Discussion of article Enigma2 Boot Video Tutorial:
QuoteThis guide is intended to show you how to install a boot video on any enigma2 receiver. Croation and english translation provided.
Posts by mika
-
-
Discussion of article Enigma2 Boot Video Tutorial:
QuoteThis guide is intended to show you how to install a boot video on any enigma2 receiver. Croation and english translation provided. -
once you install this ipk file, you no longer have any problems later. you just change bootvideo. it's like a "skeleton base".
Well, I forgot to say this does not work on the open pli image, for that image there is another "skeleton base"
-
shr776 make this tutorial
-
Croatia
astra 19e - satellite dish 80 cm (can be smaller)
hotbird 13e - satellite dish 80 cm minimum
astra 23.5 - satellite dish 80 cm minimum
bulgariasat 1.9e - satellite dish 80 cm minimum
beams 39e - satellite dish 80 cm minimum
Intelsat 10-02 (0.8 ° W) - satellite dish 80 cm minimum
Eutelsat 16A (16.0 ° E) - satellite dish 90 cm and up (105 cm would be a standard of stability). otherwise the worst satellite. I get a nervous break when I'm going to mount or adjust the satellite dish on that satellite. horror, disaster.
-
žao mi je panda555 ali jednostavno neznam. ne koristim dreambox. netko ko zna na forumu objasniće ti postupak na usb.
-
bootvideo appears only when a deep restart resiver is running.
-
BlackHole-3.0.8-vuzero4k (BKP) by mika
EMU:
oscam_emu_11445
oscampowervu_11445
Ncam_7.9
Gcam_1.9
mgcamd-1.35a
PowerVu Ok..
Multistream Ok..
PowerVu Subtitle OK
added bootvideo by mika
-
oscampowervu 11445 r782
add tandberg to 'get cardsysten' in oscam.simples.c
add #include <sys/sysmacros.h> to globals.h
Ncam 7.9
-[dvbapi + streamserver] Added future audio stream types for ATSC (currently not activated)
-[streamserver] Separate PAT and PMT searching from P-Vu descrambling
-[streamserver] Added 'Caid' setting in the stream relay configuration
(From now on the stream relay accepts a caid setting via the webif. The relay will be enabled only for the caid(s) specified.
Channels with caids other than those specified in this setting will be descrambled via the dvb-api.
An empty setting means the stream relay will be not used at all.)
-(This unconventional encryption system (data are XOR-ed with a dynamic key) works only via the Stream Relay option.
Refer to the wiki for more information on how to configure OSCam-Emu for use with Compel.) -
evo jedan slatki bootvideo
Here's a sweet bootvideo
-
BlackHole-3.0.8-vuUno4k (BKP) by mika
EMU:
oscam_emu_11445
oscampowervu_11444
Ncam_7.8
Gcam_1.9
mgcamd-1.35a
PowerVu Ok..
PowerVu Subtitle OK
added bootvideo by mika
-
OSCam 11.445-r0 emu r782
Ncam 7.8
- add missing tandberg to get_cardsystem_desc_by_caid
-
uredu, sada možete instalirati image po želji(openatv,openvix...),ali prije nego započnete instalaciju imagea (naprimjer openatv ) u njemu potražite splash_auto.bin file i brišite ga.
kad to napravite,tada mozete slobodno izvršiti instalaciju imagea.
Now, you can now install the image as you wish (openatv, openvix ...), but before you start installing the image (for example openatv) look for splash_auto.bin file in it and delete it.
when you do, then you can freely execute the image installation.
-
gabi_2005 probat ću ti što što detaljnije opisati što trebaš učiniti.
dakle svaki image ima u sebi datoteku splash_auto.bin(ako ne želiš vidjeti logo, moraš ga obrisati ( vidi sliku )).
najbolje ti je da prvo instaliraš sluzbeni image za tvoj box(open source OI 3.0) ( nemoj obrisati splash_auto.bin ).
nakon instalacije tog sluzbenog imagea imat češ glavni službeni bootlogo.
sada mozeš instalirati bilo koji image ( openatv,openvix,blackhole,openblackhole,itd,itd..) ne zaboravi da prije instalacije obavezno obrišeš tu datoteku splash_auto.bin!! eto ja mislim da sam ti dao dovoljan trag što trebaš ućiniti. sretno.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
gabi_2005 I'll try to give you a more detailed description of what you need to do.
so each image has its own splash_auto.bin file (if you do not want to see the logo, you have to delete it (see image)).
it is best to first install the official image for your box (open source OI 3.0) (do not delete splash_auto.bin).
after installing this official image you will have the main official bootlogo.
now you can install any image (openatv, openvix, blackhole, openblackhole, etc, etc ..) do not forget to clear this file splash_auto.bin !! Well, I think I've given you enough evidence of what you need to do. good luck.
-
Ncam 7.7
-[irdeto] Fixed cw checksum bytes
-[dvbapi + streamserver] Rework audio identification for extended cw
(Removed some stream types from the audio list and added some that were missing. Hopefully this change will fix the rest of the powervu channels that have audio problems. If there are still channels with no audio, please report)
oscampowervu 11444 r782
[fix] P-Vu channels with non working audio streams
[fix] Irdeto cw checksum bytes were not correct
The rest of the P-Vu channels with non working audio streams should now work correctly.
---------------------------------------------------------------------------------------------------
OSCam-Emu version 782(revision 11444)
PowerVu & Tandberg OK...
+$Version: 782 $
OSEMU GIT Repository history
Emu r782:
- [fix] PowerVu channels with non working audio streams
- [fix] Irdeto cw checksum bytes were not correct
-- The rest of the PowerVu channels with non working audio streams should now work correctly. Please report back your findings.
OSCam SVN Repository history
Changeset [11444] felixka 25.12.2018 20:07:19
[gbx] - fix peer password not stored in config
- issue introduced with last commit
- thx azo for catching that
[gbx] - fix parameter 'gbox_reshare'
- show peer-id & online stat in webif reader
- code clear up
-
openatv-6.3-vuzero4k BKP (official ) by mika
EMU:
oscamsvn_11444
oscampowervu_11444
Ncam_7.7
Gcam_1.9
cccam 2.3.2
PowerVu Ok..
Multistream Ok..
PowerVu Subtitle OK
-
BlackHole-3.0.7-vuUno4k (BKP) by @mika
EMU:
oscam_11442
Ncam_7.6
Gcam_1.9
mgcamd-1.35a
PowerVu Ok..
PowerVu Subtitle OK
added bootvideo by mika
-
BlackHole-3.0.7-vuzero4k (BKP) by @mika
EMU:
oscam_11442
Ncam_7.6
Gcam_1.9
PowerVu Ok..
Multistream Ok..
PowerVu Subtitle OK
-
Ncam V 7.6
20-12-2018
-Code cosmetics
-[powervu] Added support for hash mode 27
OSCam 11.442-r0 emu r780 mips - arm
-
evo i za ostale enigma2 resivere.
Here is also for other enigma2 resiver.
