it.....joint10
Can anyone give me some info or instructions maybe ?
My dreambox has the account , running on mgcamd 1.35a ( i have CWS line at newcamd.list file ) and i want to share it with my optibox Anaconda plus..... Is it possible ???
Anyone knows if there is a plugin or how can i install it ??
Many Thanks
Thanks master G,
if i do a factory reset am i going to loose my emulator settings as well ??
SO,this guy installed on my dreambox 500s sifteam 1.9.4 enigma image and i can not access the box because username and password are changed.....i have tried root & dreambox, root & sifteam and many more but nothing......
Is there any way i can access my box , or change the user and pass ? or deactivate password ?
Many Thanks
anyone knows any good Linux editor - reader ??? I would like to go more "deep" into my receiver....
Thanks