Try this.
MultistalkerPro.ipk unzip and add via FTP, other install from image or with telnet.
Thank you. Needs to check is these file good for me as I have VU+ Zero 4K
Posts by saalty
-
-
I have Zgemma H7 and MultistalkerPro working fine with OpenPLi Develop.
Can you inform the way that plugin needs to install on dev OpenPli image? Is it ebough to use telnet command and --force-dependencies, or need to install other packeges first, if yes is the order important?
-
I don't know is it worth to install develop version. How stable it is?
-
Hello all!
Can anybody provide me an information can I and if yes how to install this plugin on OpenPli 9.0 stable image?As I know that it is a bit complicated, this is the reason why I ask for this. Until now I used OpenATV 7.4, and plugin worked well, but unfortunetelly yesterday something happened and I had to flash the new image, but with the latest OpenATV (and with the previous) I had no luck, system was frozen during some installation and setup, and as I didn't know is it a hardware or software problem (after reboot or switching off and on it takes a lot of time until my Vu+ light switched on my Vu+ Zero 4K box) I tried OpenPli and it looks like working well for now.
-
Hi all!
I have VU+ Zero 4K + PurE2 7.3 (python 3.11.2). Whwen I tried to install v1.1 I got an erro message:
Coderoot@vuzero4k:/tmp# opkg install enigma2-plugin-extensions-multi-stalkerpro_1.1+git34+1d5ead30+1d5ead3828-r0_cortexa15hf-neon-vfpv4.ipk Upgrading enigma2-plugin-extensions-multi-stalkerpro from 1.0+git15+cb71ee5-r0 to 1.1+git34+1d5ead30+1d5ead3828-r0 on root. * calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-multi-stalkerpro: * libc6 (>= 2.39+git0+6d1e3fb07b) * python3-rarfile * * opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.Is there any solution for that? I'm nut sure how can I fix it....
greetz
saalty
-
Is there any way to monitor the video bitrate of the iptv stream?
-
Hi,
Is there any way to see full epg, not just now/next?
-
Thank you, it seems I was confused and I did not see beacuse it's colour
-
I installed DreamSat Panel, but cannot find Multistalker, searched all directiries nit just IPTV.
Yesterday also tried to install ipk file you linked here, I had successfully installation but with one error and it's not appeared in plugins list, but I was abble to remove it in plugins menu (red button) as it was in extension submenu. Weird...
-
Can anybody help me how can I install Multistaller 1.5 on my VU+ Zero 4k with OpenATV 7.2? When I tried using wget in terminal my enigma crashed after reboot. So I removed, then I tried ipk file downloaded from this topic and I got an error during the installation and don't see under plugins. I have python 3.11.0
-
I mean this:
Next week these channel names will be totally different according to next week fixtures. If I export this to the bouquet the channel names will be changes ie. update automatically when server changes the channel names sometimes at next week?
-
I'm using AJ Panel for creating and managing iptv buquets. Having no problrmd at all (foe example create folder "news" , and I just collect channels I,m interested in this folder. (no one is watching whole iptv, m3u list):)) thank you Biko
What is with live events when for example the channel name is the following football match? If you export these channels to bouquets the name will be update automatically?
-
Just fyi, it's not an issue just biko you mentioned that with loading service information, picons will be also added. Tried it with a playlist as well but as for the portals picons needs to be download manually
- Added automatic update of the picon and some EPG of the current channel if it is IPTV once the channel information is displayed.
I'm not sure I know what does that mean but it's my fault
-
Just fyi, it's not an issue just biko you mentioned that with loading service information, picons will be also added. Tried it with a playlist as well but as for the portals picons needs to be download manually
-
Display More
Thank you for the new release. I tested it on three portals. When I play iptv channel with AJ Panels player and I press EPG button (Info button on some stb's remote control) then I see upcoming four events like before (don't know is this four upcoming event is server side, but it is same for all portals I tested). When press Exit or OK then I see actual event in player bar what is very good as it wasn't work like this before. For portals for me picons not downloaded with pressing EPG button ie. calling service info, just if I do that manually with green button (Download options) but it is good.... Nice work, thank you very much
Are you set language on panel setting, new 8.6.3 replaced on 8.6.2
- Added automatic update of the picon and some EPG of the current channel if it is IPTV once the channel information is displayed.
There are several ways to display information:
1- Use the Info button in the Player-Bar.
2- Use the Info button for a long time, where the Event info menu appears, then choose AJ Service Information.
3- From Services/Channels, choose Current Service Information.
This feature was also available for Playlist channels
Note:
When showing the current channel information, several things are done:
1- If the working channel is IPTV, the panel will update the PIcon and EPG from the service provider (if available).
2- If an EPG is found in the device for the operating channel (of all types), then some information (such as the name of the event and its explanation) will be translated into the previously set language in the EPG translation settings in the “Translate Current Channel EPG” option in the EPG page.
I do not use EPG translate feature. Tried to setup for Englush after upgrade to 8.6.3 but I did not notice any change....
-
Display MoreDisplay More
Thank you for your detailed answer biko!
QuoteThis does not happen with portal EPG, though. It will be added to the coming version.
It would be nice! Thank you in advance
As I use multiple portals and they quite often make some changes in their chennel lists therefore I prefer to use AJ Panel as a standalone IPTV player...
greetz
saalty
Try new relase 8.6.2
Thank you for the new release. I tested it on three portals. When I play iptv channel with AJ Panels player and I press EPG button (Info button on some stb's remote control) then I see upcoming four events like before (don't know is this four upcoming event is server side, but it is same for all portals I tested). When press Exit or OK then I see actual event in player bar what is very good as it wasn't work like this before. For portals for me picons not downloaded with pressing EPG button ie. calling service info, just if I do that manually with green button (Download options) but it is good.... Nice work, thank you very much
-
Thank you for your detailed answer biko!
QuoteThis does not happen with portal EPG, though. It will be added to the coming version.
It would be nice! Thank you in advance
QuoteAbout loading your channels regularly:
Why don't you make a backup of your channels befor you load new ones. It will make it easy for you to retrieve them back whenever you want. Go to "Backup & Restore" and try the first two options.
Another option to try is:
Go to "Services/Channels" the "Import Bouquets from Backup Files". This option can open and browse the zip files that you download and will let you import selective or all bouquets.
As I use multiple portals and they quite often make some changes in their chennel lists therefore I prefer to use AJ Panel as a standalone IPTV player...
greetz
saalty
-
For me something is not clear, and I would like to investigate what mistake I made if I make any. So I'm triing to explain step-by-step what is my question.
As I use motorized dish, regulary I download settings for enigma2 from the internet and upload it to receiver with dreamboxedit tool. That means that my previosly exported iptv bouquets are gone everytime when I upload new settings as dreamboxedit is adjusted to delete unused bouquets after the upload.
So what I'm doing is start to watch some satellite tv like HRT-1 from MaxTV:
Then I open some IPTV from playlist:
As you can see there is no actual program displayed on player bar:
When I press EPG button on my remote control I have upcoming programs displayed:
When I press EXIT button on my remote control and I go back then I have actual program displayed in player bar:
So that part working fine. Let see this with a portal:
HRT-1 from MaxTV satellite:
Open IPTV from Portal List:
As you can see there is no actual program displayed on player bar:
When I press EPG buttom on my remote control I see much less upcoming programs (only four):
When I press EXIT button on my remote control and I go back then still don't have actual program displayed in player bar:
Then I go to Update EPG:
It does nothing as it uses MaxTV bouquet because I watched HRT-1 before:
So for portals it doesn't work like for playlists. If I download iptv channel list as a bouquets it works, but as I mentioned before my iptv bouquests will be deleted on next channel list (settings) update, also for some iptv portals there is a lot of lists what I need to download as a bouquet, and if something change in the channel list I have to do it again.
So my question is: this different kind of work for playlist and portal (for EPG) is like it should be, or I made some mistake or some setup missing or so on?
greetz
saalty
PS: I always use latest version, now 8.6.1, and I do upgrade from telnet.
-
Okay, thank you..... So I have to download as bouquet anyway. I did not know that.
Btw, for playlist is not necessary to download to bouquets. If I press EPG button on my rc, it working fine
-
Okay, thank you..... So I have to download as bouquet anyway. I did not know that.
