Are you not spinning around enough after last nights heartbreak...al take your bootlogo if you edit one as i dont have the time for that
Posts by Mee®kat
-
-
Your card has obviously been paired to slys new pairing method....why on earth did you do this:lala:
It has been well documented here and elsewhere not to do that!!!
-
put my cline into my solo2 on open atv image but only gettin fta channels?
Well things have certainly moved on> what happened to var/etc/cccam.cfg for a cline?
MK
-
Nahh that's not true. All willl happen is the receiver wont boot and will require a reflash
What you should do pheonix is read the thread via a computer rather than your super duper Gt mobile because you will find that what i have stated is actually true in certain cases!!!
Since we are talking clones pheonix then you should be able to see that some people have actually bricked v1 and possibly v2 chip vu boxes using original images...I gave the member here the benefit of the doubt because we were all none the wiser at the time whether this box was actually a clone or an original receiver.. anyway it appears its now a v3.2 chip on this solo so original images should work on it and if they dont then a reflash should sort it...you also have to be aware v3.2 chip boxes should have a v3 chip installed but this does not mean they have the v3.2 update as claimed....this can be done via serial of course...i assume you dont use clone vu boxes like myself but i do research problems whichever box that may be!!!
@Admin/staff I appreciate and agree that clones should and must not be supported here because its not fair for everyone including the forum supporter due to excess problems that can occur.
Loading the wrong bootloader or a image intended for a different model is another matter entirely.
Who even said this!!!!again maybe that phone is playing tricks on you!!!MK
-
Hello, i have wait the card for 3 hours in the original box and nothing. I think that i keep it into the DM500HD 6 days after i need to update the entitlements. Now i have only 1 entitlements in OSCam, but before i had 12-13
Regards
Its not advisable to update italia cards in 3rd party receivers unless you know what your doing as you WILL more than likely (burn your card) meaning errore 999? depending on caid used with oscam..what caid is your card btw..i assume 09CD?
Anyway i would definately take nano,s advice and leave it in the original receiver to re-activate!! 093B and 09CD cards used to update entitlements in an hour with the original pace HD italia box i used but i never allowed my italia card to run out so you should really start paying attention to your card/s and make sure this does not happen!
I would also not try to contact your supplier to request a refresh signal from italia as it will sound a few alarm bells i would say!
Another thing you could try tho is a software update on the receiver itself as it may speed up the cards re-activation process...cant remember what button it was on my box but its practically the same as a manual software update method on slyuk boxes.
MK
-
Sattv5 updates...:)
-
You are best to find out whether this box is in fact genuine or if its a clone because you could damage the box flashing original images on clones ... Have a search on google and compare what your box looks like with the lid off!!
MK
-
Display More
Hello, i have *** Italia in OSCam on DM500HD, and i think i forgot to put the card in original *** box before expiration. Now when i insert the card in original box i got this message:
"AVVISO Numero 07
Riconoscimento della Smart Card in corso, si prega di attendere SC: xxxx xxx xxxx, STB_ID: xxx xxx xxxx x"Can i fix the card or its burned?
Regards
Dont think its been burned mate as that would be errore 9994/9995 etc
"NOTICE No. 07
Recognition of the Smart Card in progress, please wait====This is what its saying to you above so wait... italia cards from memory usually update in an hour but thats cards that have not had entitlements run out.
MK
-
thanks for clearing that up citizian, i do believe people in the uk who have family and friends in southern ireland, have the card registered to their address but view the channels from within the uk? not sure why they are receiving all 5 channels compared to just the 3 fom bt and at a better price, are you sure they offer in hd aswell as this is not mentioned on their website.
Setanta Ireland is not in hd like other optional pay channels/boxnation/racing uk are also the same with no hd although Btsports and Espn have HD options.
Setanta can also charge what they like and if they offer a similar price to bt with extra channels then thats up to them although bt are doing thier own offers like completely free channels with hd for a year if you subscribe to bt broadband.
I think the free HD ran out end of july if you have bt broadband tho.
And yes a registered setanta card from Ireland will work not only in ireland or the british isles but wherever your dish can pick up the beam for setanta channels!
MK
-
its says my hostname is mydns.no-ip.biz
Not a good idea to post your dyndns on an open forum mate...i would have that removed pronto if i was you.
-
Hi i tried to reflash a VU+ solo hd but it seemed to take ages like 30 minutes so powered it off removed the usb stick and now the box fails to boot !
i have tried flashing through serial and network but get a error is there anything else i can try p.s i was using a serial 2 usb adaptor when trying via serial.
How bricked is the box? What image did you try to flash to the box?..i would lay off serial programming attempts just now until you figure out what might have went wrong with your flash!
MK
-
I never knew about this, but if it is the case it would also explain LB Blocking the SID, you might have to add it to LB Whitelist to prevent this happening agin j0nesy
It is a subscription issue(this was the case a few months ago) so i dont think anything can be adjusted in oscam for this although i dont watch gaa also
jonsey if your issue is still the same? then its nothing to do with what i was talking about regarding sub issues which i thought could have been the case due to us not knowing when this log had been copied...as thatfellow says try dvapi...its not what i use but if setup correctly it works well.Also what method have you been using to update your card in the past anyway.
MK
-
Definately a strange one this as i have never had any bother with setanta or 0963 for that matter but as thatfellow says a new emm might freshen the card up and bring it back to life.
This log tho mate was this copied from the server recently or was it when the problem occurred a week ago because i will tell you what it also looks like..for instance if a live gaa event(irish football) is being broadcasted and you DO NOT subscribe to premier sports then setanta will show the not subscribed message in the oscam log with the end result of a black screen during the match.
I,m not sure if its still happening with certain events like gaa but this was certainly the case a few months ago anyway.
MK
-
I have had to do the same with cacheex..I made this list and i ended up blocking everything i now only have on 0963 which is not much// so the cards i have are at least doing some work while sitting there.
C7A7,C7A8,C7A9,D809,0F01,C5F8,C4CC,C5E5,C4BE,C5EA,C4C8,C5E4,C4BD,C5E9,C4C7,C7AD,C7AF,D435,0F12,CB25,2F03,2F08,2EE0,CC01,C495
These block boxnation/premier sports/setanta/bt sports/sd/hd/espn/sd/hd and all freeview channels like 5HD and sony tv etc.
MK
-
Try deleting your readers and swapping your device order around...ie first reader slyuk device 0 group1/ 2nd reader sct device 1 group2
I would also block shared on your slycard but that is not your issue here.
MK
-
Tspanel does not appear to be compatible with dream-elite images so its best to use open pli...although i dont own a dreambox which i assume you own begood then open pli seems to be the most stable and much better if you are using any stream related plugins.
-
(havent even set it to share to second box upstairs lol)
Confused.com?
What are you trying to do...if you are trying to share your card to an internal box and having isuues then unless you post your configuration files everyone could spend weeks trying to figure out why you are having problems!!!
-
Hi,
Will it work with S16?
Rgds
As sattv5 says try this mate.
He has generously uploaded a file for you also...MK
Quote from sattv5The lists won't work on the Openbox s16 because it's a different format, but what I have done is created one for the s16 for him.
It should work properly but I have no way of testing it myself. Let me know how he gets on with it and if it's ok I will create him one each time I do my updates -
I wouldn't recommend CCCam for an 09CD card either, but we are not talking about 5ky Italia, we are talking about 5ky UK, and yes i do have a 5ky Italia card also so i know what i am talking about.
Everyone knows that you only update a 5ky Italia card in the 5ky Italia receiver, thats old news.
So your saying you would recommend cccam for 0963? I strongly disagree but we all have our opinions dont we!afaik cccam had difficulties with the disassembly of slys latest ecm lengths with an end result of lost channels but i scrapped cccam years ago so i,m not 100% sure on that.
this is when all i have been reading is that people are having issues with OSCam to update their card.Well!!! Reading peoples issues is one thing but experiencing the issue yourself is a different matter entirely dont you think!! I can tell you now there is no issues updating 0963 cards via oscam if setup correctly as i have previously stated/////anyone experiencing dificulties updating 0963 cards via oscam is definately user error related!!!!
If 5ky want to kill your card they could do quite easily regardless of what emu you are using. Do you not think that NDS share their methods with each of their suppliers? 5ky have already killed off a load of UK cards a few years back, if they can do it once they can do it again regardless of what emu you use. 5ky Italia have also managed to kill cards under OSCam even with the emm blockers all on.
I think you are definately getting the wrong end of the stick here nano...i am well aware of what nds are capable of but i,m afraid it seems you are unaware of what is happening with your card/s.093B/09CD cards have been wiped out in the past with an unknown ecm...prepay cards mostly......
Also when nds killed off 0963 cards a few years back it was nothing to do with what cam/software was being used or what emms were being blocked/recieved for that matter...it was basically a purge by nds at that time and they used an anti-cs method known as fingerprinting technology so do yourself a favor and look into that!(hint) Card serial!!!!
What i am saying is that CCCam updates these cards fine straight out of the box. If they kill my card i'll just order another one, its hardly rocket science is it.
Nano
Nope your correct its not rocket science is it and i have never said cccam will kill cards but what are you going to do nano if you ever did require a new 0963 card for various reasons...get a receiver that does not accept slys latest firmware with a new package and clutch some straws?
Sly 0963 are due a new transition of cards anyway so all the blowhards will have to explain(server off)and they have simply copied and pasted configs from a forum onto a default server pmsl...
MK
-
Why do people feel the need to use OSCam when CCCam will quite happily update the card.
Nano i appreciate your card has been fine in cccam for this length of time but oscam updates 0963 cards for fun if your server and cam are both setup correctly and i would imagine people feel the need to use oscam as they already have a card running in such software.And its not just about what software is used to read your card its about your choice of cam and the setup of this also to update the said card!
I certainly would not recommend this to anyone to use cccam as a reader or an update method of nds cards...specifically 09CD/0963 cards because unless you have done some tomfoolery with whatever cccam version you mean then who knows what emm is being passed to your cards...rom updates/corrupted emms/ecms who knows because cccam is unsupported now.
MK
