Posts by Jeffzapp

My boxkey has been working fine in my other CCcam server for over 2 years. Is it possible it could have changed?

Regards

Also I can not connect to web info page now.

Regards

Hi master G

Still dark on Pick TV, Sport and Movies.

When I click on Become a VIP it sends me to a smilly page. Can You help please?

Regards

I dont know how to run lsusb I have done what I think it is but dont understand. Could you help please?

root@*********-desktop:~# lsusb
Bus 003 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Regards

Could You check Your PM's please.

Regards

As follows. I am using a Smargo Smartreader +

Oscam.Conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.18-192.168.0.254
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000

Oscam Server

[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
# 0963 is *** UK.
boxid =
# Oscam can read a *** card i.d, but you can also put this
# in manually
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.

Oscam User

account]
user = test1
description = for local mgcamd or DVBAPI
pwd = test2
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

Regards

Hi All

Do I have to give Usr/Local/etc 755 permisions?

Regards

Hi

I have run auto install. All is working however server wont see all the channels. I.E. Pick TV, Sports or movie channels. Web interface is reporting

2011/07/12 17:05:36 B779DB70 r recompile with internal reader support.
2011/07/12 17:05:36 B779DB70 r Cannot open device: /dev/ttyUSB0
2011/07/12 17:06:36 B779DB70 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/07/12 17:06:36 B779DB70 r recompile with internal reader support.
2011/07/12 17:06:36 B779DB70 r Cannot open device: /dev/ttyUSB0
2011/07/12 17:07:36 B779DB70 r ERROR, you have specified 'protocol = internal' in oscam.server,

I am reading this could be down to box key. I have boxkey with no spaces.

Regards

I will do reinstall on spare machine and let u know. Is this the thread for the correct install file? http://linuxsat-support.com/li…-installation-ubuntu.html

Thank You for helping me thus far.

Regards

Is there an up to date Ubuntu/CCcam/Oscam S**/Smargo auto install file availeable. I have tried the one on this forum but had problems getting it to see the whole card. I.E.pick tv,Sports and Movie channels.

Regards

Sorry master G that is the one I have used. I have just downloaded Nabilosat Oscam+CCcam2.1.3 DM500 Backup.rar to try next.

Regards

Hi master G. I used this SY UK ready Nabilosat Oscam+CCcam2.1.3 DM500 Backup.rar

Regards

This is my Config.

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

#[webif]
#httpport = 8888
#httpuser = admin
#httppwd = admin
#httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
## protocols

[webif]
httpport = 8080
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000

Done as requested. Still no web info. Every thing else ok.

Oscam. It must be my Oscam config set up. Ive got it set up as
127.0.0.1,192.168.0.9-192.168.0.254 Port 10000 open to my box ip
but no joy.

Thanks Ten Below. I sorted it now I was treeting it like a Tring Card running through newcs and obviously totaly different. Just cant get web info working for sone reason.

Regards

Hi Everyone

Very new to Oscam so please have patience.

I need to connect my DM500 to my Ubuntu server. The 500 is working fine, I have inserted the N line in server etc but it will not connect as a client. Do I need a file like newcs to conect the 500 to server so as I can reshare to clients? I have tried to fined info on forum and had no luck. Please Help.

Regards