...solved by installing "Pineas".
Many thanks to the author of this plugin.
Posts by rcc_pt
-
-
Is there a solution without having to install a new image?
Does reinstalling autopin not restore the menu?
Yes, it would be a solution to try, but as "gutemine" has been reformed I don't know where to get the latest version of this plugin.
I experimented with the old version "autopin_5.4-r9_all.deb" but it went wrong with green windows and reboots.
-
Got no CI menu after uninstalling autopin plugin from "gutemine".
Is there a solution without having to install a new image?
Thanks.
-
missing nuid and cwpk
Hello, if anyone has and can share this data I would be very grateful.
Regards
-
Tivusat black card stopped working in oscam.
Does anyone have a solution?
Tanks.
-
[webif]
httpport = 8888
httpallowed = 0.0.0.0-255.255.255.0
Yes, it's like you wrote.
-
My black card is working in internal car reader. I always use the descrived metod to acess oscam webif, but today...
-
I get this mesage.
-
Black card is working in my DM920 but I can't access to Oscam WebIf. I don't know why?
-
-
I need black card config. Can you pm me? Thanks
CodeIs there an Oscam version running on your box (?) Image (?) with "Nagra CAK7 (Merlin/Cameleon/Cayman): yes" support?Hi, I have a DM920 running ofical image + Gemini4.1.
I have also anothers boxs, Octagon sf4008 and Gigablue UE 4K. Tanks.
-
I need black card config. Can you pm me? Thanks
-
As I said in my last post, the problem is solved. Tanks.
-
Tank you, tank you, tank you! It's works now!
Just do not understand why with the ET9000 these changes were not necessary.
Greetings to all who helped me in this difficult.
Regards
-
And now log from my ET9000.
-
It was easier than I thought to get the log (DM7020HD).
-
Display More
Open oscam.conf and look for [webif], you will get something like this;
Code[webif] httpport = [COLOR='#FF0000']8888[/COLOR] httpuser = httppwd = httprefresh = 15 httpshowpicons = 1 httpallowed = 192.168.0.0-255.255.255.255In a firefox or chrome browser window type this and press enter http://192.168.1.95:8888 (change 192.168.1.95 to the ip address of your dm7020).. If you are prompted for a user and pass use what is set in [webif].. Show us the live log from oscam webif so we can help solve this.. If the webinterface doesn`t load oscam has not started..
Oscam can be started in telnet, paste these commands into telnet, pressing enter after each line.. Copy any errors you get and paste them here..
Codecd /usr/bin ./oscamI'll try but it will not be easy due to my limited knowledge in this area.
-
Display More
Why? if you are using oscam to read and serve cards then how do you actually know what is going on !.... or is oscam just reading your cards? either way you should be looking at what the oscam webif actually is :) especially if you use the software.
Its best you post your config files anyway even if they do work in a different receiver...however try location etc/tuxbox/config
Install all config files to the config folder and restart.
Yes I have been using OSCAM only to read my two cards (TNT and SmartHD).
I assume I have some difficulties in understanding and working with oscam but my configs have worked well until now and continue to work well in my ET9000.
I'm only using 4 configs and these are:-oscam.conf-
[global]
disablelog = 1
disableuserfile = 1
usrfileflag = 0
maxlogsize = 10
preferlocalcards = 1
saveinithistory = 1
lb_mode = 0
unlock_parental = 1[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1[dvbapi]
enabled = 1
au = 1
user = localuser
request_mode = 0
P: 0500:030B00
P: 0B01:0000-oscam.server-
[reader]
label = Card-TNT
enable = 1
protocol = internal
device = /dev/sci0
fallback = 1
detect = cd
group = 1
emmcache = 1,3,2
audisabled = 0
mhz = 500
aeskeys = 0500@030B00:0,F1DC...................
cardmhz = -1[reader]
label = Card-SMARTHD
enable = 1
protocol = internal
device = /dev/sci1
detect = cd
caid = 0B01
ident = 0B01:0000
group = 1
emmcache = 1,3,2-oscam.user-
[account]
user = localuser
disabled = 0
group = 1
au = 1 #Card-TNT[account]
user = localuser
disabled = 0
group = 1
au = 1 #Card-SMARTHD-oscam.whitelist-
i:0500:030B00:2013:4A8
i:0500:030B00:2027:4A8
w:These configs are working 5 stars, to read my cards (tntsat and smarthd), in my ET9000 with "oscam_1.20-rev-9810-Pli-4.0".
Same configs and same oscam version in my DM7020HD (with Pli4.0 image) do not work. I'll try "location etc/tuxbox/config". -
I do not know about the Webif, I do not use the Webif.
My config files, in Dreambox, are located in "etc/tuxbox/config/oscam".
In my ET9000 the configs are in the same diretory and work fine.
Sorry my nervousness. -
The problems are no ecm info, no picture, no signal of cards detection, nothing at all.
