Posts by Mee®kat

Quote from stevejo

come on peeps use the grey matter

I am well aware of grey areas stevejo....using a bit of savvy so to speak but this is daviddawns account and card so its good to see if a member is willing to put in a shift and help themselves out sometimes.

Quote from daviddawn

hi guys im back! ok so i got them to send me a new card out, telling them my kid took it out and couldn't find it anywhere, last time i received the card, i put it straight into omnikey reader and oscam read entitlements, however now it says i have none CARDOK (no entitlements)

any ideas ???

Sly always sent replacement cards out pre-activated but things have changed as i can see you must now realise so as said by mckee25 your card will require activating by the looks of it..as long as you have not changed anything from when you were trying to update your last card then its just a case of waiting for your entitlements/emm to arrive.

My advice would be to open global emms and restart your server to ensure your card is receiving emms/then close globals and wait patiently!Worst case scenario is binning your amstrad and obtaining a specific thomson hd box!

Also i do not think resetting the pin with slys online service is a good idea as you could end up in some soapy poodoo again but its upto yourself.

MK

Quote from aramaram

sir i mean clients connect to server

how many clients can load best cccam?? for example 200 users online or 300 users onlines...

i use debian6
and
dedcated server

Hahaha 300 users yes no problem. CCcam 2.0.11 was mostly used by payservers in the past due to its stability and ease of ripping peers cards..

I think you are on the wrong website dude.

Quote from stevejo

Dont panic and start doing the pin , it doesnt work now

Its also a surefire way of hardware pairing your card.

Quote from aScottishBloke

looking at getting one of these ***link cards but dose anyone know if it will work in the gigablue quad?? will i need just the card or both cam and card??

This particular card/caid has known problems and like most i***** official cards its becoming a complete mare so i would avoid this card in your situation as you wont be able to share it while its sitting in a cam or in 3rd party equipment while i***** are implementing anti-cs measures at this time!

I have an 0D03 ***link basic service pack card working fine but you would need hardware and knowledge of how to do that.

Probably best you look at other cards to be ohnest.

MK

I think you mean killer ecms! There is no known killer ecms in the stream for 0963 as yet. If you are really worried about certain unique emms possibly pairing your card then you can block and save unique emms and compare them to previous emms wriiten or saved and write the emms yourself if they look safe..something like this below but unique only open is ok at this time.

blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

You can also block emm type shared permanently as its not required.

MK

Quote from scud

why use whitelist at all if its not needed.

Well first you have to understand why you used an ecm list in the first place? like many others i assume you just used a list that was plastered on the net for all sids which is a completely pointless exercise.

Because you do not understand how it works or why it is important to configure a list specifically for your package(if you use one) then it is pointless for anyone to try and explain or reply to your question because you wont understand why its pointless using one in the first place:(

MK

Quote from scud

hi there ten when u say u stoped useing whitelist do you just leave whitelist box empty in oscam reader.

I,m not ten of course and neither is the Moderator who made that post but i think i can speak for both of them... yes they would have left the ecm whitelist field completely empty..dont try and hash it out as you will only end up corrupting your reader setup.

You can back up your configs or the list itself if you feel the need.

MK

Which version are you using? Its not a plugin i use often however i was in a friends house earlier and they were asking if it still worked so after having a look i noticed there was an update available for 4.8..just tried it on my own box and i have World War Z working from 1 channel movies at the moment.

MK

Quote from budd131

i thought without my card my be closed if they hit it i thought whitelist would keep it safe

An ecm whitelist will not as you say keep your card safe because all it does is prevent unwanted requests for some channels that your card does not open! in any case as i have stated earlier whats the point anyway as you seem to be willing to use one thats plastered on the net or from a user who will no doubt have a different package to you so your card will either not open certain channels or it will still receive these unwanted requests.

If you still want to use an ecm list for 0963 or any nds card for that matter then you are best to configure an ecm header whitelist specific for your package but i can see thats not going to happen in your case so you are best to leave any type of ecm list out.

MK

The freezing issues you are experiencing is not caused by an ecm whitelist..if it was a problem with your list then the channels would simply not open period!

I suggest you completely remove your ecm whitelist anyway as it pointless using one unless you have configured it to meet whatever subscription you have.

MK

Quote from andy ray

Looking at some of his previous posts online my paydar is starting to twitch a little but then i could be wrong lol

http://geosharing.info/forum/f…ke-ccam-sever-157616.html

The post on that website is from over a year ago and looking at this thread the member has not learned much at all in the intervening time.

This member does not even have the ability to differentiate between server protocols so its yet another one of the many that should not be tampering with such software/and or hardware in the first place regardless of an expiry date finding its way onto a user account.

MK

Edit just tested these channels and they are in fact paired unfortunately.

I dont think bt sports and espn are included in slys hw pairing are they?

Sounds like server configuration problems to me.

MK

Why have you all of a sudden replied to this post which is 7 months old? bit bored are we larry and decided to pick some bones lolz

Quote from daviddawn

it may be worth giving it ago, is it likely going to be a new card different from the white one?

cheers

Give what a go! lolz mate stick your card in the official receiver to avoid sending yourself stir crazy//if its clearing hd content in that then you will know//if your card was clearing premium channels for 2 months and then suddenly stopped clearing these channels when you took the card out and sent all your info back to sLy to update your card then it only says one thing(HW PAIRED)

You will also recieve a new white 0963 card same as all other cards as their is no new card change on the horizon/how and what are you going to say to sly to convince them to send a new card and what are you going to do with it.

MK

Quote from morouvif

hi Mee®kat
Your link i load it.
But it dosn't work and it get this small usb port on the back

The software in the link does work! i would not have uploaded the software if it did not fix the no ca error...no ca error i fixed using this so either you have hardware issues or you have not used this software properly.

Well your configs look ok although its not how i would configure them but you should still be able to view channels if the card is not hw paired//an easy test is your official box and if they clear in that your snookered with that particular box.

Quote from daviddawn

i copied and pasted it before i deleted it.

Erm! okay dokey.

This card you are trying to update! is it the same card that you had bother with the 2nd time around and used slys online service? if so i reckon you can kiss that card goodbye with the box its paired to.

Quote from daviddawn

Hey Meerkat, what do i think? i think this info is not sensitive and has been shown many times publicly on forums as its the default example of a remote connection when installing oscam, i dont even have a remote connection to a reader, i just copied and pasted what was in my oscam.server file, i will try what you advised including the ident in my reader, i was advised to use dvbapi because it had worked for others recently however after 5 days i have had 55 unique emms written and 41 unique emms skipped, with over 5200 ecms leaving on a paid channel, but still nothing.

thanks again mate.

Whats the point in the reader being there then?

Quote from daviddawn

[reader]
label = remote
protocol = cccam
device = peers.dyndns.org,12000
account = user,pass
group = 1
caid = 0963
cccversion = 2.1.4
reconnecttimeout = 5

Display More

This is the 2nd time you have posted this dyndns now which is sensitive information and is not required here/port also lolz

peers.dyndns.org = output below,and i doubt your peer will want this info showing on a public forum...what do you think? so ask for it to be removed from both of our posts.

IP address [?]: 151.230.107.50 [Whois] [Reverse IP]
IP country code: GB
IP address country: ip address flag United Kingdom
IP address state: n/a
IP address city: n/a
IP address latitude: 51.5000
IP address longitude: -0.1300
ISP of this IP [?]: *** Broadband
Organization: *** Broadband
Host of this IP: [?]: 97e66b32.***broadband.com [Whois] [Trace]

Also change this reader to group2 and try

[reader]
label = remote
protocol = cccam
device = xxxxxxxxxxxxxxxxxxxxxxxx
account = user,pass
group = 2
caid = 0963
cccversion = 2.1.4
reconnecttimeout = 5

Quote from daviddawn

hey mate, ye i checked and it shows in reader 15 unique emms have been written but 8 unique emms have been skipped which is strange, also got this coming up in status:

2013/12/07 13:55:24 596EF8 c dvbapi: try pids again #2
2013/12/07 13:55:24 596EF8 c user800 (0960&000000/0000/0F3C/67:5A0E): rejected caid (120 ms) (0/0/0/0) - 0960:0F3C unknown (invalid caid 960)
2013/12/07 13:55:24 596EF8 c user800 (0963&000000/0000/0F3C/67:5A0E): not found (122 ms) by remote (0/0/2/2) - 0963:0F3C unknown
2013/12/07 13:55:24 596EF8 c user800 (0961&000000/0000/0F3C/67:5A0E): rejected caid (120 ms) (0/0/0/0) - 0961:0F3C unknown (invalid caid 961)

thanks mate.

1 unique emm should be enough to update your card matey and caids 0960 and 0961 are obsolete so i,m not sure why you are seeing that..

Add ident to this reader below
[reader]
label = ***UK
protocol = internal
detect = cd
device = /dev/sci0
caid = 0963
ident = 0963:000000
emmcache = 1,1,0
group = 1

There is also no need for dvapi with your card but if you have been advised to use this then fire away.

MK