Use dreambox control center (DCC) or any other ftp program:
http://linuxsat-support.com/showthread.php?t=6050
Posts by codar
-
-
Please read the rules:
http://linuxsat-support.com/showthread.php?t=15391
In order to get something, you have to share something.
Read here:
http://linuxsat-support.com/showthread.php?t=90
Thread closed (for obvious reasons) -
Quote
It was in a Pace 3100 box (which some may know is the only box that can be modified to record without paying the additional Sly subscription), although the box is SD only. Therefore I won't be able to get or share in HD.
You may be surprised, HD may work for those channels.
I have a set4nta sub with bt on sd box but bt HD clears along with espn HD. -
Had a similar problem but rebooting router while homeplugs linked sorted all connection problems.
Maybe worth a shot. -
Glad your sorted, i'll close this so.
-
Please have a read here:
http://linuxsat-support.com/showthread.php?t=15391
Thread closed.. -
Are you just changing cccam or both oscam-cccam?
Which receiver , image? -
Have a read here, it will explain things clearer:
http://linuxsat-support.com/showthread.php?t=90Also, having a read of the rules will do no harm:
http://linuxsat-support.com/showthread.php?t=15391 -
-
Quote
Sorry, I'm a newbie and are unaware of tutto.Ho just purchased a GigaBlue Quad Plus HD Linux HDTV PVR Triple Tuner T2 but the manual is in German , and even worse not chew the Inglese.QUalcuno kindly please can you indicate if c ' is around a manauale in Italian or limit a guide in some forum ?
thanks to all
hello
ZabaltegiHello, the manual can be found here: (in german)
QuoteYou can copy and paste it into google translate to convert it to italian.
P.s. Please post in English.
-
I'd dump the original image and install a different one.
You can try any backup image from here and see what takes your fancy:
http://linuxsat-support.com/forumdisplay.php?f=940
Or you could try and configure an image to your own preferences.
http://linuxsat-support.com/forumdisplay.php?f=939
Once flashed, you can load various channel lists from here:
http://linuxsat-support.com/forumdisplay.php?f=17
Or run autobouquets maker from certain images (vix has a very good one installed in their image)To manually get a channel into favourites, scroll to the channel and press menu on remote, then select "add service to bouquet" and select your bouquet (favourites)
-
The receiver is so small, it can be hid behind a tv etc.
The ir cable is used for the remote to work and can be mounted on top of a tv if the receiver is mounted behind it etc.
It also has a led in it which indicates when the box is on or in standby and flashes when performing a flash. -
The autoinstall script is still there, it is debian 6 thats outdated.
QuoteDebian 6.0 has been superseded by Debian 7.0 ("wheezy").
You can get debian 7 from here:Quote
Pick your computer architecture and install it.
Then try the rest of this tutorial fromQuoteDebian now Installed, Let's install CCcam
http://linuxsat-support.com/showthread.php?t=9834
Note: I haven't tried this myself though so can't verify if the auto installer will work with debian 7.
Let us know if your successful. -
I haven't ever needed to run more than one instance of oscam but I did come across this:
QuoteAs of ubuntu 10.04 don't use the name oscam in the script or the logfile.
Name it ServerOK.sh or Ubuntu will always find an instance of "oscam"!
Taken from here:
http://linuxsat-support.com/showthread.php?t=4431&page=3These threads may also be helpful:
http://linuxsat-support.com/showthread.php?t=12230
http://linuxsat-support.com/showthread.php?t=6484 -
It can be done with the oscam instance you already have running.
Backup your configs first.Your line to him
Change the cccam entry in oscam.conf to allow oscam to use the port cccam uses.
Quote[cccam]
port = same one you use for cccam server listening port
reshare = 1 (allows reshare)His account:
Quote[account]
user=peer1
pwd=peerpas1
group=1 (gives him access to your card if your card is in group 1)
cccmaxhops=5
cccreshare=1 (gives him reshare)Your c-line to friend then looks like
c: dyn.dns port peer1 peerpas1 (same as cline you already gave out)His line to you
The line your peer has given you just needs to be converted into a "reader" and goes into the oscam.server config.
Use the cccam convertor tool to convert it. (paste in the line and hit convert, copy the details in the bottom window and paste into the oscam.server.config file)
Good practice to change the group to 2 (if your card is in group 1)
Should look something like this:QuoteDisplay More[reader]
label =
protocol = cccam
device =
user =
password =
inactivitytimeout = 1
group = 2
cccversion = 2.1.2
ccckeepalive = 1Then, your "account" in oscam.user config can be created to reflect your existing cline to your receiver)
QuoteDisplay More[account]
user = you
pwd = your password
au = your card reader name (whatever your label is on your own card in order to update your card)
group = 1,2 (gives you access to your card plus your peers card)
cccmaxhops = 5
cccreshare = 0Delete cccam configs.
Restart oscam.
You may also wish to remove cccam altogether from server now as it isn't being used but trying to run both on the same port may cause issues.
If you get stuck, just post up or pm your full configs (remove sensitive stuff) and we'll put you in the right direction.
-
There's no official vix image for this receiver i'm afraid.
Any vix image you do find for it has been modified to run on it (and may not run smooth/stable) and has no official support.
Google will give you results. -
Not advisable to have both emu's running with same port.
Just change it over in one go.
Is your server a pc or receiver.
If it's a receiver, i'd back it up fully (just incase things go wrong), copy cccam-oscam configs to desktop and then uninstall cccam/oscam completely.
Re-install oscam only.
Configure oscam then to run as your only emu and use the port that was originally used in cccam.
Use this tool to convert your f lines/clines/nlines from your cccam config to oscam:
http://linuxsat-support.com/showthread.php?t=2569
You can find emu's on our addons panel (for receiver):
http://linuxsat-support.com/showthread.php?t=30475
If your having problems, just post them up.
Remember, having a backup of your original configs makes setting oscam up much easier. -
Down at the bottom left of the main page, you can choose your style (default is "linuxsat black")
You can change this to "linuxsat white" which should make things more visible. -
Quote
So is it the generic 64bit (x86_64) diskimage build that I download. I dont want to get it wrong.
Thanks in advance
Thats for pc, not wetek
Don't think 5.0.7 is out yet for wetek but can't be too far away.
Here is the last version for wetek (5.0.6) 16th march 2015
http://linuxsat-support.com/showthread.php?t=78743 -
Could you please post your forum user name on a piece of paper with the image.
Quote3. Pictures (please include as many as possible, front/back/top/bottom and also include your forum username on a bit of paper or card with the item(s) )
Have a read here regarding the rules to abide by when posting in this section:
http://linuxsat-support.com/showthread.php?t=21438
Thanks.
