Posts by Jeffzapp

  • S**UK Blocker/Card Speed

    Hi


    Could you tell me if this conf is blocking my card please? Also is cardmhz = 357 the correct speed to run the card?






    Regards


    Hi


    I have found this config on this forum. Is this the correct way to block the card?




    Regards.

  • Automated Install CCcam/Oscam

    Hi Everyone


    Finally I have completed building a CCam/Oscam/S**UK ready/Ubuntu server. Here are my config files for S**UK and my .cfg file. They work 100%. I would like to thank those who helped me on this forum and I look forward to trying to help and pass on any information I have learned.






    Kind Regards

  • Stop/Start Manualy. Default web page

    I put the both in /tmp then ran the CCcamOscamInstall.sh. I assume they are in the correct directories as they are not in /tmp any longer. Everthing is now working. Except for the the default web page for this server. It says. The web server software is running but no content has been added, yet. How do I add content so as I can see connected clients,servers etc.


    Regards

  • Stop/Start Manualy. Default web page

    Hi master G


    Got it now. If I use the command sudo killall -9 oscam. That stops server. If I use the command sudo oscam -b that starts it and so on. Thank you. Could you give me any help or direction to get the default web page for this server working. It says
    It works!
    This is the default web page for this server.
    The web server software is running but no content has been added, yet.


    Kind regards

  • Stop/Start Manualy. Default web page

    Hi master G


    what do I do when I have ran the command? It just opens the terminal.


    sudo pico /usr/local/etc/oscam.user


    sudo pico /usr/local/etc/oscam.conf


    sudo killall -9 oscam


    sudo shutdown -h now


    sudo reboot


    lsusb[reader]
    label = ***uk
    protocol = smartreader
    detect = mouse
    device = 002:002
    emmcache = 1,3,2
    caid = 0963
    boxid = ********


    Regards

  • Stop/Start Manualy. Default web page

    Hi Everyone


    I have (after many hours of toil!!!) managed to get a CCcam/Oscam/Smargo server up and running with S** UK using the auto install file off this forum. The only thing I dont like about it is I am unable to stop/start it at will. Is there a script to enable me to stop/start? Also I need some help to get the default web page up so as I can see servers,clients etc. Any help would be greatly appreciated.


    Regards

  • Automated Install CCcam/Oscam

    Hi.
    Finaly 38 hours later I have sorted it. Boxkey needed to be in lower case. Here are my configs for anyone interested.


    Oscam.conf


    global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1
    disablelog = 1



    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    #httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
    # protocols


    [newcamd]
    key = 0102030405060708091011121314
    port = 10000@0963:000000;10001@0963:000000


    Oscam.server


    [reader]
    label = ***uk
    protocol = smartreader
    detect = mouse
    device = 002:002
    emmcache = 1,3,2
    caid = 0963
    boxid = ********
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    mhz = 357
    cardmhz = 357
    ident = 0963:000000
    group = 1


    Oscam.user


    [account]
    user = test1
    pwd = test2
    monlevel = 0
    uniq = 0
    group = 1,2
    au = ***uk
    caid = 0963


    Regards

  • Automated Install CCcam/Oscam

    Hi Ten Below


    I took the /dev/ttyUSB0 smartreader+ out and also changed device to = 0403:6001 and protocol to = mouse. Web info is working now as I only opened port 10000 forgot to open port 888 (been trying for days to get this dam thing configed Tired!!!) Still no pick tv, sport or movies. When I hash out the /dev/ttyUSB0 smartreader and then run 127.0.0.1 so I can see if it has picked the card up there is obviosly no devise there to see in entitlements. Does this line go in 1 of the Oscam config files?


    Regards

  • Automated Install CCcam/Oscam

    Hi. I got the web interface up. Here is the log file.


    2011/07/13 0:30:01 B78226C0 s newcamd: initialized (fd=7, port=10001, crypted)
    2011/07/13 0:30:01 B78226C0 s CAID: 0963
    2011/07/13 0:30:01 B78226C0 s provid #0: 000000
    2011/07/13 0:30:01 B78226C0 s radegast: disabled
    2011/07/13 0:30:01 B78226C0 s http thread started
    2011/07/13 0:30:01 B78226C0 s creating thread for device 002:002
    2011/07/13 0:30:01 B78226C0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2011/07/13 0:30:01 B78226C0 s waiting for local card init
    2011/07/13 0:30:01 B7809B70 r reader thread started (thread=B7809B70, label=foxtel, device=002:002, detect=cd, mhz=357, cardmhz=357)
    2011/07/13 0:30:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:30:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:30:01 B7815B70 h HTTP Server listening on port 8888
    2011/07/13 0:31:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:31:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:32:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:32:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:33:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:33:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:34:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:34:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:35:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:35:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:36:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:36:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:37:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:37:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:38:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:38:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:39:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:39:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:40:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:40:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:41:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:41:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:42:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:42:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:43:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:43:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:44:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:44:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:45:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:45:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:46:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:46:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:47:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:47:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:48:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:48:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:49:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:49:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:50:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:50:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:51:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:51:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:52:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:52:01 B7809B70 r Cannot open device: 002:002
    2011/07/13 0:53:01 B7809B70 r ERROR opening device 002:002
    2011/07/13 0:53:01 B7809B70 r Cannot open device: 002:002


    Regards

  • Automated Install CCcam/Oscam

    Oscam.conf


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
    # protocols


    [newcamd]
    key = 0102030405060708091011121314
    port = 10000@0963:000000;10001@0963:000000


    Oscam Server


    [reader]
    label = Foxtel
    enable = 1
    protocol = SmartReader+
    device = 002:002
    caid = 0963:000000
    # 0963 is *** UK.
    boxid = ********
    # Oscam can read a *** card i.d, but you can also put this
    # in manually
    detect = cd
    cardmhz = 357
    # this helps the card run more smootly
    group = 1
    # Oscam has the concept of groups. Only users in group 1 can
    # use this reader. I'm only using one group.
    emmcache = 1,3,2
    ecmcache = 1
    blockemm-unknown = 1
    blockemm-g = 1
    # these ensure smooth decrypting
    lb_weight = 101
    # for load balancing - can be commented out.


    Oscam Server


    [account]
    user = test1
    description = for local mgcamd or DVBAPI
    pwd = test2
    disabled = 0
    uniq = 1
    group = 1
    au = lower card
    caid = 0963:000000


    CCcam.cfg


    SERVER LISTEN PORT : *****
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    #WEBINFO USERNAME :root
    #WEBINFO PASSWORD :dreambox
    TELNETINFO USERNAME :root
    TELNETINFO PASSWORD :dreambox
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    #MINIMUM DOWNHOPS: 1
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY:
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256



    SERIAL READER : /dev/ttyUSB0 smartreader+



    #
    F: ******* ********** 2 1 1 { 0:0:1 }
    #