Honcho thanks alot dude, Never heard truer words spoken, And moffi, Yes that was a prety pointless answer, Why would i be on a CS forum asking for help if i was happy to pay stupid bills, Not gonna happen, All i was simply asking was how to setup oscam on a duo, Do not need stupid replies like yours, This is a place we come to help each other not put each other down, You seem like you have a real negative attitude, I feel sorry for ya dude,
Cazuella, Ive tried the line in a zgemma s2 and works fine, not a single glitch,
Posts by supersoupdogg
-
-
Because noone else in the familys box freezes just mine,
Does oscam not do a better job?
-
Hello, I have a Vu+ Duo Genuine, i have also got 2 c lines to friends servers, I currently run a CCcam 2.3.0 on it and notice some freezes but it is not the servers fault, Is it possible to setup both lines in the box and let the box work out which is best to use, I was told use oscam but have no clue how to do this, At the minute i have about 98% up time, Im just trying to stop those remaining few annoying freezes if possible to keep the missus happy..... I get slagged every time it freezes and asked to pay sky the full price which i couldnt bring myself to do,
- - - Updated - - -
bump................
-
Hello all, I have a genuine VU+ Duo, Also have a zgemma H2S in the bedroom, I was wondering is it possible to put any kind of Movie/TV Show streaming setup on either or both if possible, I read something about kodi direct, Got the kodi direct plugin installed onto the boxes ok but not sure hoo to add all the links i need to stream content,
Any help here would be great,
Also Merry Christmas to everyone.. ;-)
-
Hello all, As the thread title states, I have a VU+ Duo here from a friend, I know its a genuine one too, Its having some power issues, It would not boot at all due to defective PSU board, I have got a replacement from ebay and the box now boots but has some problems using the HDD due to Low voltage on the 12v rail when load is applied, I have tested the box using my PSU from my own duo and all is working fine so its defo the power board, My guess is a cap or something but which one, I can solder so swapping it is no bother, Plus i have the old board so i have the parts needed hopefully, Symptoms of old board is no lights at all, no DC voltage on it at all, Im not an electronics engineer but have a basic understanding of general electric components and i can solder prety well
-
Hi all, I have a Genuine VU+ DUO Original Version, I was wanting to make the most of the box but im a bit of a noob at this, Is there any apps for my duo like kodi for streaming movies and tvshows, I have the satellite side of thing setup the way i like it but ive just been reading theres a kodi app just unsure if my box supports it,
I reinstalled everything yesterday and im now running the latest version of OpenVix 4.1.009
-
I have yeah, happened me then i updated to latest build and no different,
-
Can anyone help here? Haven't been able to get this sorted yet...
-
Thanks mate, And yes i had that on there before but removed it to see if it made a difference and forgot to add it back, I put it back in there and still the same problem....
- - - Updated - - -
Anyone any ideas, Ive went through it all again and still cant see anything wrong but i must be doing something wrong for it to not work,
-
Any luck yet? Having a similar problem here myself,
-
Hi all, I have oscam 1 at home with 0960 card, I also have oscam 2 on a VPS with a few family and friends connected to it, Only reason i use a vps is because i live in the countryside and we often have power cuts and also network speed here is prety poor, I originally had it setup for 0963 white card but then S*Y sent me out new 0960 red card. I still have a few shares on VPS oscam with other channels i dont pay for but they are 0963,
Is it possible to set oscam to use my 0960 card more so its not using others 0963 cards and cache? I have tried to tweak it as best i can but can just get it to connect but not pull ECM from my card but when i connect box directly to oscam 1 through NOIP so not on local network i can clear channels ok,
Here is an example of my setup. Im not the best at this now so forgive me for any mistakes i have made.. ;-)OSCAM 1 (My house)
Code
Display Moreoscam.conf [global] nice = -1 logfile = /var/log/oscam.log clienttimeout = 5000 fallbacktimeout = 580 clientmaxidle = 10 cachedelay = 120 bindwait = 120 resolvedelay = 30 serialreadertimeout = 1500 maxlogsize = 10 waitforcards = 1 preferlocalcards = 1 saveinithistory = 1 keepalive = 1 [cache] delay = 5 max_time = 30 max_hit_time = 30 wait_time = 350,0963:260,0960:260 csp_ecm_filter = 0960,0963 csp_allow_reforward = 1 cacheex_cw_check = 0:1:1 csp_allow_request = 0 cwcycle_check_enable = 1 cwcycle_check_caid = cwcycle_maxlist = 4000 cwcycle_keeptime = 20 cwcycle_sensitive = 0 cwcycle_usecwcfromce = 1 [cs378x] port = ***** [dvbapi] enabled = 1 user = card-update-line boxtype = ***** au = 1 [newcamd] port = *****@0960:000000 key = 0102030405060708091011121314 keepalive = 1 mgclient = 1 [cccam] port = ***** version = 2.1.3 build = 3165 reshare = 1 [monitor] port = 989 nocrypt = 127.0.0.1 aulow = 120 monlevel = 0 [webif] httpport = ***** httpuser = ***** httppwd = ***** httprefresh = 15 httpallowed = 0.0.0.0-255.255.255.255 debug = 255 oscam.server [reader] label = S*Y-UK-0960-RED description = protocol = pcsc device = 0 caid = 0960 boxid = ******* detect = cd mhz = 450 cardmhz = 2700 ident = 0960:000000 group = 1 emmcache = 1,3,2,0 blockemm-unknown = 1 blockemm-g = 1 saveemm-u = 1 saveemm-s = 1 oscam.user [account] user = ***** pwd = ***** caid = 0960 group = 1 max_connections = 10
OSCAM 2 (VPS)Code
Display Moreoscam.conf [global] nice = -1 logfile = /var/log/oscam.log clienttimeout = 5000 fallbacktimeout = 580 clientmaxidle = 10 cachedelay = 120 bindwait = 120 resolvedelay = 30 serialreadertimeout = 1500 maxlogsize = 10 waitforcards = 1 preferlocalcards = 1 saveinithistory = 1 keepalive = 1 lb_mode = 1 lb_save = 500 [cache] delay = 5 max_time = 30 max_hit_time = 30 wait_time = 350,0963:260,0960:260 csp_ecm_filter = 0960,0963 csp_allow_reforward = 1 cacheex_cw_check = 0:1:1 csp_allow_request = 0 cwcycle_check_enable = 1 cwcycle_check_caid = 0960,0963 cwcycle_maxlist = 4000 cwcycle_keeptime = 20 cwcycle_sensitive = 0 cwcycle_usecwcfromce = 1 [cs378x] port = ***** [dvbapi] enabled = 1 user = cardupdateline boxtype = dreambox au = 1 [newcamd] port = *****@0960:000000 key = 0102030405060708091011121314 keepalive = 1 [cccam] port = ***** version = 2.1.3 build = 3165 reshare = 1 [webif] httpport = ***** httpuser = ***** httppwd = ***** httprefresh = 15 httpallowed = 0.0.0.0-255.255.255.255 debug = 255 [monitor] debug = 255 oscam.server [reader] label = ****-0960 protocol = newcamd device = ********.noip.me,**** key = 0102030405060708091011121314 user = ***** password = ***** inactivitytimeout = -1 disableserverfilter = 1 connectoninit = 1 cacheex_allow_request = 1 cacheex_drop_csp = 1 group = 1 oscam.user [account] user = updateline pwd = update caid = 0960 ident = 0960:000000 group = 1 ident = 0960:000000 max_connections = 8
- - - Updated - - -
This is the error showing in the live log
2016/03/07 11:19:45 57DAB05E c (ecm) cardupdateline (0960@000000/FFFF/183E/63:E4D3E70ABFBA0945BB24EA06D36F2F9A): rejected group (0 ms) (no matching reader)
But i definitely have both reader and user groups set to 1 and have also tried changing both groups to 15 to see if it made a difference but no joy still,
-
Hi all, I have here an ibox 4, Its stuck on red light and will not flash using usb, tried multiple images, bootlaoders and usb's and still no good, I've been readin up a bit and see a fix for the ibox 1, 2 and 3 but no 4, i know the 4 is a clone and not a real box but was just wondering is it possible to save it, Support online for this model is pretty limited, I can solder so can JTAG it if needed, Just need a bit of advice on how to or pointed to any existing guides. Dont know if the process is the same as the ibox 3,
-
bear in mind opentvprovider wont work on that box
use rytec it works
Reflashed to Nemesis 2.6 image and all now working fine, even open tv on cross epg.. ;-)
-
Hi all, I'm trying to setup my brothers dm800hd sim 2.10 ssl 84, I am using the openpli image and cross epg came preinstalled so i think its the correct version, Every time i press ok on cross epg in setup menu the box crashes, I think its related to a typo in keymap file but not sure exactly, here is the crash log
XML
Display More<?xml version="1.0" encoding="utf-8"?> <openpli> <enigma2> <crashdate>Sat Apr 11 22:39:32 2015</crashdate> <compiledate>May 10 2014</compiledate> <contactemail>forum at www.openpli.org</contactemail> <!-- Please email this crashlog to above address --> <skin>PLi-HD/skin.xml</skin> <sourcedate>May 10 2014</sourcedate> <branch>(no branch)</branch> <rev></rev> <version>3.0.0</version> </enigma2> <image> <stbmodel>dm800</stbmodel> <kernelversion> <![CDATA[ Linux dm800 2.6.18-7.4-dm800 #1 Fri Jan 18 22:00:51 CET 2013 7401c0 GNU/Linux ]]> </kernelversion> <kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=null</kernelcmdline> <nimsockets>NIM Socket 0:</nimsockets> <imageversion> <!-- No such file or directory --> </imageversion> <imageissue> <![CDATA[ OpenEmbedded Linux %h openpli 2.1 %h ]]> </imageissue> </image> <crashlogs> <enigma2crashlog> <![CDATA[ + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 16384k video mem - double buffering available! 9184kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) + (9) gLCDDC lcd buffer 0x746180 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox front panel" is a remotecontrol Input device "dreambox remote control (native)" is a remotecontrol Input device "dreambox advanced remote control (native)" is a remotecontrol Input device "dreambox ir keyboard" is a keyboard Input device "dreambox ir mouse" is a mouse Found 5 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. cannot open /proc/stb/tsmux/input0 cannot open /proc/stb/tsmux/input1 done, found 0 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) main thread is non-idle! display spinner! no spinner DC! loaded 1061 channels/transponders and 12594 services scanning for frontends.. opening frontend 0 close frontend 0 found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait8.png found 7 spinner! setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! Failed to open /dev/dbox/fp0 Scanning hardware info Detected: dm800 [Harddisk] enumerating block devices... new Harddisk sda -> /dev/sda -> /dev/sda [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda') Reading satellites.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Alps BSBE2, need rotorworkaround Yes, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: single sec config completed loading bouquet... /etc/enigma2/bouquets.tv 1 loading bouquet... /etc/enigma2/userbouquet.ukcvs00.tv 1 1042 entries in Bouquet userbouquet.ukcvs00.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs01.tv 1026 136 entries in Bouquet userbouquet.ukcvs01.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs02.tv 1161 27 entries in Bouquet userbouquet.ukcvs02.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs03.tv 1187 41 entries in Bouquet userbouquet.ukcvs03.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs04.tv 1227 32 entries in Bouquet userbouquet.ukcvs04.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs05.tv 1258 41 entries in Bouquet userbouquet.ukcvs05.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs06.tv 1298 20 entries in Bouquet userbouquet.ukcvs06.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs07.tv 1317 38 entries in Bouquet userbouquet.ukcvs07.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs08.tv 1354 17 entries in Bouquet userbouquet.ukcvs08.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs09.tv 1370 36 entries in Bouquet userbouquet.ukcvs09.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs0a.tv 1405 29 entries in Bouquet userbouquet.ukcvs0a.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs0b.tv 1433 38 entries in Bouquet userbouquet.ukcvs0b.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs0c.tv 1470 68 entries in Bouquet userbouquet.ukcvs0c.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs0e.tv 1537 3 entries in Bouquet userbouquet.ukcvs0e.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs10.tv 1539 33 entries in Bouquet userbouquet.ukcvs10.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs11.tv 1571 21 entries in Bouquet userbouquet.ukcvs11.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs12.tv 1591 2 entries in Bouquet userbouquet.ukcvs12.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs13.tv 1592 6 entries in Bouquet userbouquet.ukcvs13.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs14.tv 1597 296 entries in Bouquet userbouquet.ukcvs14.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs15.tv 1876 103 entries in Bouquet userbouquet.ukcvs15.tv loading bouquet... /etc/enigma2/userbouquet.ukcvs16.tv 1962 15 entries in Bouquet userbouquet.ukcvs16.tv loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1976 0 entries in Bouquet userbouquet.LastScanned.tv loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1976 0 entries in Bouquet userbouquet.favourites.tv 23 entries in Bouquet bouquets.tv loading bouquet... /etc/enigma2/bouquets.radio 1 loading bouquet... /etc/enigma2/userbouquet.ukcvs00.radio 1 62 entries in Bouquet userbouquet.ukcvs00.radio loading bouquet... /etc/enigma2/userbouquet.dbe29.radio 62 0 entries in Bouquet userbouquet.dbe29.radio loading bouquet... /etc/enigma2/userbouquet.favourites.radio 62 0 entries in Bouquet userbouquet.favourites.radio 3 entries in Bouquet bouquets.radio /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) Unknown device type: dreambox front panel Activating keymap: Default (US) [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap Activating language English --> setting scaler_sharpness to: 0000000D couldn't open /proc/stb/misc/12V_output [ePopen] command: ip -o addr show dev eth0 setLCDBrightness 25 setLCDBrightness 127 [SoftcamSetup] fallback to default translation for Softcam setup [SoftcamSetup] fallback to default translation for Lets you configure your softcams [Ipkg] Added to OPKG destinations: /media/hdd /usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead BBCiMenu BBC Most Popular BBC Highlights / Featured BBC One BBC Two BBC Three BBC Four CBBC CBeebies BBC Parliament BBC News BBC Alba BBC HD BBC Entertainment BBC Drama BBC Comedy BBC Childrens BBC Factual BBC Films BBC Music BBC Sport Plugin Extensions/WebInterface failed to load: No module named plugin Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface [AutoBouquets] set language to en [AutoBouquets] fallback to default translation for Daily [AutoBouquets] fallback to default translation for Weekly [AutoBouquets] fallback to default translation for 30 Days [AutoBackup] fallback to default translation for Automatic settings backup wsize 1280 [AudioSync] fallback to default translation for Audio Sync Setup [AudioSync] fallback to default translation for Setup for the Audio Sync Plugin [AudioSync] fallback to default translation for Audio Sync [AudioSync] fallback to default translation for sets the Audio Delay (LipSync) getModeList for port DVI-PC getModeList for port YPbPr getModeList for port Scart getModeList for port DVI-PC getModeList for port DVI hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto setMode - port: DVI mode: 1080i rate: multi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto [CrossEPG] set language to en [CrossEPG_Loader] patch epgcache.load() found [CrossEPG_Loader] patch Oudeis found [NetworkBrowser] fallback to default translation for NetworkBrowser [NetworkBrowser] fallback to default translation for Search for network shares [NetworkBrowser] fallback to default translation for MountManager [NetworkBrowser] fallback to default translation for Manage network shares [NetworkBrowser] fallback to default translation for Mount again [NetworkBrowser] fallback to default translation for Attempt to mount shares again [Softcam] Started restarting enigma dreambox starting hotplug handler wasTimerWakeup failed! [AutoBouquets] AutoStart Enabled [AutoBouquets] AutoBouquets Schedule Disabled at (now=Sat 11 Apr 2015 22:35:37 IST) [EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat' [EPGC] time updated.. start EPG Mainloop [SKIN] Parsing embedded skin <embedded-in-'Screensaver'> [SKIN] No skin to read... RemovePopup, id = ZapError setValue 90 Setvolume: 100 100 (raw) Setvolume: 0 0 (-1db) Setvolume: 90 90 (raw) Setvolume: 7 7 (-1db) [CrossEPG_Loader] /usr/crossepg/crossepg_epgcopy /media/hdd/crossepg/ext.epg.dat /media/hdd/epg.dat [EPGC] /media/hdd/epg.dat not found, try /epg.dat playing 1:0:1:287A:800:2:11A0000:0:0:0::BBC Two NI [EPGC] 32120 events read from /media/hdd/epg.dat not pauseable. not pauseable. not pauseable. new service started! trying to download cuts! download failed, no cuesheet interface RemovePopup, id = ZapError allocate channel.. 0800:0002 opening frontend 0 (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 10817500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1067 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:287A:800:2:11A0000:0:0:0::BBC Two NI allocate demux [ePopen] command: route -n | grep eth0 poll: unhandled POLLERR/HUP/NVAL for fd 31(16) poll: unhandled POLLERR/HUP/NVAL for fd 36(16) poll: unhandled POLLERR/HUP/NVAL for fd 38(16) [SEC] set static current limiting [SEC] invalidate current switch params [SEC] setVoltage 1 [SEC] sleep 10ms set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms 192.168 169.254 0.0.0.0 nameservers: [[192, 168, 1, 254]] read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 72], 'up': True, 'mac': '00:09:34:28:26:41', 'dhcp': True, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 254]}} AT plugin not found ER plugin not found [OpenWebif] no plugins to load [OpenWebif] started on 80 [OpenWebif] started on 443 poll: unhandled POLLERR/HUP/NVAL for fd 34(16) (0)fe event: status 1, inversion off, m_tuning 2 (0)fe event: status 1f, inversion off, m_tuning 3 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x1ec24f0 running [eEPGCache] channel 0x1ec24f0 running [EPGC] next update in 2 sec stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (1644), and 1 audio stream(s) (1645), and the pcr pid is 1644, and the text pid is 1647 allocate demux decoder state: play, vpid=5700, apid=5701 DMX_SET_PES_FILTER(0x1644) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0x1645) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x1644) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x1647) - ttx - ok DEMUX_START - ttx - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok AUDIO_CHANNEL_SELECT(0) - ok disable teletext subtitles page ffffffffffffffff (und) not pauseable. not pauseable. [eDVBCAService] new service 1:0:1:287A:800:2:11A0000:0:0:0::BBC Two NI [eDVBCAService] add demux 0 to slot 0 service 1:0:1:287A:800:2:11A0000:0:0:0::BBC Two NI RemovePopup, id = ZapError [SEC] set dynamic current limiting VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok PATready use pmtpid 0108 for service_id 287a eventNewProgramInfo 0 0 have 1 video stream(s) (1644), and 1 audio stream(s) (1645), and the pcr pid is 1644, and the text pid is 1647 decoder state: play, vpid=5700, apid=5701 [eDVBCIInterfaces] gotPMT VIDEO_GET_EVENT - ok [Dish] tuning failed VIDEO_GET_EVENT - ok sdt update done! [EPGC] start caching events(1428788148) [eDVBLocalTimerHandler] diff is 0 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time [eDVBLocalTimerHandler] not changed [EPGC] abort non avail schedule reading [EPGC] abort non avail schedule other reading [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail viasat reading [EPGC] nownext finished(1428788155) action -> CoolTVGuide CoolMenu unknown action CoolTVGuide/CoolMenu! typo in keymap? action -> InfobarMenuActions mainMenu loading mainmenu XML... TimerEdit TimerEditList PluginBrowser PluginBrowser action -> OkCancelActions ok okbuttonClick ParentalControlSetup ParentalControlSetup SoftwareUpdate UpdatePlugin action -> OkCancelActions ok okbuttonClick Traceback (most recent call last): File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action File "/usr/lib/enigma2/python/Screens/Menu.py", line 50, in okbuttonClick File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__ TypeError: setup() got an unexpected keyword argument 'close' (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x1e6f080>>,('OkCancelActions', 'ok')) failed) getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??) ]]> </enigma2crashlog> </crashlogs> </openpli>
-
Title says it all... Ive no clue where to start or even if its possible on neutrino... I see guides for enigma1 only, If someone knows how this is done can you please point me to a good guide or tell here how its done, Thanks.. ;-)
-
This reply is probably too late but maybe you should try upgrade the image then upgrade bouquets, Depending on which version you are on now as ive seen it move about a bit. I had an issue before with box nation where i would run autobouquets and still it would not clear properly, upgraded image from the menu and ran autobouquets again then it worked. press blue then go to commando toolbox, then loox for "check for updates" or something along those lines, Haven't got a box setup here so can't check. Hope this helps.
-
But i'd like to keep it enabled as i use it a good bit... ;-) I've had it running open pli before with no issues, Just thought maybe someone would have had the same problem before as its happened on more than one box...??
-
Anyone any ideas?? ;-)
-
Hi all, I flashed my box with open pli and now every time i go to change channel i get a message asking if i want to stop timeshift. I have set the option to Don't save but it's like it's stuck on ask user no mater what i select. Anyone know how to fix this? I've reflashed and also it does the same on my mates dm800hd. Both are sim 2.10 clones with SSL 87, Any help is much appreciated.. ;-)
-
yeah funny enough i do know that but when i press record it only gives me the option for add timer or auto timer???