Posts by solo1

# Configuration file for OpenSC
# Example configuration file




# NOTE: All key-value pairs must be terminated by a semicolon.




# Default values for any application
# These can be overridden by an application
# specific configuration block.
app default {
	# Amount of debug info to print
	#
	# A greater value means more debug info.
	# Default: 0
	#
	debug = 0;




	# The file to which debug output will be written
	#
	# Special values 'stdout' and 'stderr' are recognized.
	# Default: stderr
	#
	# debug_file = /tmp/opensc-debug.log;
	# debug_file = "C:\Documents and Settings\All Users\Documents\opensc-debug.log";




	# PKCS#15 initialization / personalization
	# profiles directory for pkcs15-init.
	# Default: /usr/share/opensc
	#
	# profile_dir = /usr/share/opensc;




	# CT-API module configuration.
	reader_driver ctapi {
		# module /usr/local/towitoko/lib/libtowitoko.so {
			# CT-API ports:
			# 0..3		COM1..4
			# 4		Printer
			# 5		Modem
			# 6..7		LPT1..2
			# ports = 0;
		# }
	}




	# The following section shows definitions for PC/SC readers.
	reader_driver pcsc {
		# Limit command and response sizes.
		# Default: n/a
		# max_send_size = 255;
		# max_recv_size = 256;
		#
		# Connect to reader in exclusive mode?
		# Default: false
		# connect_exclusive = true;
		#
		# What to do when disconnecting from a card (SCardDisconnect)
		# Valid values: leave, reset, unpower.
		# Default: reset
		# disconnect_action = unpower;
		#
		# What to do at the end of a transaction (SCardEndTransaction)
		# Valid values: leave, reset, unpower.
		# Default: leave
		# transaction_end_action = reset;
		#
		# What to do when reconnection to a card (SCardReconnect)
		# Valid values: leave, reset, unpower.
		# Note that this affects only the internal reconnect (after a SCARD_W_RESET_CARD).
		# A forced reset via sc_reset() always does a full powerup.
		# Default: leave
		# reconnect_action = reset;
		#
		# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
		# Default: true
		# enable_pinpad = false;
		#
		# Use specific pcsc provider.
		# Default: libpcsclite.so.1
		# provider_library = libpcsclite.so.1
	}




	# Options for OpenCT support
	reader_driver openct {
		# Virtual readers to allocate.
		# Default: 2
		# readers = 5;
		#
		# Limit command and response sizes.
		# Default: n/a
		# max_send_size = 255;
		# max_recv_size = 256;
	};




	# What card drivers to load at start-up
	#
	# A special value of 'internal' will load all
	# statically linked drivers. If an unknown (ie. not
	# internal) driver is supplied, a separate configuration
	# configuration block has to be written for the driver.
	# Default: internal
	# NOTE: When "internal" keyword is used, must be last entry
	#
	# card_drivers = customcos, internal;




	# Card driver configuration blocks.




	# For card drivers loaded from an external shared library/DLL,
	# you need to specify the path name of the module
	#
	# card_driver customcos {
		# The location of the driver library
		# module = /usr/lib/opensc/drivers/card_customcos.so;
	# }




	# Force using specific card driver
	#
	# If this option is present, OpenSC will use the supplied
	# driver with all inserted cards.
	#
	# Default: autodetect
	#
	# force_card_driver = customcos;




	# In addition to the built-in list of known cards in the
	# card driver, you can configure a new card for the driver
	# using the card_atr block. The goal is to centralize
	# everything related to a certain card to card_atr.
	#
	# The supported internal card driver names can be retrieved
	# from the output of:
	# $ opensc-tool --list-drivers




	# Generic format: card_atr <hex encoded ATR (case-sensitive!)>




	# New card entry for the flex card driver
	# card_atr 3b:f0:0d:ca:fe {
		# All parameters for the context are
		# optional unless specified otherwise.




		# Context: global, card driver
		#
		# ATR mask value
		#
		# The mask is logically AND'd with an
		# card ATR prior to comparison with the
		# ATR reference value above. Using mask
		# allows identifying and configuring
		# multiple ATRs as the same card model.
		# atrmask = "ff:ff:ff:ff:ff";




		# Context: card driver
		#
		# Specify used card driver (REQUIRED).
		#
		# When enabled, overrides all possible
		# settings from the card drivers built-in
		# card configuration list.
		# driver = "flex";




		# Set card name for card drivers that allows it.
		# name = "My CryptoFlex card";




		# Card type as an integer value.
		#
		# Depending on card driver, this allows
		# tuning the behaviour of the card driver
		# for your card.
		# type = "2002";




		# Card flags as an hex value.
		# Multiple values are OR'd together.
		#
		# Depending on card driver, this allows
		# fine-tuning the capabilities in
		# the card driver for your card.
		#
		# Optionally, some known parameters
		# can be specified as strings:
		#
		# rng - On-board random number source
		#
		# flags = "rng", "0x80000000";




		#
		# Context: PKCS#15 emulation layer
		#
		# When using PKCS#15 emulation, force
		# the emulation driver for specific cards.
		#
		# Required for external drivers, but can
		# be used with built-in drivers, too.
		# pkcs15emu = "custom";




		#
		# Context: reader driver
		#
		# Force protocol selection for specific cards.
		# Known parameters: t0, t1, raw
		# force_protocol = "t0";
	# }




	# PIV cards need an entry similar to this one:
	# card_atr 3B:7D:96:00:00:80:31:80:65:B0:83:11:00:AC:83:00:90:00 {
		# name = "PIV-II";
	 	# driver = "piv";
	# }




	# Estonian ID card and Micardo driver sometimes only play together with T=0
	# In theory only the 'cold' ATR should be specified, as T=0 will
	# be the preferred protocol once you boot it up with T=0, but be
	# paranoid.
	# 
	# Warm ATR v1
	card_atr 3b:6e:00:ff:45:73:74:45:49:44:20:76:65:72:20:31:2e:30 {
		force_protocol = t0;
	}
	# Cold ATR v1
	card_atr 3b:fe:94:00:ff:80:b1:fa:45:1f:03:45:73:74:45:49:44:20:76:65:72:20:31:2e:30:43 {
		force_protocol = t0;
	}
	# Warm ATR v2
	card_atr 3b:5e:11:ff:45:73:74:45:49:44:20:76:65:72:20:31:2e:30 {
		force_protocol = t0;
	}
	# Cold ATR v2
	card_atr 3b:de:18:ff:c0:80:b1:fe:45:1f:03:45:73:74:45:49:44:20:76:65:72:20:31:2e:30:2b {
		force_protocol = t0;
	}
	# Digi-ID cold ATR. The same card has the same warm ATR as "Cold ATR v1" above
	# The card is claimed to only support T=0 but in fact (sometimes) works with T=1, even if not advertised in ATR.
	card_atr 3b:6e:00:00:45:73:74:45:49:44:20:76:65:72:20:31:2e:30 {
		force_protocol = t0;
	}
	# Cold ATR v3 dev1
	card_atr 3b:fe:18:00:00:80:31:fe:45:45:73:74:45:49:44:20:76:65:72:20:31:2e:30:a8 {
		force_protocol = t0;
	}
	# Warm ATR v3 dev1
	card_atr 3b:fe:18:00:00:80:31:fe:45:80:31:80:66:40:90:a4:56:1b:16:83:01:90:00:86 {
		force_protocol = t0;
	}
	# Warm ATR v3 dev2
	card_atr 3b:fe:18:00:00:80:31:fe:45:80:31:80:66:40:90:a4:16:2a:00:83:01:90:00:e1 {
		force_protocol = t0;
	}
	# Warm ATR v3 (18.01.2011)
	card_atr 3b:fe:18:00:00:80:31:fe:45:80:31:80:66:40:90:a4:16:2a:00:83:0f:90:00:ef {
		force_protocol = t0;
	}




	# D-Trust cards are also based on micardo and need T=0 for some reason
	card_atr 3b:ff:94:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:23 {
		force_protocol = t0;
	}
	card_atr 3b:ff:11:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:a6 {
		force_protocol = t0;
	}

	# IAS/ECC cards
	#card_atr 3B:7F:96:00:00:00:31:B9:64:40:70:14:10:73:94:01:80:82:90:00 {
        #        type = 25001;
        #        driver = "iasecc";
        #        name = "Gemalto MultiApp IAS/ECC v1.0.1";
        #        # secure_messaging = local_gemalto_iam;
        #        # secure_messaging = local_adele;
        #}
        #card_atr 3B:DD:18:00:81:31:FE:45:80:F9:A0:00:00:00:77:01:08:00:07:90:00:FE {
        #        type = 25002;
        #        driver = "iasecc";
        #        name = "Oberthur IAS/ECC v1.0.1";
        #        # No 'admin' application for this card -- no secure messaging
        #}
        #card_atr 3B:7F:18:00:00:00:31:B8:64:50:23:EC:C1:73:94:01:80:82:90:00 {
        #        type = 25003;
        #        driver = "iasecc";
        #        name = "Morpho YpsID S3 IAS/ECC";
        #        # secure_messaging = local_morpho_YpsID_S3;
        #}




	# Below are the framework specific configuration blocks.




	# PKCS #15
	framework pkcs15 {
		# Whether to use the cache files in the user's
		# home directory.
		#
		# At the moment you have to 'teach' the card
		# to the system by running command: pkcs15-tool -L
		#
		# WARNING: Caching shouldn't be used in setuid root
		# applications.
		# Default: false
		# use_file_caching = true;
		#
		# Use PIN caching?
		# Default: true
		# use_pin_caching = false;
		#
		# How many times to use a PIN from cache before re-authenticating it?
		# Default: 10
		# pin_cache_counter = 3;
		#
		# Enable pkcs15 emulation.
		# Default: yes
		# enable_pkcs15_emulation = no;
		#
		# Prefer pkcs15 emulation code before
		# the normal pkcs15 processing.
		# Some cards (like esteid and pteid) work in emu-only mode,
		# and do not depend on this option.
		#
		# Default: no
		# try_emulation_first = yes;

		# Enable builtin emulators.
		# Default: yes
		# enable_builtin_emulation = no;
		#
		# List of the builtin pkcs15 emulators to test
		# Default: esteid, openpgp, tcos, starcert, itacns, infocamere, postecert, actalis, atrust-acos, gemsafeGPK, gemsafeV1, tccardos, PIV-II;
		# builtin_emulators = openpgp;




		# additional settings per driver
		#
		# For pkcs15 emulators loaded from an external shared
		# library/DLL, you need to specify the path name of the module
		# and customize the card_atr example above correctly.
		#
		# emulate custom {
			# The location of the driver library
			# module = /usr/lib/opensc/drivers/p15emu_custom.so;
		# }
	}
}




# Parameters for the OpenSC PKCS11 module
app opensc-pkcs11 {
	pkcs11 {
		# Should the module support hotplug of readers as per PKCS#11 v2.20?
		# This affects slot changes and PC/SC PnP, as v2.11 applications
		# are not allowed to change the length of the slot list.
		# Default: true
		# plug_and_play = false;




		# Maximum Number of virtual slots.
		# If there are more slots than defined here,
		# the remaining slots will be hidden from PKCS#11.
		# Default: 16
		# max_virtual_slots = 32;




		# Maximum number of slots per smart card.
		# If the card has fewer keys than defined here,
		# the remaining number of slots will be empty.
		# Default: 4
		# slots_per_card = 2;




		# (max_virtual_slots/slots_per_card) limits the number of readers
		# that can be used on the system. Default is then 16/4=4 readers.




		# Normally, the pkcs11 module will create
		# the full number of slots defined above by
		# num_slots. If there are fewer pins/keys on
		# the card, the remaining keys will be empty
		# (and you will be able to create new objects
		# within them).
		# Default: true
		# hide_empty_tokens = false;




		# By default, the OpenSC PKCS#11 module will not lock your card
		# once you authenticate to the card via C_Login.
		#
		# Thus the other users or other applications is not prevented
		# from connecting to the card and perform crypto operations
		# (which may be possible because you have already authenticated
		# with the card). This setting is not very secure.
		#
		# Also, if your card is not locked, you can enconter problems 
		# due to limitation of the OpenSC framework, that still is not 
		# thoroughly tested in the multi threads environment.
		#
		# Your settings will be more secure if you choose to lock your 
		# card. Nevertheless this behavior is a known violation of PKCS#11 
		# specification. Now once one application has started using your 
		# card with C_Login, no other application can use it, until 
		# the first is done and calls C_Logout or C_Finalize. In the case 
		# of many PKCS#11 application this does not happen until you exit 
		# the application.
		# Thus it is impossible to use several smart card aware applications 
		# at the same time, e.g. you cannot run both Firefox and Thunderbird at 
		# the same time, if both are configured to use your smart card.
		#
		# Default: false
		# lock_login = true;




		# User PIN unblock style
		#    none:  PIN unblock is not possible with PKCS#11 API;
		#    set_pin_in_unlogged_session:  C_SetPIN() in unlogged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    set_pin_in_specific_context:  C_SetPIN() in the CKU_SPECIFIC_CONTEXT logged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    init_pin_in_so_session:  C_InitPIN() in CKU_SO logged session:
		#       User PIN 'UNBLOCK' is protected by SOPIN. (PUK == SOPIN).
		#       # Actually this style works only for the PKCS15 contents without SOPIN.
		#       # For those with SOPIN, this mode will be usefull for the cards without
		#       #   modes 00 and 01 of ISO command 'RESET RETRY COUNTER'. --vt
		#
		# Default: none
		# user_pin_unblock_style = set_pin_in_unlogged_session;




		# Create slot for unblocking PIN with PUK
		# This way PKCS#11 API can be used to login with PUK and
		# change a PIN.
		# Warning: causes problems with some applications like
		# firefox and thunderbird. Thus turned off by default
		#
		# Default: false
		# create_puk_slot = true;




		# Report as 'zero' the CKA_ID attribute of CA certificate
		# For the unknown reason the middleware of the manufacturer of gemalto (axalto, gemplus) 
		# card reports as '0' the CKA_ID of CA cartificates. 
		# Maybe someone else will need it. (Would be nice to know who and what for -- VTA)
		#
		# Default: false
		# zero_ckaid_for_ca_certs = true;




		# List of readers to ignore
		# If any of the strings listed below is matched (case sensitive) in a reader name,
		# the reader is ignored by the PKCS#11 module.
		#
		# Default: empty
		# ignored_readers = "CardMan 1021", "SPR 532";
	}
}




# Used by OpenSC.tokend on Mac OS X only.
app tokend {
	# The file to which debug log will be written
	# Default: /tmp/opensc-tokend.log
	#
	# debug_file = /Library/Logs/OpenSC.tokend.log




	framework tokend {
		# Score for OpenSC.tokend
		# The tokend with the highest score shall be used.
		# Default: 300
		#
		# score = 10;
	}
}




# XXX: remove cardmod pseudodriver
app cardmod {
	# cardmod app name use special pcsc reader subset 
	# fix options for this reader driver here. 




	reader_driver cardmod {
		# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
		# Default: true
		# enable_pinpad = false;
	}
}