Ncam 4.5 compiled and patched by marouan & RAED
Ncam V 4.5
30-03-2018
-Add powervu hash mode 10
oscam-svn11401-arm_emu
Add powervu hash mode 10
build juli13
Posts by mika
-
-
RTS PICONI
-
opendroid-6.5_fullbackup_vuzero4k by @mika
Alternative SoftCam Manager 2.0-r0.0
emu directory: usr/bin/cam
cccam konfig directory : var/etc
ncam/oscamemu directory: etc/tuxbox/config
- PowerVu Ok
- Multistream Ok
PowerVU support without stream relay!!!!
EMU:
cccam 2.3.2 arm
Gcam 1.7 emu arm
oscam_powervu_11400-arm_Powervu
oscam svn_11401_arm
ncam_arm_4.3-Powervu
-
PKT Hyperion 6 fullbackup_uno4k by @mika
- PowerVu Ok
PowerVU support without stream relay!!!!
EMU:
cccam 2.3.2
gcam_1.7 arm
oscam_powervu_11400-arm_Powervu
oscam _svn 11401_arm
ncam_4.3 arm-Powervu
ncam/oscamemu/cccam/gcam directory: var/keys
-
PKT Hyperion 6.0_backup_xpeedc
multifeed : 1.9e+4.8+13e+16e+19e+23e+0.8w
EMU : cccam,oscam emu, ncam,gcam
config.dir. var/keys
-
Hyperion 6.0
- OE-Alliance 4.2
- GStreamer 1.13.0
- Python 2.7.13
- actual base
- [4k] where is posible: HBBTV enabled
- where is posible: KODI enabled
- new plugin: Auto Standby
- [h7/hd51] Install Manager to install in Startup 2-4 and set boot
- new option in Backup Manager: new option in Backup Manager: full copy of running image to hdd, usb or openmultiboot
- new packages
- a lot of fixes and updates
- many new stb
- cleared and optimized
Special THX OE-alliance and all betatesters.
FTP login: root, passwd: pkteam
Codehttp://e2.pkteam.pl/index.php?dir=IMAGE%20XPEED%20LX/HYPERION%206/ -
Hyperion 6.0
- OE-Alliance 4.2
- GStreamer 1.13.0
- Python 2.7.13
- actual base
- [4k] where is posible: HBBTV enabled
- where is posible: KODI enabled
- new plugin: Auto Standby
- [h7/hd51] Install Manager to install in Startup 2-4 and set boot
- new option in Backup Manager: new option in Backup Manager: full copy of running image to hdd, usb or openmultiboot
- new packages
- a lot of fixes and updates
- many new stb
- cleared and optimized
Special THX OE-alliance and all betatesters.
FTP login: root, passwd: pkteam
Codehttp://e2.pkteam.pl/index.php?dir=IMAGE%20XPEED%20LX/HYPERION%206/ -
Hyperion 6.0
- OE-Alliance 4.2
- GStreamer 1.13.0
- Python 2.7.13
- actual base
- [4k] where is posible: HBBTV enabled
- where is posible: KODI enabled
- new plugin: Auto Standby
- [h7/hd51] Install Manager to install in Startup 2-4 and set boot
- new option in Backup Manager: new option in Backup Manager: full copy of running image to hdd, usb or openmultiboot
- new packages
- a lot of fixes and updates
- many new stb
- cleared and optimized
Special THX OE-alliance and all betatesters.
FTP login: root, passwd: pkteam
Codehttp://e2.pkteam.pl/index.php?dir=IMAGE%20XPEED%20LX/HYPERION%206/ -
picon mediasat ( 5W ) Multistream 220x132
-
BlackHole-3.0.5 J Quad PiP-vuuno4k backup by @mika
- PowerVu Ok
PowerVU support without stream relay!!!!
EMU:
gcam_1.7 arm
oscam_powervu_11400-arm_Powervu
oscam _svn 11401_arm
ncam_1.7 arm-Powervu
ncam/oscamemu directory: etc/tuxbox/config
-
Brick Wall Portrait
-
openesi-6.0_fullbackup_vuzero4k by @mika
Satvenus E2 Setings Motor 42E-30w
- PowerVu Ok
- Multistream Ok
PowerVU support without stream relay!!!!
EMU:
cccam 2.3.2 arm
Gcam 1.7 emu arm
oscam_powervu_11400-arm_Powervu
oscam svn_11401_arm
ncam_arm_4.3-Powervu
emu directory : usr/camd
cccam directory : var/etc
ncam/gcam/oscamemu directory: usr/keys
-
Wood Text Effect
-
PurE2-6.2fullbackup_vuzero4k by @mika
Satvenus E2 Setings Motor 42E-30w
- PowerVu Ok
- Multistream Ok
PowerVU support without stream relay!!!!
EMU:
oscam_powervu_11400-arm_Powervu
oscam 11392_arm
ncam_arm_4.4-Powervu
ncam/oscamemu directory: etc/tuxbox/config
-
Photo into a Brick Wall Portrait
-
Brick Wall Portrait
-
Satdreamgr-5_fullbackup_zero4k by @mika
- PowerVu Ok
- Multistream Ok
PowerVU support without stream relay!!!!
ciefp settings : motor_68e-30w+VOD
EMU:
cccam 2.3.1 arm
oscam_powervu_11400-arm_Powervu
oscam svn 11401_arm
ncam_arm_1.7-Powervu
Alternative SoftCam Manager 2.0-r0.0
emu directory: usr/bin/cam
cccam konfig directory : var/etc
ncam/oscamemu directory: etc/tuxbox/config
-
NCam 1.7-r4 (oficial)
NCam cardserver v1.7-r4, (MIPS, PPC, X86, X86_64, SH4, ARM, EXE) Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
Changelog v1.7-r4:
- WebIf: show unauthorised access in ncam log.
- Fix for received CW has invalid checksum when CCcam own Node Id > 7FFFFFFFFFFFFFFF.
- When received CWs are different the logged warning contains wrong reader details.
- DVBAPI: parse pmtpid also for PC clients.
- Update a value to specific 15.
- ECM doublecheck is broken.
- CCcam 2.3.1 Support.
- Change CLOCKFIX default to disabled.
- Allow set demux for reader.
- Update EMU.
- Support for VideoGuard Sky Caid 098D.
- Add Max pids for extended CWs.
- Fix for Jet.
- Increase in the value of the maximum EMM / ECM size allowed.
################################################## #######################
************************************************** ********************************************
Important notice !! This is the OFFICIAL version (06.03.2018) There are no later versions. If you have downloaded any version, listed as 1.8, 1.9, 2.x, 3.x 4.x, etc ... These are FAKE versions. Be very careful when downloading non OFFICIAL versions, we are not responsible for those versions or what their authors may have added. The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license.
************************************************** *********************************************
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android ARM (For all api android).
ncam.arm-marvell ARM (Synology DS114, DS214 and similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
************************************************** *********************************************
Ncam settings web::
Ncam Admin Control: h***:127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.
Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.
-
openpli-6.1-release-vuzero4k backup by @mika
- PowerVu Ok
- Multistream Ok
PowerVU support without stream relay!!!!
ciefp settings : motor_68e-30w+VOD
EMU:
cccam 2.3.1 arm
oscam_powervu_11400-arm_Powervu
oscam svn 11401_arm
ncam_arm_v4.4-Powervu-Tandberg
Alternative SoftCam Manager 2.0-r0.0
emu directory: usr/bin/cam
cccam konfig directory : var/etc
ncam/oscamemu directory: etc/tuxbox/config
-
Ncam 4.4 compiled and patched by marouan & RAED
Ncam 4.4
Kod:CodeNcam V 4.4 05-03-2018 -ECM doublecheck is broken -CCcam-2.3.1-Support.patch
