Posts by fairbird

  • Ncam Emu by RAED

    Ncam is binary file not python ...

    So It has nothing to do with the Python version ..


    Ncam works very will on all python version ...

    Works on openpli, OpenaTV, vix ... etc amd all those images py3

  • Ncam Emu by RAED

    Test the keys from software.keys as you wrote your issue here

    Post
    RE: Ncam Emu by RAED
    @fairbird

    There is a major bug in NCam.
    constant.cw and SoftCam.Key is empty but I get ..
    (Code, 1 line)


    Doesn't make any sense because I zapped on a feed on 23.5°E and not Programme National. A wrong key is used.

    OScam emu is providing two options:
    (Code, 2 lines)

    Why doesn't this happen in NCam?
    OnOffline

  • Ncam Emu by RAED

    Quote from OnOffline

    I understand your point but have your read my post? Ncam defines or links keys from a channel that is not the one that is currently being used.

    Unfortunately, Ncam is useless for feedhunting since most feeds have SID 1.

    Code
    2600::0001:1FFF:0000

    I catch about 40-50 Biss feeds a day and can't use NCam for that. What solution do you have for this problem?

    As I said .... ncam fetches only one key, which is the latest key if it is available on the internet and has already been published... so it reads it directly from the internet and does not print it in the softcam.keys file on the device, so in the logo file you find one line, not two...

    And AFN channels work without a problem with everyone if there are new keys that have been published by those who own them.. But if the keys have not been published, how will you open the channels when they change their code every 4 hours?!!!

    I hope you understand how ncam works !!


    With regard to other encryptions that do not work, such as Biss, you need to manually change the caid in the softcam.keys file, or use one of the plugins that enter the codes manually, such as Keyadder

    Post
    RE: AddKey aka Biss Key Editor PLUGIN [OE2.0 OE2.5]
    (Quote from fairbird)

    Sorry for my later reply. I only replaced your Virtualkeyboard .py file , but with same result. In meantime , I also asked Pure2 Team
    for help and explained where is problem in crashlog ( six.ensure_text ). I would rather wait for their response without install
    new clean image for now.
    Panda555


    Ncam need to install libcurl4 first from image feed ... If and image does not have it then ncam will be not install ....

    You need first update the feed

    Code
    opkg update

    If you got and issue to install libcurl4 .. Please ask in image topic to get right answer !!

  • Ncam Emu by RAED

    Because You stil not understand How Ncam work with softcam.keys ... You need to more focus in our replies.


    Oscam just have original feature to read keys from locale (softcam.keys) that file from your device ...

    Oscam have just one reader to read (softcam.keys) Reader name is (Device_SoftCam) ...


    Ncam have more features to read keys from (softcam.keys) ..

    -from locale (softcam.keys) .. Reader name is (Device_SoftCam)

    -from internet (softcam.keys) .. download the file from web site to tmp directory then read the keys ... Reader name is (Internet_SoftCam) even if you have already empty (softcam.keys) file on your device It has nothing to do with this reader

    -from internet (softcam.keys) .. Directly to searching, reading catching AFN keys for web site (only AFN keys if the new keys was shared to web) ... Reader name is (github)


    So there is a very big difference between Ncam and Oscam in dealing with (softcam.keys)

  • Ncam Emu by RAED

    Depends on the service provided by the server owner ... The recharging line may be up to 24 hours , or less or more, and when it ends, you need to restart the cam so that it searches and fetches a new line if the free service is available and if the service link is changed, of course nothing will be fetched ...


    And as it is known, the services are free and not official, so as I have mentioned more than once, it is not guaranteed. Those who want a stable service have to subscribe to a strong server.

  • Ncam Emu by RAED

    Quote from MegaV0lt

    One more (stupid) question:


    What is the difference between oscam <-> ncam official <-> ncam ptched by raed?


    Really You don't know (What is the difference) ?!!

    You need more reading to the informations what I wrote in each version I have released !!!


    Quote from sarsan
    Quote from MegaV0lt

    Some more questions:


    How often is the ncam.fs reread? Only at startup/reload of reader?

    What if the lines go offline. Is it automatically rereaded?

    only fairbird know answer and clarify how this working

    ncam.fs file is from active free servers (As I mentioned more times in other replies)

    Just remove # from and number server you want to active it and then save the file after that restart ncam to get free server to work !!

    P.s: They are free servers, so they are not guaranteed to work continuously. The download link may be changed, so you will not find it working ...

  • Ncam Emu by RAED

    Update ...


    Ncam V13.0


    -updated cmake curl

    -Show curl in ncam.version

    -Some improvement for Android devices

    -If CCcam.cfg is disabled, it cannot be edited on the web interface


    Download link in first post

  • Ncam Emu by RAED

    Quote from Userone biz

    Hi,

    Which file do I need for Octagon SX88 SE 4K UHD ?

    To update Nacm ?

    try

    ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)


    And read this topic

    Thread
    Oscam on Octagon sx88 4k
    I have an Octagon sx88 4k, which version of Oscam do I use, I cannot get the oscamwebif to work, could you send me a config to use with a Cline
    pendragon8985

    and also

    Post
    RE: Ncam Emu by RAED
    If you want to send bin emu manually then you need to support your device by your self ..

    Give this command on telnet to know what is your device cpu is?!
    (Code, 1 line)

    As you see my Dm920 is armv7l = (cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
    (Code, 3 lines)

    and my image use new openssl 1.1, so The correct emu is (Bin files to support OpenSSL 1.1.1)

    >>>>>>>

    So If you don't want to use ipk (then help your self) ..
    fairbird

  • Ncam Emu by RAED

    Please download it again and try ... I have updated the file.


    Quote from Yawwilson

    fairbird! The PowerVu package on 57east and 34.5west(MTN world wide) has refused to clear... any way of fixing it?

    I can not confirmed . I don not have 57east and 34.5west !!!

  • Ncam Emu by RAED


    More details please to get help ans support ...

    On Which image did you test ncam ?!

    Did you install ipk or sent bin file only ?!!

    If you sent binary file !! did you install libcurl (important) ?!

  • Ncam Emu by RAED

    Quote from saranqbala

    Emu (biss/power vu) key ones are opened. Those who have the server stays open for 5 10 seconds and then stays like this. There is no such problem in 12.5-r3 but

    I am using OpenPLi 8.2 image, is there any solution for this? I would appreciate your help, thanks

    Here with us no problem with ncam 12.9 ... Please try other image to make more sure