Posts by sparky stu

  • Zgemma H.2S not Star Image needed

    Hi Guys and Gals O and Admin


    Anyway I have just received 2 Zgemma H.2S boxes from my brother, I told him to get Star but as usual hes an idiot. Anyway I am having problems to find any images with softcam already installed. Can get OpenATV on it, but no matter how I try to install cams, none of them seem to work. It all looks ok on the installation side. Tried using USB and also FTP into the Temp folder then install from the box.


    Tried TS Pannel
    along with


    enigma2-plugin-extensions-linuxsat-support-addons_1.2_all.ipk
    softcam-feed-mipsel_1.0_all.ipk


    Starting to pull my hair out with this, I know it is something I am doing wrong, but cant figure it out. I have also put in this part of the forum as it isnt a Zgemma Star box, however do think as these are the newer boxes from Zgemma we may need to alter the title area and group them all together.




    Thanks in advance for any tips

  • s/w D15_144p

    Can anybody tell me how to flash 1 of these boxes


    My mate has 1 which isnt working atm, so I want to try upgrade firmware and then put on new channel list.


    What he does after that is up to him.


    From my very limited knowlege of this box, I know you need to press the green button for cam info, but nothing comes up even though it is patched

  • Media Art 7 Ultra Firmware and Channel List

    I know the channel list still needs some work, but as the online option has not been updated in over a year, this is much more upto date than any I have found. I will add a completed list within the next few days when I get round to doing it


    - - - Updated - - -


    Having problems to get the firmware to upload, if you need it PM me and I will send over direct


    - - - Updated - - -


    arrrggghhh

  • Who are you voting for ???

    Graham Stringer Labour 18,563
    James Edsberg Conservative 6,260
    William Hobhouse Liberal Democrat 4,861
    Derek Adams British National Party 2,469
    Kay Phillips Respect-Unity Coalition 996
    Bob Willescroft UK Independence Party 894
    Shafiq-Uz Zaman Christian Party 161


    This was the result from 2010 where I lived at the time. Being honest Nick Clegg made the biggest mistake possible in 2010. He should have come out on record and stated to both Lab & Con, that he would support either party 100% on all its policys on the agreement that the 2015 would be a proportional representation this time. I expect it will be Hung again and only hope that whoever holds the votes needed to form Parliament will hold either of the larger 2 by the balls and then force PR for 2020. Then and only then will every vote matter.


    Total Turn out in 2010 was only 65.1 %


    I would vote for UKIP or GREEN if it made any differance on a national level, however if I vote for anything other than Labour in this safe Lab seat, all I do is risk opening it up to Con takeover. However PR would allow me to vote my views, again voting UKIP here is a wasted vote unless we get PR as I live in a very large immigration area where white is not in majority.

  • Icecrypt S3700 stuck on boot

    I have a 3700 with the same issue, I spoke to Ray at Icecrypt several months ago and he seemed to think it was a fault in the boot loader, he asked me to return back to him as not something that he can give out the software for. As to date I have not bothered as I just put my old Alien 2 back on instead.


    Sorry this may not be the answer you were after, but I will say. I have found Ray to be the most helpful person in any companies tech support and will do whatever he can to help.

  • Spark Plug-ins?

    You need the plugin called oscam4spark_tools.s this is in the plugin pack normally


    Press the OK button so it goes green then highlight the line again and press the red button to start the OSD.


    Then go to config after that its all up to you, but if you can't work that out from there, you really shouldn't be here either.


    However as I am a nice person really, PM me if you get stuck. Any more and the cyber police may line us up against a wall and shoot me!

  • MGcamd log

    You will need to supply more info than that, also direct your question to the area you need help with within the log, also what your aim is at the end of it.


    I am not the best on this myself, but unless you give info and ask the right question your responses will be very few if any.

  • Neosat 9900HD Spectra FTP or Channel List

    I have just been given 1 of these boxes, it has proton image.


    Model ALi_3606


    It has the latest version of the software on it 05/09/13 0A010600_1.5.74 EMU


    I need either some way to upload a channel list to it, or FTP settings for the box so can upload that way.


    Firmware update deleted all the channels and favs. I have rescanned the box but lots of work to do manually as have it on my motorized atm.


    Any help of links would be great

  • Can't boot to enigma

    It has been a while since I did this, however I am almost certain you can install it via Spark from the PLUGIN menu.


    Def an e2 install in there, I have just looked, but as I prefer Spark as my mum can see the TV Wall better I aint trying it for you unless you fail to get it going after trying all of the above.


    Any problems, then I will as I have restore image, but aint pissing my mum off while she is watching TV lol

  • Icecrypt S3700 usb not recognized

    Icecrypt Number is Tel: 01795 429 666


    As to speak to Ray Gee in Technical, very helpful guy. Will dropbox things also and prob has the power to issue a returns number, but never have needed one as Ray has talked me through any issues.

  • OSCAM on Android using Newcamd

    I will have a play and set up another Oscam Cccam server, give myself a feed line from the 1st as only have the 1 card, but that is not a problem making the line a reader.


    Then see about setting this box up alone as a Cccam and if works I will get back to you

  • OSCAM on Android using Newcamd

    Hi Bud


    I have a PC server with local card, All boxes are different. 1 is an TM500s, old but still works ok, I have F3 box on, crap but works. I have an amiko alien 2 running in spark and also have amiko micro with magic eye, that is in my caravan. But I delete that from the server when I am not around.


    However if I forget to add in a line for the mini before I go to my van, I know my server details, username and password on all my boxes, so not a problem.

  • OSCAM on Android using Newcamd

    1a3ce828ac.jpg


    Box 1 and 3 are currently switched off but work ok, box 2 is on freeview


    box 4 and 5 are the same box being honest on 2 different lines, 1 is NEWCAMD in the box the other is MGCamd.


    As you can see it is saying, unknown please report. That is in the protocols area


    I have not got a clue where to start looking for this, they are android based boxes, the cam is IpCam v2.4.8 which came with the box on a memory stick.


    Boxes are Mediaart 7 ultra.


    I have the XBMC working fully and can view on IPTV also. so id not a major problem for most things, however would still like to get the sat side of things working.


    I think hybrid boxes are now starting to hold their own, not there yet. But the fact I can download any app, use XBMC, stream stuff and if get working use for home sat system. All for £150 think it becomes a very interesting little box to play with.

  • OSCAM on Android using Newcamd

    Can anybody tell me where to look for the protocol in OSCAM 120.
    Where I may find others or settings to install.


    I have a full back up of my server so not bothered if I crash it, only 5 boxes around the house on it