4600:0cfdace7:1000:0001:25:0:0
BBC Three HD
p:BBC,c:001b59,c:031b59,c:050001,c:091d510101,c:100004,c:111b5a,c:121b5a,C:2600,f:5
Display More
Try inserting a settings without editing and then tell me if the sound works on bbc channels or not. Also write down which receiver you have and which image you use?
You are right. I inserted your settings directly by echannelizer and all BBC Channels are ok.I know Dreamboxedit corrupt BBC settings, so since some weeks I use eChannelizer.
I've tested making some changes, and deleting some channels in your 31-12-2021 update, saving with echannelizer and BBC settings are no corrupted. They works well after reupload.
So, is a Dreamboxedit problem.
Sorry and thank you for your great work.
(vu+uno4k/openatv 7.0/openpli 8 develop)
Hi ciefp:
27,5W BBC HD channels on your settings don't have sound. Also for two SD channels: TBN UK and 5SELECT
I always have to correct them when you have new update.
In this file, settings for those channels are correct. Please change it in next update. Thanks.
Display More
Hi there
sorry to hijack this thread but has there been a recent change on the Abertis channel TP location?
As an example, on 11222H I can only open La 1 HEVC, La 2 HEVC TVE Star (Black screen). The others report no data on the transponder.
Issue seems to have started a week ago approx.
Anyone experienced the same?
Thanks
11222H All ok, except TVE Star (black screen). (Ciefpsettings)
I've tried both, ipk and bin files.
Perhaps it's only problem for my box (vu+) .
But I solved it!
I've changed /usr/lib/libcurl.so.4.7.0 for the same file extracted from previous update. And now works ok.
libcurl.so.470 in last update has 376940 bytes and libcurl.so.470 from previous update has 376556 bytes.
Probably a openATV 7.0 compile problem for my box (vu+uno4k).
Thanks !
Display MoreDid you installed ipk file or you sent the files manually ?!!!
With me on my DM920 + OpenATV 7.0 (Today update online) no problem ...
Ncam work just fine ...
CodeDisplay Moreroot@dm920:~# opkg install /tmp/*.ipk Installing enigma2-plugin-softcams-ncam (V11.9) on root. OE2.0 IMAGES: libssl1.1 OE2.0 IMAGES: libcrypto1.1 Configuring enigma2-plugin-softcams-ncam. :Your Device IS ARM processor ... openATV image [ All Config Files found ] ------------------------------------------------------- * Ncam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Patched and compile By RAED * *******************************************
Ncam working (
Coderoot@dm920:~# /usr/bin/ncam /usr/bin/ncam: /usr/lib/libcurl.so.4: no version information available (required by /usr/bin/ncam)This is just warning message not problem
Code/usr/bin/ncam: /usr/lib/libcurl.so.4: no version information available (required by /usr/bin/ncam)
I've tried both, ipk and bin files.
Perhaps is only problem for my box (vu+) .
But I solved it!
I've changed /usr/lib/libcurl.so.4.7.0 for the same file extracted from previous update. And now works ok.
libcurl.so.470 in last update has 376940 bytes and libcurl.so.470 from previous update has 376556 bytes.
Probably a openATV 7.0 compile problem for my box (vu+uno4k).
Thanks !
ncam-11.9 doesn't work on OpenATV 7.0 last update (14-09-2021).
by telnet test start:
/usr/lib/libcurl.so.4: version 'CURL_OPENSSL_4' not found (required by ./ncam-11.9)
All ok last 20210822 on vu+uno 4k, after reflashed.
OpenATV 7.0 works ok on my vu+uno4k. It’s a great image.
Put libcrypto.so.0.9.8 (file, not ipk) into usr/lib folder
I'd like to test 7.0 but there is'nt any image for vu+uno4k.
Display MoreWebif not not working on both my ZGemma H9S and Ocatagon SF8008 since last 2 updates.
Yes is a problem with last update of 16.04.2021
I have had identical problem, comeback to previous release, in my case (MutantHD51) i comeback to rel. 11.04.2021 and all comeback perfect
I flash over my full backup
Hispanico
No webif problem in 16.04 version on vu+4k. Flashed usb from scratch. No backup settings. All ok.
Yes, it’s fast. All ok. Thank you!
arm processor, vu+4k
Display MoreDisplay More:thumbup:Fairbird please help: I have Vu+Zero with Pure2 6,5 image and with Ncam 11.8 can not open powervu channels
I think isn't config files problem.
You must wait for some minutes on the channel, and then powervu works.
If you delete ncam.fs, powervu works fast.
Probably, with ncam.fs, first is searching all cccam servers, and after then it works with emulator (about 3-4 minutes on Vu+uno4k)
Edit: I tried disabling first 5 servers (tivusat) and last 3 servers (0, 30, 31) from ncam.fs (putting # on them), and now powervu starts working after 20-30 seconds)
We will fix it in next version ...
Thanks
Thanks.
Fairbird please help: I have Vu+Zero with Pure2 6,5 image and with Ncam 11.8 can not open powervu channels
I think isn't config files problem.
You must wait for some minutes on the channel, and then powervu works.
If you delete ncam.fs, powervu works fast.
Probably, with ncam.fs, first is searching all cccam servers, and after then it works with emulator (about 3-4 minutes on Vu+uno4k)
Edit: I tried disabling first 5 servers (tivusat) and last 3 servers (0, 30, 31) from ncam.fs (putting # on them), and now powervu starts working after 20-30 seconds)
ncam-11.3 with the same configs and image (pure2-6.5 image) works ok.
11.04 doesn't work on vu+ (uno4k) , pure2 image.
That is the message when try to start (telnet):
you can just rename your oscam to oscampw then send in to usr/bin and select OScamPW_11583
ok, thanks. I knew that, but always name will be OscamPW_11583?
I think I use a adapted version by you.
Creator doesn’t update it for a long time!
Then, could you adapt your multicam (only the multicam module, not emu module) to use for own built cams, on python 3, for use it in openatv 6.5?
