I can confirm that everything is good with the dish/lnd/cabling.
I have flashed it several times but no joy. The image I am using is by Ramimaher 1.6.6. I have this on another box also and it works fine.
Would you have a better image I could try?
I can confirm that everything is good with the dish/lnd/cabling.
I have flashed it several times but no joy. The image I am using is by Ramimaher 1.6.6. I have this on another box also and it works fine.
Would you have a better image I could try?
I installed both of those without any errors but still not finding anything when I scan.
Hi Guys,
I have a DM800 HD PVR which suddenly stopped working. No channels are appearing when I do an automatic scan.
I presumed it was the tuner which had gone so I purchased a new one (BSBE2-801A) and fitted it. Still no good.
Would anyone have any idea what else it might be?
Bean
Sorry that's what I have. Do the ping and speeds look ok?
What I have done at the moment is everything in my house runs off the fixed wireless broadband and the ubuntu server runs with my landline provider on it's own. This seems to have improved things a bit but still worried about the 7 - 10 in the evening when the landline broadband drops to 1MB
If they could give me a constant 10MB it would be loads but in the evenings it just dies a death.
I have tested the other connection and it gives a ping of 24ms download of 9.73MB and upload of 2.5
It uses a transmitter on the roof and bounces to local masts. Is this satellite broadband?
Hi Guys,
Where we are our broadband is crap. With our landline provider we would have 10MB during the day but come 7 - 10 in the evening I have seen this drop to .9 They are saying maybe if we are lucky this will improve in 12 to 18 months. If we are lucky!!
I have recently also put in a satellite broadband connection constant 10MB, in and was considering running the two side by side thereby hopefully dramatically reducing the risk of freezing. At the times mentioned above we are experiencing some freezing issues which is most annoying.
Has anyone ever set this up using 2 lines? I have another server so I was thinking of setting this one up and connecting it to the satellite broadband connection. I only have one card using an omnikey reader so is it possible to split this to each server using usb splitter?
Maybe this is completely the wrong way to do this so any help or suggestions would be greatly appreciated.
Thanks,
Bean
Hi all,
I am getting the following message in my oscan logs -
***uk [***********] classD3 ins54: status 90 00 = ok but cw=00 tag 0F: 00 00 20 00 00 00, please report to the developers with decrypted ins54
Any ideas?
Bean
The error shows when I find a good link and I am outside the UK. Gstreamer decoder not available.
Hi guys,
I have installed Tsmedia on my DM800HD SE which seems to install correctly. When I go to icefilms for example and try to play a movie it gives me a error that gstreamer is not available.
Do I need to install this separately and if so where can I find it?
Bean
Got it sorted.
Can I close this thread please?
Thanks
Hi guys,
I have purchased the above but this one comes with wifi built in. Comes with a connection on the back and a little antenna and all.
In network settings it asks me if I wan to use WLAN or LAN. LAN is working fine but no matter how I try I can't get the WLAN to work.
WLAN Connection
r8712u Wireless Network Interface
Anybody have any experience with these that could help me out?
Bean
Do you have 2 trusted boxes you could use?
If so put the F: line like this -
F: friend1 pass1
F: friend2 pass2
Nothing else added to the line.
It is writing the EMM's for me now. The number changes from either 1 to 2 but in oscam I don't see any of the dates changing for entitlements. Should these dates be changing as we go along?
Edit - UQ has now changed to 4
Whoop! Whoop!!
I have written
UK / G / S / UQ
0 / 0 / 0 / 1
Thanks all for your patience and help.
P.s Will this increase to my no. of entitlements?
Didn't see the message, sorry about that!!
I will try the suggestions and keep you posted. Are some of the later oscam versions working correctly? Does anybody have any experience with the latest one?
I'm running similar setup with oscam version 9548 and updates ok.
Probably need to post configs for a clearer picture.
oscam.user
[account]
user = xxxxxx
pwd = xxxxxxxxxx
caid = 0963
au = ***uk
group = 1
oscam.server
[reader]
label = ***uk
protocol = pcsc
device = 0
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
oscam.conf
[global]
logfile = /var/log/oscam.log
nice = -1
preferlocalcards = 1
[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
keepalive = 1
[webif]
httpport = 16002
httpuser = xxxxxx
httppwd = xxxxxxxxxx
httprefresh = 30
httpshowpicons = 1
httpallowed = 0.0.0.0-255.255.255.255
cccam.cfg
SERVER LISTEN PORT : XXXXX
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :xxxxxx
WEBINFO PASSWORD :xxxxxxxxxx
TELNETINFO USERNAME :xxxxxx
TELNETINFO PASSWORD :xxxxxxxxxx
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :xxxxxx
OSD PASSWORD :xxxxxxxxxx
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0 XX XX XX XX
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 10001 xxxxxx xxxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: friend1 pass1 1 0 0 { 0:0:1 } # Remote user 1
F: friend2 pass2 1 0 0 { 0:0:1 } # Remote user 2
F: friend3 pass3 1 0 0 { 0:0:1 } # Remote user 3
F: friend4 pass4 1 0 0 { 0:0:1 } # Remote user 4
I hope this gives a better view of my setup. All friends are remote clients. Is that the correct lingo?
Bean
I have an ubuntu server running cccam 2.1.3 and oscam r9784. The server has an omnikey card reader attached with a 0963 card. The server is standalone and all boxes are clients if that makes sense?
I have read somewhere that this setup might not work with standard settings, how true is this?
If you need any further information just let me know.
What oscam version are you running?
I am back again with this question. I thought I had it sorted the last time but after inserting my *** card back into my paired Thompson box it updated some entitlements but not others and after a couple of days all went.
Can someone tell what version of oscam will definitely work and maybe send me a working build?
Thanks in advance.
Bean
Hi MasterG
Can I close this thread please as the original question has been answered.
Thanks,
Bean
As per the original thread I was having issues trying to get a cccam cline to work in the cccam setup on the ***box f5s. The box would only let me use mgcamd and try as much as I could I could not get it to work. The issue I was having was related to the image on the box so I updated the image to the one in the following thread - Firmware Slybox F3s/F5s-22/01/2014 Many thanks to drfox for the image.
I then added an fline to my cccam.cfg on my server and a cline to the ***box.
Hope this helps someone out. If anybody has any questions give me a shout.
Bean