Posts by just4fun

Hi, i can´t have this cam to clear channels with SoftCam key or with my C line:doubt:
With PLi img 3.0 emu work fine but not with C line.
Any help? thanks

server

Quote

[reader]
label = myemulator
protocol = constcw
device = /var/keys/SoftCam.Key
ident = 0D05:000004,000010;0500:030B00;0622:000000;0603:000000;0100:000030,000084,000085,00009B
group = 1
audisabled = 1

[reader]
label = server1
protocol = cccam
device = dyndns.tv,12000
account = dddd,aaaa
group = 1,2
fallback = 1
cccmaxhop = 3
caid = 0500
cccversion = 2.0.11
cccbuild = 2892

Display More

dvbapi

Quote

P: 0500:030B00:6F73 # TNTSAT - cherie 25
P: 0500:030B00:6F86 # TNTSAT - cherie 25
P: 0500:030B00:6F87 # TNTSAT - cherie 25
P: 0500:030B00:2202 # TNTSAT - l'equipe tv
P: 0500:030B00:2216 # TNTSAT - l'equipe tv
P: 0500:030B00:2136 # TNTSAT - numero 23
P: 0500:030B00:217C # TNTSAT - numero 23
P: 0500:030B00:25EA
P: 0500:030B00 # TNTSAT

Display More

Hello, this is again a mistake, the file is for the bigger ukrainian (40 mb memory) ..; never you can put a firmware biggest than 4mb in the S9 & another thing: the chip seems to be a sh4, the same like a ipbox or atevio:59:

Hello, you cannot connect with dcc, you can only use STBHD_LAN_MM ..check your IP & pass(if you have one);-)

Hello, what do mean with "router" connection? for local network/sharing you must have 2 receivers minimum: the server & your box.
very simple if trusted server(home or friend)

server box :

in cccam cfg
F: user1 user1 # with this line you share all from the box

Client box:
in cccamcfg:
C: 192.168.1.3 12000 user1 user1 >> server_box_ip port name pass

Simple again if you need a extra box :
put the same cccam cfg in the 3nrd box

:69:

Yes the firmware is installed, if not , you can´t start the box:32_002:
You can check it on >> menu, info

Hi, at first you must enter your latitude, longitude if you have a motor
>> menu, installation, installation antenne... set usals to all sat, exit
then to the scan:
>> menu, installation, satellite list, choose your sat with OK button, exit, single satellite scan, choose your sat...that´s all :10_002:

Hi, i think there´s a mistake.....these things are for the Russian Openbox s 5..8, the file is 17,5 MB..our firmware is 4,1 MB & no access to the web, closed linux:32_002: we need a good enginer to brake the soft :-))

HD channels working ok on s9, if you have a viasat card: no HD in cs or if you talk about french c+ HD..there is a pb since few weeks with all receivers, only c+ box is 100% ok.

You should put Cline in cccam cfg...or softcam key for few provider example : irdeto

Hello, any ide??
thanks

Hi, make the full backup with USB pen..go to menu & follow instructions... The tool to connect the S9 is the Erom_upgrade but i think it is only to send the firmware & bootloader .

Sorry i was in Schweiz... it is very simple.... with your receiver connected on internet & your PC:
download the program STBHD_LAN_MM
download the TP_PROG dbs file & copy it in the same directory than the "STBHD_LAN_MM"
connect to receiver with STBHD_LAN_MM
choose the TP_prog file in the left window
send it & reboot
I cann´t explain beder than this

Ok, try this little list, only few favorites it is mine & working ....

http://www.megaupload.com/?d=21LELNYF

** remember, you can also send the TP_PROG dbs file with the FTP **STBHD_LAN_MM** copy the file into the STBHD directory, connect & send it..reboot after.

Quote from zappa07

, "noch" on front of the box. Does anyone know where im going wrong please, cheers

this happened to me few times & i don´t know why but i tryed like this : i made a scan of my sat, make a full Firmware dump,
edited the channels from the dump & save, after update from USB & make a new dump TP_PROG...so you have the channels
ready to next upgrade....

Quote from shatanar

Anyone have
SetEditHD100 1.14 registered version
or
SetEditHD100 1.7 registered version

Plz add ur link or upload it to the forum.

**thanks for the Dream dll, i´ve forgot :(

Her the registred 1.14 uploaded for you

http://www.megaupload.com/?d=K1078KOH

No 1.17 at the moment..

Hi..off course it WORK...you must INSTALL the 2 Setedit, the 100HD registred & the not registred for Dream..when you can choose in file,new,dream & a new window appear so you can open the dream settings you want to copy..
233b5afd66051.jpg 11a815327b6d0a3350.jpg:69:

In menu>information you can see the date of your SW..i think the last is end of juni (06-11)

Hi, this is not from myself...

1-download setedit 100HD & install
2-download the dreambox setedit (not registrered) plugin from setedit de & install
5-download hannibal or other settings for dreambox
6-open an SW abs file for s9-s10
7-on menu, new file, choose dream & a new window appear
8-open the dreambox settings, choose your channels-favorite
9-paste into abs file settings, when finish, save & send the new SW abs file with USB
Now all channels is there:78:
** don´t try to change the favorite name with setedit won´t work, rename it
with the remote
10-make a dump TP_PRG so you have only the channels & can send it in new img with STBH_lan or with USB
:21_002:

Hi, i will try to help
1- if you have the S10, upgrade it with the SW TEST S9-S10, so you have the restricted FTP& SERVER control
2- with STBH_lan proggy, you can upload the channels, cfg or softcam
3- rebooting is ever a good thing
4- if you want/need, i can upload a working s9-s10 test backup from my S9

Yes, i´ve noticed that only IRD & Crypo is readed & 14 lines on the last SW & only 9 on 04_04_11 SW :45:
another thing, with last 30_06_11 .. the CA is ignored after booting, :76: tryed with fun seca RAI4 (working with 04_04_11 or VuDuo).

**EDIT...i´ve tryed right now with Sw s9/s10 test....it is more than 14 in softcam, it is 39-40 but only I & W no S, V ....