Posts by azaz1

old but working.

Quote from mathis2506

hi Azaz1,

thanks for your reponse , i have to rename oscam.server in tuxbox/config and repace with osca -CyCEc11704 x86 or i686

my config

[reader]

label = xxxxxxxxxxxxxxx

protocol = newcamd

device = xxxxxxxxx,18000

key = 0102030405060708091011121314

user = xxxxxxxx

password = xxxxxxxxxx

inactivitytimeout = 5

disableserverfilter = 1

group = 1

disablecrccws = 1

Display More

try your own card

rename bin files and try

a lot of errors, for example youtube, but it's better than nothing

try 1704

if network working is no problem edit /boot/STARTUP file and after all

but if only boot is displayed there is no help fot it ?

only usb recowery is the solution?

Dont working :(

i know it but without flashing usb is it possible ?

Front button press in start booting or diffrent mode is possible or not ?

is it possible to return to slot1 when the image from another booted slot is damaged and did not start

display only boot

Quote from samur

Display Spoiler

azaz1 another one: https://www.linuxsat-support.c…4-x86-64-without-emu-zip/

;

this one working :)

but when i try write emm from log

21:02:49 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

21:02:54 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

and webinterface freez for a while

let it works i try more :)

1813 is working in global mode

Card is starting in GLOBAL mode

it is written in log

1884 and 1861 working in unique mode but it is not in log ?

p.s.

thanx for bin @samur

example conf for the case CWPK0 - CWPK welcom :)

19:22:15 00000000 s (main) System name = Linux

19:22:15 00000000 s (main) Host name = debian-server

19:22:15 00000000 s (main) Release = 5.10.0-8-amd64

19:22:15 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)

19:22:15 00000000 s (main) Machine = x86_64

19:22:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3688433

Warning: keyword 'sendnuid' in reader section not recognized

19:22:15 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled

19:22:15 00000000 s (main) signal handling initialized

19:22:15 00000000 s (config) 3260 service-id's loaded in 8 ms

19:22:15 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!

19:22:15 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid

19:22:15 00000000 s (net) cccam: initialized (fd=4, port=xxx)

19:22:15 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0

19:22:15 00000000 s (main) waiting for local card init

19:22:15 421A59E4 h (webif) webif: decompressed 180045 bytes back into 474608 bytes

19:22:15 421A59E4 h (webif) HTTP Server running. ip=:: port=xxx

19:22:15 6E828677 r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)

19:22:16 6E828677 r (reader) CYFRA-1813 [mouse] card detected

19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps

19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] switch nagra layer OK

19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50

19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps

19:22:20 6E828677 r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_00

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_00 is correct

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_10

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] card needs restart after 35999 CMDs

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_10 is correct

19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card is starting in GLOBAL mode

19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] ready for requests

19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] found card system nagra merlin

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] ROM: D N A S P 4 0 0

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] REV: R e v I 4 G

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] SER: ############

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] CAID: 1813

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 01 A0 (sysid)

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] -----------------------------------------

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] |id |tier |valid from |valid to |

19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] +----+--------+------------+------------+

*** buffer overflow detected ***: terminated

1884

Quote from samur

;

Versions with cak7 support and with Emu .

For those having smartcards they can do Tests and report results here with Logs....;

Code

1856, 1819, 1813, 1884, 186A, ......etc

Note: Please don't send me any " PM " because i don't have any keys ....

and thanks for testing

;

Display More

samur

misunderstanding :)

sure working

can you put here full example reader config

and bin file without emu?

from cyfta reciever

but nuid + cwekey0 for 1813 are universal too

but not public exist

Quote from fegol

Quote from azaz1

the same error card initializing

Warning: keyword 'cwekey0' in reader section not recognized

Warning: keyword 'sendnuid' in reader section not recognized

....

...

cwekey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

...

Display More

who compiled OSCam-11703-798 (Ubuntu 16.04 x86_64).zip this oscam ?

p.s.

check oscam-11703-798.armv7ve-libusb

23:09:33 00000000 s (main) System name = Linux

23:09:33 00000000 s (main) Host name = zgemmah7

23:09:33 00000000 s (main) Release = 4.10.12

23:09:33 00000000 s (main) Version = #1 SMP Thu Nov 19 14:28:03 UTC 2020

23:09:33 00000000 s (main) Machine = armv7l

23:09:33 00000000 s (main) Stb model = h7

23:09:33 00000000 s (main) Stb boxtype = h7

23:09:33 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 13671

Warning: keyword 'cwekey0' in reader section not recognized

Warning: keyword 'sendnuid' in reader section not recognized

23:09:33 00000000 s (emu) OSCam-Emu version 798

23:09:33 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 2 disabled

23:09:33 00000000 s (main) signal handling initialized

23:09:33 00000000 s (config) 3137 service-id's loaded in 6 ms

23:09:33 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!

23:09:33 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid

23:09:33 00000000 s (reader) 1813 [internal] creating thread for device /dev/sci0

23:09:33 00000000 s (reader) emulator [emu] creating thread for device emulator

23:09:33 00000000 s (main) waiting for local card init

23:09:33 009F1342 r (reader) 1813 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)

23:09:33 009F1342 r (reader) 1813 [internal] Reader sci internal, detected box type: h7

23:09:33 1A144147 r (emu) Stream key delayer initialized

23:09:33 1A144147 r (emu) Stream relay server initialized

23:09:33 1A144147 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

23:09:33 00000000 (emu) INFO: FFDecsa parallel mode = 32

23:09:33 0EDA4D25 h (webif) webif: decompressed 167747 bytes back into 411464 bytes

23:09:33 0EDA4D25 h (webif) HTTP Server running. ip=0.0.0.0 port=8081

23:09:34 1A144147 r (reader) emulator [emu] card detected

23:09:34 009F1342 r (reader) 1813 [internal] card detected

23:09:34 009F1342 r (reader) 1813 [internal] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

23:09:35 1A144147 r (reader) emulator [emu] found card system emu

23:09:35 1A144147 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

23:09:35 1A144147 r (emu) Key file not found in: /etc/tuxbox/config/oscam

23:09:35 1A144147 r (emu) Key file not found in: /var/keys

23:09:35 1A144147 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0

23:09:38 009F1342 r (reader) 1813 [internal] card needs reset before init

23:09:38 009F1342 r (reader) 1813 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

23:09:39 009F1342 r (reader) 1813 [internal] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

23:09:39 009F1342 r (reader) 1813 [internal] switch nagra layer OK

23:09:39 009F1342 r (reader) 1813 [internal] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

23:09:41 009F1342 r (reader) 1813 [internal] Rom revision: DNASP400 RevI4G

23:09:41 009F1342 r (reader) 1813 [internal] Card has DT05_00

23:09:41 009F1342 r (reader) 1813 [internal] DT05_00 is correct

23:09:41 009F1342 r (reader) 1813 [internal] Card has DT05_10

23:09:41 009F1342 r (reader) 1813 [internal] only NUID defined - enter at least CWPK0

23:09:41 009F1342 r (reader) 1813 [internal] card system not supported

23:09:41 009F1342 r (reader) 1813 [internal] Normal mode failed, reverting to Deprecated Mode

23:09:42 009F1342 r (reader) 1813 [internal] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

23:09:45 009F1342 r (reader) 1813 [internal] card needs reset before init

23:09:46 009F1342 r (reader) 1813 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

23:09:47 009F1342 r (reader) 1813 [internal] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

23:09:47 009F1342 r (reader) 1813 [internal] switch nagra layer OK

23:09:47 009F1342 r (reader) 1813 [internal] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

23:09:49 009F1342 r (reader) 1813 [internal] Rom revision: DNASP400 RevI4G

23:09:59 009F1342 r (reader) 1813 [internal] only NUID defined - enter at least CWPK0

23:09:59 009F1342 r (reader) 1813 [internal] card system not supported

23:09:59 009F1342 r (reader) 1813 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

23:09:59 009F1342 r (reader) 1813 [internal] card initializing error

nothing is change

if my nuid and cwpk0 was wrong so why working on oscam patched mega8

see my config for all my cards

1884 1813 1861

1813 is in global mode

1884 and 1861 are in unique mode

it is a difference

Quote from bingo

Not use x86_64 ....

Write samur

Sorry

from him are these dont working oscams :(

ok

if you can send me oscam x86_64 to check

Quote from xam86

Hi

So how to get fixed canal+ PL channels on Oscam ?

As I’m a bit lost now

sat-4-all

• 2021/11/07 19:26:01 00000000 s (main) System name = Linux
• 2021/11/07 19:26:01 00000000 s (main) Host name = debian-server
• 2021/11/07 19:26:01 00000000 s (main) Release = 5.10.0-8-amd64
• 2021/11/07 19:26:01 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)
• 2021/11/07 19:26:01 00000000 s (main) Machine = x86_64
• 2021/11/07 19:26:01 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2324122
• 2021/11/07 19:26:01 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
• 2021/11/07 19:26:01 00000000 s (main) signal handling initialized
• 2021/11/07 19:26:01 00000000 s (config) 3260 service-id's loaded in 8 ms
• 2021/11/07 19:26:01 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
• 2021/11/07 19:26:01 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid
• 2021/11/07 19:26:01 00000000 s (net) cccam: initialized (fd=4, port=xxx)
• 2021/11/07 19:26:01 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0
• 2021/11/07 19:26:01 00000000 s (main) waiting for local card init
• 2021/11/07 19:26:01 3BFB9C0A h (webif) webif: decompressed 200214 bytes back into 511792 bytes
• 2021/11/07 19:26:01 3BFB9C0A h (webif) HTTP Server running. ip=:: port=xxx
• 2021/11/07 19:26:01 74C69663 r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
• 2021/11/07 19:26:02 74C69663 r (reader) CYFRA-1813 [mouse] card detected
• 2021/11/07 19:26:03 74C69663 r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
• 2021/11/07 19:26:03 74C69663 r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps
• 2021/11/07 19:26:03 74C69663 r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> switching to Nagra CAK7
• 2021/11/07 19:26:03 74C69663 r (reader) CYFRA-1813 [mouse] Initial AES: 17 74 8F 61 D8 7C E8 AB 4C
• 2021/11/07 19:26:03 74C69663 r (reader) CYFRA-1813 [mouse] switch to nagra layer OK
• 2021/11/07 19:26:05 74C69663 r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50
• 2021/11/07 19:26:05 74C69663 r (reader) CYFRA-1813 [mouse] Initial AES: 61 37 07 6B 39 45 A1 49 A7
• 2021/11/07 19:26:05 74C69663 r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps
• 2021/11/07 19:26:06 74C69663 r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G
• 2021/11/07 19:26:06 74C69663 r (reader) CYFRA-1813 [mouse] Card has DT05_00
• 2021/11/07 19:26:06 74C69663 r (reader) CYFRA-1813 [mouse] DT05_00 is correct
• 2021/11/07 19:26:06 74C69663 r (reader) CYFRA-1813 [mouse] Card has DT05_10
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] OTP CSC No. of keys: 00 01
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] OTA CSC No. of keys: 00 00
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] card needs restart after 35999 CMDs
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] +------------+
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] |SESSION DATE| 2021/11/07 19:23:57
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] +------------+
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] DT05_10 is correct
• 2021/11/07 19:26:07 74C69663 r (reader) CYFRA-1813 [mouse] card is working in GLOBAL mode
• 2021/11/07 19:26:08 74C69663 r (reader) CYFRA-1813 [mouse] +-------+
• 2021/11/07 19:26:08 74C69663 r (reader) CYFRA-1813 [mouse] |New AES| B 3A 5F 27 08 A2 20 73
• 2021/11/07 19:26:08 74C69663 r (reader) CYFRA-1813 [mouse] +-------+
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [mouse] ready for requests
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [mouse] found card system nagra merlin
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] +------------------------------------+
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] All EMM FILTERS (5) added successfully
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] +------------------------------------+
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] ROM: D N A S P 4 0 0
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] REV: R e v I 4 G
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] SER: ############
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 01 A0 (sysid)
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] +--------------------------------------------------------+
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] |Provider ID |valid from |valid to |
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] +------------+---------------------+---------------------+
• 2021/11/07 19:26:09 74C69663 r (reader) CYFRA-1813 [nagra merlin] | 01A0 |1992/01/01 |2022/01/01 06:00:27 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] | 0068 |1992/01/01 |2021/12/31 06:10:09 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] | 0065 |1992/01/01 |1992/01/01 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] ----------------------------------------------------------
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |id |tier |valid from |valid to |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] +----+-------+---------------------+---------------------+
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|0020 |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|0061 |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|0064 |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|00AA |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:10 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|00AF |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:11 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|0074 |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:11 74C69663 r (reader) CYFRA-1813 [nagra merlin] |0068|0076 |1992/01/01 |2036/04/16 |
• 2021/11/07 19:26:11 74C69663 r (reader) CYFRA-1813 [nagra merlin] +--------------------------------------------------------+

i dont know yours oscam

my whole initialized log

18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] only NUID defined - enter at least CWPK0

18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] card system not supported

it is problem of wrong oscam

bingo

where is your start card log

your logs of ecm or emm mean nothing !!!

if you dont put start log your card is proxy not local

see you!!!