Have I asked a silly question? The reason I ask is I was wondering if updating Ubuntu would effect any of the files in Oscamm/Cccam rendering it inoperative.
Regards
Have I asked a silly question? The reason I ask is I was wondering if updating Ubuntu would effect any of the files in Oscamm/Cccam rendering it inoperative.
Regards
Thanks Master G.
I will stick to the full auto install I think.
Regards
Hi master G
Will this install Oscam on ubuntu along side cccam?
Regards
Hi Guys
Just a bit of advise please. When Ubuntu wants to update it's self is it ok to let it update?
Regards
Hi master G. Is there an idiots guide on how to do the above?
Regards
Thanks master G. How about the auto updating side of things? Are the con-figs for the cards OK? I will obviously search this forum now to see if there is any other tweaks to enhance the running and performance. Thanks for your help.
Kind regards
Hi MaryQ
I run a Dr**mbox in my caravan. I use a 3g wireles dongle attached to one of these TP Link TL-MR3420 300MBPS WIRELESS N 3G ROUTER. I got it off fleabay for £34. They are very easy to set up and a Dr**mbox uses very little data so cheap to run.
Regards
Hi master G.
Finaly master G it' working. I took 1 of the cards off j*c then I altered the Oscam,server and user.conf files as bellow. removed open ports. I rebooted checked smartreaders with the lsusb command. It sat there for about 3-4 mins then it burst into life. Could you please advise if I need any other lines in the configs to protect things I.E a log file line? Also will both the cards auto update with these configs or just the Tr**ng card?
Oscam.conf
global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;34001@0BAA:000000
#port = 10000@0963:000000;34000@0603:000000;34001@0BAA:000000
Oscam.server
[reader]
label = s*yuk
protocol = smartreader
detect = mouse
device = 003:003
emmcache = 1,3,2
caid = 0963
boxid = ********
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
[reader]
label = Tr**g
Protocol = smartreader
detect = mouse
device = 002:002
Group = 2
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000
Oscam.user
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1
au = s*yuk
caid = 0963
[account]
user = test3
pwd = test4
group = 2
au = Tr**g
Display More
Regards
Very sorry. There is no log file master G. I take it the line logfile = /usr/local/etc/oscam.log go's into the Oscam.conf file? I just copied and pasted the one you altered for me.
Regards
Sorry master G. I didn't know there was any passwords anyone could use.
Regards
Hi master G
I understand about the oscam.conf fig file now. However I still cant get all cards running together. I can get them to run 1 at a time with no problems. Could you cast an eye over these new configs I have done and see if there is any problems please. I have opened all the necessary ports.
Oscam.conf
global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;34000@0603:000000;34001@0BAA:000000
Oscam.server
[reader]
label = s*yuk
protocol = smartreader
detect = mouse
device = 003:002
emmcache = 1,3,2
caid = 0963
boxid = ********
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
--------------------------------------------------------------------------------------------------
Tr**g
[reader]
label = Tring
Protocol = smartreader
detect = mouse
device = 002:002
Group = 2
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000
-------------------------------------------------------------------------------------------------
J*C Sports
[reader]
label = J*C
Protocol = smartreader
detect = mouse
device = 002:003
force_irdeto = 1
Group = 3
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
caid = 0603
ident = 0603:000000
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000
------------------------------------------------------------------------------------------------
Oscam.user
S*y UK
[account]
user = ****
pwd = ****
monlevel = 0
uniq = 0
group = 1
au = s*yuk
caid = 0963
-------------------------------------------------------------------------
Tr**g
[account]
user = ***
pwd = ****
group = 2
au = Tr**g
------------------------------------------------------------------------
J*C Sports
[account]
user = ****
pwd = ***
group = 3
AU = J*C
----------------------------------------------------------------------------
Cfg File
SERVER LISTEN PORT : 35358
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
#WEBINFO USERNAME :root
#WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/ttyUSB0 ** ** ** **
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
#
N: 127.0.0.1 10000 *** **** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
N: 127.0.0.1 34001 *** **** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
N: 127.0.0.1 34000 *** *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
#
#
#
#
F: user password 2 1 1 { 0:0:1 }
#
Kind Regards
Hi Ten Below.
Yes I did. Think I am trying to hard m8. Getting on top of me. I will walk away and resume tomorrow.
Regards
Hi Ten Below.
I understand where all the files go. I am trying to add cards. I can make them run on there own but when I try to run them all together I can only get 1 to connect. When I look on web info only 1 N line is connecting so it's only seeing 1 card. It's very frustraiting as all the pre set Oscam configs are for D/boxs I assume and not Ubuntu. So configs have to be changed I.E protocol, detect, devise to name a few. I will keep pluging away anyway.
Regards
Hi newtolinux
So I add the to my Oscam.conf file? The one I have my card configs in?
Regards
you need it for oscam to run buddy
new2
Hi M8
So it's not for any particular card then?
Regards
Hi master G
What will this Oscam.conf file do?
Regards
Look here for an example of how to configure more than one card.
Help setting up Al Jazeera Sports viaccess + HRT viaccess Oscam
Hi. Could you look at my configs please and see if you can find any problems?
Regards
Oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000
----------------------------------------------------------------------------
JSC Sports
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0603:000000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
-------------------------------------------------------------------------------
Tring
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log
[newcamd]
Key = 0102030405060708091011121314
Port = 34001@0BAA:000000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
-----------------------------------------------------------------------------------------------------------------------------------------
Oscam.server
[reader]
label = s*yuk
protocol = smartreader
detect = mouse
device = 002:003
emmcache = 1,3,2
caid = 0963
services = Variety Pack,Knowledge Pack,Style & Culture Pack,News & Event Pack,Children's Pack,Music Pack,Movies Pack,Sports Pack,FreeSAT
boxid = ********
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
----------------------------------------------------------------------------
JSC Sports
[reader]
label = JSC
Protocol = smartreader
detect = mouse
device = 003:002
force_irdeto = 1
Group = 1
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
caid = 0603
ident = 0603:000000
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000
-----------------------------------------------------------------------------------
Tring
[reader]
label = Tring
Protocol = smartreader
detect = mouse
device = 002:002
Group = 1
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000
Oscam.user
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = s*yuk
caid = 0963
-------------------------------------------------------------------------
JSC Sports
[account]
user = test3
pwd = test4
group = 1
AU = JSC
----------------------------------------------------------------------------
Tring
[account]
user = test5
pwd = test6
group = 1
au = Tring
--------------------------------------------------------------------------------------------
CCcam.cfg
SERVER LISTEN PORT : 35358
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
#WEBINFO USERNAME :root
#WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/ttyUSB0 ** ** ** **
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
#
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
N: 127.0.0.1 34000 test3 test4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
N: 127.0.0.1 34001 test5 test6 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
#
#
#
F: user password 2 1 1 { 0:0:1 }
#
#
Hi Guys
Is there a section on how to add different cards to an ubuntu/oscam server. I have added S*y UK no problem. I want to add Tri*g and J*C Sports. I have downloaded the configs for them but I think they all want edditing I.E. N lines, server files, usb ports etc. Thanks in advance for any help.
Rehards
Hi.
create a bouquet with dbox edit? Bit lost on how to get the bouquet in a folder.
Regards
Hi.
What I have noticed is if I use this file in my conf ESPN will not clear. So I will have to wait until Ten Below can manage to get time to add ESPN to his very handy sid assign feature.
Regards