File now attached
Posts by codar
-
-
It's in menu-info-network on vix image.
Probably somewhere similar in network info on bh
-
Flashing guide is here:
Images are here: (Probably need to determine if your dm900 is a clone or original and choose image accordingly)
I think your dm900 is arm processor so cccam won't work, you could use some emulators from post #2 here:
-
This dish would also do for the pole i linked to already:
https://www.ebay.ie/itm/Freesa…34c355:g:nckAAOSwlY1ZHY6-
Quote
would be easier to just use the same one.....It probably would but it needs to be bolted to the wall. From the look of it, it could be a zone 1 mk4 dish.
You could doctor it to fit on a vertical pole, I'm sure it can be done but a replacement is relatively cheap so it's probably not worth the bother to be honest.
-
-
this may do but you'll probably need a different type of dish as the one in the pic hasn't got a bracket for mounting it on a pole
-
Entitlements are written to the card, not the system.
-
Have you tried setting it up as a cron job?
You should be able to set it up to run hourly/daily/weekly/monthly etc.
It is in menu-timers-cron timers in vix image.
I haven't tried myself so let us know how you get on
-
Have you tried manually scanning for it in tuner setup?
All settings are here:
https://www.lyngsat.com/ST-2.html
Make sure "system " setting is DVB-S2 as that is a hd frequency.
Also if your not getting anything on all vertical frequencies, your lnb / switch could be knackered.
-
Sounds like you could have a dish alignment, cabling or connection issue.
First, check all feed connections at the rear of your receiver and dish.
What is your signal strength/quality on the affected channels?
You should find it in menu- information-service or something similar.
-
No change here by altering that setting
-
Dunno if it's a bad update at all, only guessing.
As for your other issue, it don't sound good .
-
I don't have that package and mine is a white card in ubuntu server.
-
No, only showing "cardok, no entitlements"
Did you check to see if you can clear something?
-
Yip, same story but still clearing. Unusual!
-
Same here, start date is 2 years after expiry date although it still clears what i'm entitled to.
-
My white card updated last night and now shows no entitlements, although it does still clear channels.
Funny thing is that expiry date is now 2 years before start date (which is 2008)
Nothing has changed config wise and was running untouched for a long period.
I think something is being changed or a bad update (although never seen this before though)
-
You may need to create a txt-file with name backupstick or backupstick.txt in the root of your usb-stick for the backup to be created successfully.
This was the case with previous versions of ATV but not 100% sure if it applies to the latest versions.
-
-
It'll always be a game of cat n mouse.
That's what the hobby is all about.
Only way to avoid it is by using genuine provider equipment (but where's the fun in that)