Got it going again. Took two months! wasn't a matter of just mashing keys!
Posts by NecroticPoop
-
-
Hey folks, how are we all doing.
My 09CD sly it card has been killed in the past couple of days.
Entitlements were good until 28/1/14, but now oscam cannot clear any keys.
Be careful with your cards, could be a nano update there too, will post more details later
when I get it going again. -
tnt is on emu right now... give it a shot.
-
I have a prepaid 09CD card and all of the above channels are blocked in oscam due to card pairing. until there's a suitable countermeasure, more and more channels will go black.
http://www.streamboard.tv/oscam/ticket/3504#comment:5It's a bummer, Sly IT have made a grave error. 0963 will not be far behind, 09cd has to be their testbed to iron out little niggles with their card pairing,
09CD wouldn't have as many of the users 0963 has.Hope somebody can help us with these cards!
-
Haha class!
They changed the nano so that's the old aes key out of business. After that I'm stumped.
When I put it into Softcam.key it doesn't do much, though I do get a message saying free ECM time 0000.When I put the aes key into oscam I don't even get a request to the card, which is odd. The caid hasn't changed... (That's with Softcam.key disabled)
-
Hey folks, anyone have any idea why the new aes key (27/10/13) 25****51 doesn't work in oscam?
my config is the same as the config that worked previously for tnt, except the new aes key obviously.
any tips? -
UPDATE: AES key is no longer valid as of last week.
-
solved. restarted box and emm flew in. thank you :)
yet another problem I'm experiencing now.
2013/10/23 01:18:02 52A778 c lusername (0500&030B00/0B00/25E6/2A:00000000000000000000000000000000): corrupt (0 ms)
any idea why this might be happening? -
hey folks, have had my card in my vu solo2 for the past 3 days,
initially had issues reading the card in the internal reader, but the smargo sorted that out.
I'm getting CARDOK (no entitlements) at the minute, and have the following files:Code
Display Moreoscam.dvbapi P: 0500:030B00 # TNTSAT oscam.server [reader] label = tntsat protocol = smargo device = /dev/ttyUSB0 caid = 0500 detect = cd mhz = 500 ident = 0500:030B00 aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,9A[magical aes key]56 group = 1 saveemm-unknown = 1 saveemm-u = 1 saveemm-s = 1 saveemm-g = 1 lb_weight = 300 auprovid = 05030B emmcache = 1,3,2 oscam.conf [global] logfile = /var/log/oscam.log unlockparental = 1 nice = -1 preferlocalcards = 1 [cccam] port = 10000 nodeid = [xx] blanked version = 2.1.3 [dvbapi] enabled = 1 au = 1 user = user boxtype = dreambox [webif] httpport = 16002 httpuser = xxx httppwd = xxx httprefresh = 15 httpallowed = 127.0.0.1,192.168.0.0-255.255.255.255 oscam.user [account] user = xxx pwd = xxx caid = 0500 au = tntsat group = 1 ident = 0500:030B00It's been days now one the same TF1 channel, but no emm has come through. something wrong with my setup?
-
Hey folks, never got my Fransat 5w card, and am quite persistent on watching french telly.
Do any of you kind folks know the current AES key for oscam for the TNTSat card?
Thank you :) -
Yes, I have heard this already, however, I don't think I'll be buying any more hardware for my set-up. Might see if anyone out there has one of these receivers.
Wonder if there's a software only solution. How about reversing (without sounding ludicrous) Kyng firmware?nano, would a normal viax 3 cam work at all?
-
Hey again, everyone, me again trying to solve more 'out there' stuff.
I recently acquired a Fran$at HD card (0500) and CI+ cam module.I know that enigma2 receivers aren't compatible with CI+ modules. That is fine.
Surely I can do something with the card, however? I know that Viax 4 requires AES keys to be put into oscam reader config.
I put it into oscam earlier, but the card has obviously no entitlements. any way to activate the card through oscam?
Where to now? Don't particularly fancy buying a new dvb-s enabled samsung tv to activate it!thanks!
-
Thanks Ten, just wondering how I update my card with this image. Basically, using your N line setup, emms wont go to the card. Is an F line required for it to work? Only I use the box/server, no shares or anything like that...
-
Hey folks, have found my final image, OpenATV, (which is fantastic btw) and am having a little bit of difficulty with it.
I pop in my card, and turn on the box, the entitlements show up in oscam, and not in CCCam. Is this intentional?
Can someone clear up the confusion for me? I was under the impression that CCCam was the card reader, and Oscam just served users.Thanks!
-
Hey folks, I'm using TenBelow's backup image of Black Hole 2.0.6, which comes preconfigured with Oscam 8922/CCcam 2.13.
I think I'm having a lack of comprehension between the relationship between CCCam and Oscam.
I want CCCam to read my card (as intended)
and Oscam to control the serving of user, i.e. so I can watch channels on the same receiver.
Using the preconfiguration of 0963, i essentially change all of the 0963 with 09CD in every instance to make it compatible with Sly IT.
Entitlements show up in CCCam, however, the channels fail to clear, and the ecm info bar reads "sci /dev/sci0 hops....." and nothing clears.
Any ideas what I might be doing wrong (the logs don't complain of anything)?Code
Display Moreoscam reader file. [reader] label = ***IT enable = 0 protocol = internal device = /dev/sci0 caid = 09CD boxid = 00123456 ecmwhitelist = 09CD:B7,51 detect = cd mhz = 500 ident = 09CD:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-g = 1 blockemm-bylen = 183,81 blocknano = all audisabled = 1 [reader] label = CCCam description = cccam to localhost protocol = cccam device = 127.0.0.1,10001 user = xxx password = xxxx inactivitytimeout = 30 caid = 09CD ident = 09CD:000000 group = 1 blockemm-unknown = 1 blockemm-g = 1 saveemm-unknown = 1 saveemm-u = 1 saveemm-s = 1 saveemm-g = 1 blockemm-bylen = 183,81 cccversion = 2.1.3 ccckeepalive = 1 blocknano = all audisabled = 1 oscam.conf # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8891 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt [global] logfile = /var/log/oscam.log nice = -1 preferlocalcards = 1 [newcamd] port = 10001@09CD:000000 key = 0102030405060708091011121314 keepalive = 1 [webif] httpport = 16002 httpuser = admin httppwd = linuxsat httpcss = /var/tuxbox/config/skin-colorbutton.css httprefresh = 15 httpallowed = 127.0.0.1,192.168.0.0-255.255.255.255N: 127.0.0.1 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
edit: sigh, not solved.
-
if i were to get a box after that date, would the card die? i.e. is it possible to update the card after this date?
-
Hey folks, relatively new to the forum, would like to request a bit of info about how to update my sly it card.
Entitlements are good up until 1/11/13 (example).
I block all emms, except shared and unique, blocked bylen etc.
I use the card, and I use it on another receiver in my siblings house when I stay with him. All withing a personal Virtual private network. Nobody else uses this card.
When 1/11/13 comes, what do I do, when I don't have a sly italia box?
Any help is greatly appreciated. Thanks.EDIT: NOT SOLVED
-
vu solo2 is the best box. I've had both. a diseqc switch will negate the need for more tuners :)
