Posts by azaz1

  • OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

    Quote from bingo

    (1813@000068/0000/3ABD/64:A2BFE645FC34612769E2C370BC31C673): cache2 (270 ms) by CAMELEON_1813 - TVP 1 HD

    NC+_1813 [nagra merlin] Successfully added EMM to /etc/tuxbox/config/CAMELEON_1813_global_emm.log


    bingo

    log initializing card put here

    ( OSCam-11703-798 )

    your log is from cache not local card

    (lg) local generated


    TVP HD is not 6A cak7

    1813 is tunelled seca 0100:000068 card

    check Canal+ Sport,Film,Family, Seriale,Premium,+1

    log should look like...

    (ecm) zgamma (32DE-0000.[1813-000068--6A].444FF660/-HOP:00): found (323 ms) by CYFRA-1813 - CANAL+ SPORT HD (tier 0076 | CWPK0) (lg)

    (reader) CYFRA-1813 [nagra merlin] Successfully added EMM to /var/etc/CYFRA/CYFRA-1813_global_emm.log


    1884 log

    (ecm) zgemma (32DE-0000.[1884---8F].E4CC8E09/-HOP:00): found (200 ms) by NC+1884 - CANAL+ SPORT HD (tier 0089 | CWPK0) (lg)


    OSCam-11703-798 (Ubuntu 16.04 x86_64).zip

    the same error card initializing

    18:45:16 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11703-798 (x86_64-ubuntu16.04-linux-gnu)

    18:45:16 00000000 s (main) System name = Linux

    18:45:16 00000000 s (main) Host name = debian-server

    18:45:16 00000000 s (main) Release = 5.10.0-8-amd64

    18:45:16 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)

    18:45:16 00000000 s (main) Machine = x86_64

    18:45:16 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2312799

    Warning: keyword 'cwekey0' in reader section not recognized

    Warning: keyword 'sendnuid' in reader section not recognized

    18:45:16 00000000 s (emu) OSCam-Emu version 798

    18:45:16 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled

    18:45:16 00000000 s (main) signal handling initialized

    18:45:16 00000000 s (config) 3260 service-id's loaded in 8 ms

    18:45:16 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!

    18:45:16 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid

    18:45:16 00000000 s (net) cccam: initialized (fd=4, port=xxx0)

    18:45:16 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0

    18:45:16 00000000 s (reader) emulator [emu] creating thread for device emulator

    18:45:16 00000000 s (main) waiting for local card init

    18:45:16 0C1E0FBF r (emu) Stream key delayer initialized

    18:45:16 0C1E0FBF r (emu) Stream relay server initialized

    18:45:16 0C1E0FBF r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

    18:45:16 00000000 (emu) INFO: FFDecsa parallel mode = 128

    18:45:16 0C1E0FBF r (reader) emulator [emu] card detected

    18:45:16 7AE391B9 h (webif) webif: decompressed 179267 bytes back into 477272 bytes

    18:45:16 7AE391B9 h (webif) HTTP Server running. ip=:: port=xxxx

    18:45:16 53C2643D r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)

    18:45:17 53C2643D r (reader) CYFRA-1813 [mouse] card detected

    18:45:17 0C1E0FBF r (reader) emulator [emu] found card system emu

    18:45:17 0C1E0FBF r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    18:45:17 0C1E0FBF r (emu) Key file not found in: /var/etc/CYFRA

    18:45:17 0C1E0FBF r (emu) Cannot open key file path: /var/keys

    18:45:17 0C1E0FBF r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0

    18:45:18 53C2643D r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

    18:45:18 53C2643D r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps

    18:45:18 53C2643D r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

    18:45:18 53C2643D r (reader) CYFRA-1813 [mouse] switch nagra layer OK

    18:45:19 53C2643D r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50

    18:45:19 53C2643D r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps

    18:45:20 53C2643D r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] Card has DT05_00

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] DT05_00 is correct

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] Card has DT05_10

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] only NUID defined - enter at least CWPK0

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] card system not supported

    18:45:21 53C2643D r (reader) CYFRA-1813 [mouse] Normal mode failed, reverting to Deprecated Mode

    18:45:23 53C2643D r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

    18:45:23 53C2643D r (reader) CYFRA-1813 [mouse] card needs reset before init

    18:45:24 53C2643D r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

    18:45:24 53C2643D r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

    18:45:24 53C2643D r (reader) CYFRA-1813 [mouse] switch nagra layer OK

    18:45:26 53C2643D r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50 34 30 30 20 52 65 76 49 34 47

    18:45:27 53C2643D r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G

    18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] only NUID defined - enter at least CWPK0

    18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] card system not supported

    18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

    18:45:29 53C2643D r (reader) CYFRA-1813 [mouse] card initializing error

    18:45:30 00000000 s (main) init for all local cards done



  • OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

    debian11 x86_64

    OpenSSL 1.1.1k


    keys are cuted

  • OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

    1884

  • OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

    1813

  • OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

    1861

    something is wrong :(

    cant open any cards

  • backup restore to other slot like 1 ( h7s )

    i just zip BackupSuite directoty ( hdd> fullbackup_h7>directory of backup )

    than put it to hdd> downloaded_images as*.zip file

    rename to xxx-zgemmah7-DATE_usb.zip

    and in menu>setup> install image> downloaded images restore where i want


    btw

    Code
    Code
    is it possible to return to slotu1 when the image from another booted slot is damaged and did not start

I mean without using telnet or uploading via usb

    greets

  • backup restore to other slot like 1 ( h7s )

    Quote from urie

    Its simple press Menu > Standy / Restart > Recovery Mode > System will reboot to boot Image selection Menu.

    Press Bootmenu Select Flash local image and select the backup image you want from images folder on hard drive.


    Then select which Partition you wanto to recover image to.

    i mean in openpli image

    there is not recovery mode i n menu

    i use backupsuite and only to slot 1 i can restore backup image

    mayby i am wrong ?