Posts by rider

  • solo2 problem help please

    now i just tried to leave it on an encrypted channel on stand by it looks it is ok we wait and see what is going to do usualy i always put a free to air channel and then switch on stand by

  • solo2 problem help please

    i have a problem when i leave my solo2 on stand by to keep cs running to others the emu ccam after aproxx few hours it switched off the ccam i have always to restard the ccam is there any solution? i just tried several images as BH the 211 and even zebradem image and its the same moreover problem is when i do image in flash and even on meoboot in a udb stick



    i never had this peoblem before

  • installing clines

    Quote from satline

    HI all
    can anyone help with installing clines if this is possible


    Thanks



    How to make your own cccam server



    Go here and make your self a no.ip acount "www.no-ip.com or http://www.dyndns.com"
    after open a Port as you wish in the router
    write your info as you did by "no-ip webadress" on Inadyn by dreambox or server.
    xp:you chose allaf1.no-ip.org as Host and you open Port 12000 so you C:line to all friends you want to share with them will be like this:
    C: allaf1.no-ip.org 12000 username password +(no yes or like this)
    1.
    C: allaf1.no-ip.org 12000 username password no { 0:0:2 }
    means that you friend can get your both Hops 1 & 2 and no right to share it with anyone else
    by your CCcam.cfg you have to make "F-line" like this:
    F: username password 2 0 0 { 0:0:1 }
    2-
    if you want that your friend get the right to reshare your Cards the F:line have to be like this:
    F: username password 2 0 0 { 0:0:2 } / F: username password 3 0 0 { 0:0:2 }
    this means your friend will reshare you Hop 1&2 /all 3 hops together with a nother friend
    F: username password 2 0 0 { 0:0:3 } / F: username password 3 0 0 { 0:0:3 }
    this means your friend will reshare you Hop 1&2 with tow other friends of him /all 3 hops together with tow other friends of him.
    and you C:line to him will be like this:
    C: allaf1.no-ip.org 12000 username password { 0:0:2 }
    C: allaf1.no-ip.org 12000 username password { 0:0:3 }
    you want that you friend use your Cards only by him and you get his Host"C:line"
    your C:line to him have to be like this:
    C: allaf1.no-ip.org 12000 username password yes
    and the F:line by you should be like this:
    F: username password { } { } { } friend_dns.noip.com
    F: username password 2 1 1 { } { } { } friend_dns.noip.com
    (1 1 ) means the friend can user your Emu-Keys too.
    (0 0) means he can use only share cards.
    F: username password 3 1 1 { } { } { } friend_dns.noip.com
    this mean he can get all what you have only for him no reshare at all.
    F: username password 2 0 0 { 0:0:1 } hier you give him intil hop 2 (1 + 2 )
    F: username password 3 0 0 { 0:0:1 } hier you give him intil hop 3 (1 + 2 + 3)


    CCcam.cfg ---> /var/etc -----> Configuration file, where we set the Clients and Friends and additional configuration.


    CCcam.bin ---> /var/bin -----> This is the binary file ( like the .exe in windows ) This file should have 755 permission. (Right click in this file with your preferred FTP client and click set attributes). Otherwise CCcam will not start


    CCcam.prio ---> /var/etc -----> This file is where you can set your priority cards or ignore any cards ( not necessarily needed to run CCcam )


    CCcam.channelinfo ---> /var/etc -----> In this file you can put the channel info for the web interface, so you will see which channel is decoding CCcam instead of seeing the sid ( not necessarily needed to run CCcam )


    CCcam.providers ---> /var/etc -----> In this file you can put the provider info for the web interface, so you will see which package is decoding CCcam instead of seeing the caid ( not necessarily needed to run CCcam )


    SoftCam.Key ---> /var/keys -----> In this file you will find keys to open channel trough keys instead trough network ( not necessarily needed to run CCcam )


    AutoRoll.Key ---> /var/keys ----> this file will have the next key the provider will have and will use the next automatically ( not necessarily needed to run CCcam )


    constant.cw ---> /var/keys ----> In this file you will find constant keys to open channel trough keys instead trough network ( not necessarily needed to run CCcam )


    i hope i did explain it well as it should.
    good luck
    this is not my work but i thank originator.

  • How can i make inadyn work with NO-IP service.?

    Here the config like i use:


    INADYN_ON=1
    INADYN_USERNAME=xxxxxx@mail.com
    INADYN_PASSWORD=password
    INADYN_ALIAS=login.zapto.org
    UPDATE_PERIOD=1800000
    LOG_FILE_ON=1
    LOG_NAME=/var/log/inadyn.log
    DYN_SYSTEM_ON=1
    DYN_SYSTEM=default@zapto.org



    unfortunately it's not working here.
    I'm not using the front (actual) no-ip domain, I'm using zapto. which is also no-ip domain.
    really strange tried also with DYN_SYSTEM=default@no-ip.com in dyn system but it's not working.


    ATM I can only update manualy via browser.




    as far as i know
    from the man of inadyn xxx.inatech.eu/inadyn/readme.html


    Code
    '--dyndns_system': [NAME] - optional DYNDNS service type. SHOULD be one of the following:
    -For dyndns.org DNS system:dyndns@dyndns.org OR statdns@dyndns.org OR custom@dyndns.org.
    -For freedns.afraid.org DNS system:default@freedns.afraid.org .
    -For the servcie ofered by zoneedit.com: default@zoneedit.com.
    - For no-ip.com : default@no-ip.com[
    -For generic DNS system: custom@http_svr_basic_auth
    DEFAULT value is intended for default service at dyndns.org: dyndns@dyndns.org




    someone told me to do this


    If you edit your script manualy try this command and then try to rerun the script
    Code:


    dos2unix -u /usr/bin/inadyn_script.sh



    but about what he want to mean with this (dos2unix -u /usr/bin/inadyn_script.sh) via telnet i just past it there but i stuck there i cant understand what he mean


    can some one lead how to do it pl?

  • How install and configure inadyn on VU+DUO

    i just add with other method 2 files in var/bin and edith the nessasary things inadyn sh with flash fxp its is ok


    You will see dyndns client, Install this & reboot then setting it up is as simple as entering your details with the remote. like ten below said

  • cardsharing and update BH image

    if you have ccam file config save that in your pc as a back up then you can update your new image



    Do the following:-


    How to upgrade the BH image via USB
    1-Save the image on the PC (USB version)
    2-Unzip files
    3-Format USB flash drive with the file system FAT,or FAT32
    4-Create on the stick : Directory/vuplus/duo
    5-Copy to the stick the 3 files into Directory/vuplus/duo
    6-Power off VU+ STB
    7-Remove all USB devices from the box
    8-Plug-in the USB Stick into Vu+ Box
    9-Turn on the VU+ STB
    10-Firmware Update will start automatically
    11-Wait for the VFD to display "Finished ... please reboot"
    12-Unplug the USB Stick from the box
    13 Power off the VU+ STB , and restart it again
    14-Wait for Image to Reboot


    Then follow instruction on the TV screen!
    Have Fun w/BHImages

  • How to reformat USB stick ( ext4 ) for Meoboot

    How to reformat USB stick ( ext4 ) for Meoboot


    1 Insert USB Stick Slot upper f'USB after
    2 Click Blue button twice to enter go BH Extra Settings
    3 Choose Format Usb Red Wizard and click button twice.
    4 At the Window to rise seen some info on how to connect the USB Stick
    5 After connecting the USB Stick Red Button click and given more information about what going on and what to do .
    6 Here vu should find the USB Stick
    7 again - click Red Button and start to see some info about your USB Stick .
    8 Now you can select both partitions you need
    9 After you select , be asked what Size you want to have the partitions you want tikkreja
    10 After you select the Size button and click OK to see some info and will start the process by clicking Red Button
    11 Here begins the process of Partitioning and formatting
    12 Now given info about the partitions they've done
    13 then be asked how the partitions will be formatted and have certain options
    14 Here come formatted all the partitions and upon completion click OK
    15 Finally made upon completion Reboot and you can see the partitions on the USB Stick .
    Of course then you must make 16 mount USB Stick


    How do Mount USB Stick in Devices Manager Black Hole


    Click Blue button twice to be go BH Extra Settings and select Devices Manger
    After you select Devices Manager notes that the partitions located on the USB Stick not yet mapped .
    Click Red button
    Now you can select what you want assembles Devices highlighted by making the tal-Up/Down Device by buttons and then by clicking buttons to select how wanted il-Left/Right mounted ( Universe , video , usb , HDD etc ) .. you Choose usb .
    Then click Red button to save the Mount
    Now Reboot to be asked to make ikkrejata the Mount . Once completed , if it is admitted Devices Manager ( twice Blue Button and select Devices Manager ) see the usb stick mounted .


    Activation of Meoboot and installation of Images


    Go on and choose Plugins Meoboot and click Ok
    Select / media / usb and click OK and confirm Yes
    Exit Plugin
    Open carry out a DCC or equivalent and to be f'dal FTP Image format : -
    Isem_tal_Image_vuuno_usb.zip
    Extract miles away this time ie sugar but cast a Zip file format as _usb.zip ) go / media / usb / MbootUpload
    again ' go - enter an Meoboot Plugin
    Click Red Button
    On the first line you see the name of the Image to tfajt
    Sink on Image Name tiems line and moved one to the right with the right arrow and there also be the name of the same Image .
    Copy settings to let it Yes -the new Image
    Click Red Button and start installing the new Image and upon completion of the process even done Reboot it.
    Settings Many find ready because they were copied from Flash Image
    Just want to add some Plugins Cam and some other events.


    Check and see that the pendrive that you are using is compatible with your receiver and plus soon see the best that has ifformatja min before the pc , although when titfagha receiver is still tifformatja ..... now if ever you will use the meoboot , the best that you select to timmepjah the usb pendrive is to select (min Universe , usb , video , HDD etc .... ) always on my mind


    .


    I had two hours and waist chance to experiment a little I am today with meoboot :


    On these images that experienced little to cut the black hole qedghha in flash and it always worked .... I got comfortable and ogghbitni hfana the Open mission continues , with nazardax unless I say they are more than the black hole togghobni , also oghbitni zebradream added to a previous rajta very closely ... it actually seems imfasla ( OpenPli ) , but I found a few mocks the vix image in this image .... I do not know why ( perhaps it may be because I nissetja some settings ... ) but **** open the list on the tv not seen a full example : the word Boomerang start , omerang ..... all seem so ... now **** gate to draw sceernshot to show you on the webinterface on the pc is visible normal question ..... do not know why it just seems so from the other images , as usual settings ghamilthom I do all the same ..


    Go to Menu > Setup > System > Userinterface ( this for itself on the second page) and Position Setup
    Sink on the second line Move Left / Right and run to the right with Remote until arrange as you wish
    On other verses are other settings that can do well if necessary .
    BTW also tried OpenSpa Image ... can install up to seven different Images on Meoboot .




    As you select , and download a throw f'MbootUpload the Image you want to install on Meoboot


    As you select , and download a throw f'MbootUpload the Image you want to install on Meoboot instead stand looking you own Images


    After you have installed and have set the Blackhole Image gol - Flash , also install the attached plugin named enigma2 - plugin - extensions - imagedownloader DGS - oe - 2.0 - vu -all .
    Then enter an in - Plugins Menu and go on the Vu + Plugin called SDG wrapped Downloader and click OK
    From the menu that comes up select the type of image you want to install on Meoboot , OpenPli example and click Ok
    Now select the Model of your Vu + and click OK
    Scroll over the image that you want to install on Meoboot
    Click Yellow Button and click OK on USB Stick and other OK on MBootUpload
    Click Red Button and see who is on the Image you want download a
    Click OK
    Click OK on Start Download and OK on Yes
    Wait be downloaded to your Image
    Now click the Green Button to Image should check that was downloaded and lying go / media / usb / MBootUpload .
    There you see the name of the Image which have chosen , downloaded and go MBootUpload ready to be installed by Meoboot
    Now Exit and go on Meoboot Plugin and install Image as usual .



    sorry for spelling mistakes i just translated for my lang to english with google translater