Hi,
Just to confirm if I want to give my brother a connection I put the following in CCcam.cfg on the server - F: XXX XXXXXXXX 2 0 0 { 0:0:2 }
And on his box - C: XXXXXXXXXXX.dyndns.org 51230 XXX XXXXXXXX
Is this correct?
Hi,
Just to confirm if I want to give my brother a connection I put the following in CCcam.cfg on the server - F: XXX XXXXXXXX 2 0 0 { 0:0:2 }
And on his box - C: XXXXXXXXXXX.dyndns.org 51230 XXX XXXXXXXX
Is this correct?
Got it!!
I changed the N: line to -
N: xxxxxxxxxxx.dyndns.org 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
This user and password are the user and password I have in dyndns.com account.
I also created this user/password in oscam
Thanks a million for your patience and all your help. I will most likely have a few more questions in the future if you don't mind?
Thanks,
Bean
The N line is as follows -
N: 127.0.0.1 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
My F line is as follows -
F: user pass 2 0 0 { 0:0:2 } (user/pass correspond to the C line on the box)
I have changed the user and password to my own and changed it in all oscam files with a user/password
Bean
Hi,
If I insert the card directly into my dreambox it works fine. I don't have all the premium channels on this card yet but have some. Does this mean the card is ok?
Where can I get you a log and I will post it?
Bean
Hi,
This is an external client. I have the server set up in my office on a separate broadband line to my house so I presume this would be an external link?
Bean
Hi,
Sorry for the delay responding.
I now have an active client showing and client and have the following in the CCcam.cfg on my box but it does not seem to be picking anything up -
C: xxxxxxxxxxxx.dyndns.org XXXXX user pass
I am using the blackhole image and when you select a channel if you press ok twice you can normally see the cline details on the bottom of the screen but it is not showing anything.
In oscam I have server and http - OK
Client is showing green and - OK
Readers is showing a cream colour and the following - r 1 ***uk ON OFF 127.0.0.1 0 pcsc 02.04.14 09:41:35 00:06:17 0000:0000 no data 00:06:17 CARDOK (10 entitlements)
I think we are really close to having it going.
Thanks,
Bean
Hi,
I think I am finally getting somewhere. I have 1 connected client now as we speak. Should I also have an active client? Don't have at the moment.
Bean
Hi,
Apologies I gave you the wrong oscam.log details -
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Apr 1 17:16:22 2014
-------------------------------------------------------------------------------
2014/04/01 17:16:22 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8917 (x86_64-linux-gnu-libusb-pcsc)
2014/04/01 17:16:22 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6522
2014/04/01 17:16:22 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8917 (x86_64-linux-gnu-libusb-pcsc)
2014/04/01 17:16:22 0 s services reloaded: 0 services freed, 25 services loaded, rejected 0
2014/04/01 17:16:22 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/04/01 17:16:22 0 s signal handling initialized
2014/04/01 17:16:22 0 s 887 service-id's loaded in 2ms
2014/04/01 17:16:22 0 s newcamd: initialized (fd=5, port=10001)
2014/04/01 17:16:22 0 s -> CAID: 0963 PROVID: 000000
2014/04/01 17:16:22 0 s ***uk [pcsc] creating thread for device 0
2014/04/01 17:16:22 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/01 17:16:22 0 s waiting for local card init
2014/04/01 17:16:22 8C0008C0 h webif: decompressed 53612 bytes back into 154024 bytes
2014/04/01 17:16:22 8C0008C0 h HTTP Server running. ip=0.0.0.0 port=16002
2014/04/01 17:16:22 2506690 r ***uk [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2014/04/01 17:16:24 0 s init for all local cards done
2014/04/01 17:16:24 0 s anti cascading disabled
2014/04/01 17:22:10 2539960 c client connected to 10001 port
2014/04/01 17:22:10 2539960 c encrypted newcamd:10001-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2014/04/01 17:22:10 2539960 c user linuxsat authenticated successfully (CCcam)
2014/04/01 17:22:10 2539960 c AU disabled for user linuxsat
2014/04/01 17:23:18 2506690 r ***uk [pcsc] PCSC was opened with handle: 70219
2014/04/01 17:23:18 2506690 r ***uk [pcsc] card detected
2014/04/01 17:23:18 2506690 r ***uk [pcsc] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/04/01 17:23:19 2506690 r ***uk [pcsc] Card type: SYBV
2014/04/01 17:23:19 2506690 r ***uk [pcsc] Rom version: 40LF
2014/04/01 17:23:19 2506690 r ***uk [pcsc] parental lock setting: FF FF FF 00
2014/04/01 17:23:19 2506690 r ***uk [pcsc] type: ********** B***B (0963), caid: 0963
2014/04/01 17:23:19 2506690 r ***uk [pcsc] serial: ########, BoxID: ########, baseyear: 1997
2014/04/01 17:23:19 2506690 r ***uk [pcsc] ready for requests
2014/04/01 17:23:19 2506690 r ***uk [pcsc] found card system ***********
2014/04/01 17:23:19 2506690 r ***uk [***********] card detected
2014/04/01 17:23:19 2506690 r ***uk [***********] type: ********** B***B (0963)
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: 0003, expiry date: 2014/05/17-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: 000b, expiry date: 2014/05/17-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: 001d, expiry date: 2014/05/17-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b765, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b766, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b772, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b773, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b846, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:20 2506690 r ***uk [***********] tier: b860, expiry date: 2014/05/12-01:00:00
2014/04/01 17:23:52 2539960 c linuxsat disconnected from 127.0.0.1
2014/04/01 17:23:52 253B7B0 c client connected to 10001 port
2014/04/01 17:23:52 253B7B0 c encrypted newcamd:10001-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2014/04/01 17:23:52 253B7B0 c user linuxsat authenticated successfully (CCcam)
2014/04/01 17:23:52 253B7B0 c AU enabled for user linuxsat on reader ***uk
2014/04/01 17:23:52 253D600 c client connected to 10001 port
2014/04/01 17:23:52 253D600 c encrypted newcamd:10001-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2014/04/01 17:23:52 253D600 c user linuxsat authenticated successfully (CCcam)
2014/04/01 17:23:52 253D600 c AU enabled for user linuxsat on reader ***uk
Display More
Display MoreWhen testing an internal share on your own network use the ip address of the server, not the hostname. ( C: 192.168.1.88 10000 user pass )
I have a separate broadband line into my office in my house from where the server is located so they are both on different lines. Should the cline for this include the hostname or my public IP in my office? I presume the hostname?
Yes, put the dynamic hostname details in your router or use the dyndns updater client..
This is what I have set up in Dyndns - xxxxxxxxxxxxx.dyndns.org Host XX.XX.XX.XX (Public IP in office - Server)
Open a port in the router assigned to the ip address of the server (the port to open is SERVER LISTEN PORT in CCcam.cfg).. Do not use 10000, use something less obvious to a hacker, like 54672..
I have changed the listen port as you suggested in CCcam.cfg and also on the router. Just to confirm I have the new port assigned to the internal IP of the server as follows - Dreambox[TCP/XXXXX~XXXXX] XX.X.X.102 Enabled
Use the attached configs, then show us another oscam log..
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Apr 1 17:24:20 2014
-------------------------------------------------------------------------------
2014/04/01 17:24:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:24:20 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8917 (x86_64-linux-gnu-libusb-pcsc)
2014/04/01 17:25:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:25:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:26:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:26:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:27:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:27:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:28:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:28:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:29:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:29:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:30:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:30:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:31:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:31:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:32:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:32:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:33:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:33:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
2014/04/01 17:34:20 FB49D0 r ***uk [mouse] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 17:34:20 FB49D0 r ***uk [mouse] Cannot open device: /dev/sci0
Just to confirm -
[newcamd]
port = 10001@0963:000000
I have also opened port 10001 or should this be something else?
/etc/tuxbox/config/tpl - This path does not exist. Might it be somewhere else in Ubuntu?
Thanks,
Bean
Hi,
I will start this by stating I am a complete novice at this but I have managed to get a good bit done (I think!).
I have an old desktop which I have installed Ubuntu on and also CCcam/Oscam. I have a **y white card connected with an omnikey 3021 and when I run webif it shows the card, my shares and servers but nothing in clients. I have created a Dyndns hostname and have added this to my box in our living room with the following cline -
C: xxxxxxxxxx.dyndns.org 10000 user pass
Is there a way of checking that the box is connecting to the Dyndns address?
The following is my CCcam.cfg file -
#####################
#CCcam.cfg settings #
#####################
SERVER LISTEN PORT : 10000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : user
WEBINFO PASSWORD : pass
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : dreambox
ZAP OSD TIME : 1
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0
SHOW TIMING : yes
MINI OSD : no
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : yes
EXTRA EMM LEVEL : no
EMM THREADS : 1
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
MINIMUM DOWNHOPS: 0
MINIMUM CLIENT VERSION : 2.1.3
#LOG WARNINGS : /tmp/warnings.txt
###############clients###############
N: xxxxxxxxxxx.dyndns.org 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: user pass
Display More
I have a public IP which I have linked to my hostname in Dyndns, is this correct? I have port 10000 assigned to my server for these requests. Do I tell it in Dyndns somewhere to go to this port? If so where? The port is in the cline on my dreambox so is this how it gets passed to Dyndns?
I have been at this with nearly a week and I am completely confused so if anybody could please take the time to help me I would greatly appreciate it.
Also when I try to load the oscam webif it tells me 403 Forbidden - Access Denied
These are the errors I am getting in oscam.log -
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Apr 1 16:05:11 2014
-------------------------------------------------------------------------------
2014/04/01 16:05:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:05:11 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8917 (x86_64-linux-gnu-libusb-pcsc)
2014/04/01 16:06:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:06:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:07:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:07:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:08:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:08:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:09:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:09:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:10:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:10:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
2014/04/01 16:11:11 B671A0 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2014/04/01 16:11:11 B671A0 r ***uk [internal] Cannot open device: /dev/sci0
Display More
As I said any help would be greatly appreciated.
Thanks,
Bean
I tried to flash my dm800hd pvr clone with the latest image above and it flashes no problem but won't reboot. Is this the wrong image or is there a newer image better suited for this box? The 1-6-6 image work fine.