Then just add this into same section of your keymap.xml and you have volume control buttons + your custome volume
I was under the impression that you did not use the volume buttons ;)
<key id="KEY_VOLUMEUP" mapto="volumeUp" flags="mr" />
<key id="KEY_VOLUMEDOWN" mapto="volumeDown" flags="mr" />
Well do all your settings for the buttons and save with plugin
Then use FTP to connect to your Vu+ and open folder /usr/share/enigma2
You will find a file named keymap.xml open that fie for edit
Inside the file find this code:
<map context="GlobalActions">
<key id="KEY_VOLUMEUP" mapto="volumeUp" flags="mr" />
<key id="KEY_VOLUMEDOWN" mapto="volumeDown" flags="mr" />
Change to:
<map context="GlobalActions">
<key id="KEY_RIGHT" mapto="volumeUp" flags="mr" />
<key id="KEY_LEFT" mapto="volumeDown" flags="mr" />
Save file and upload back to your Vu+ same location and restart enigma2 and you have the buttons as you want them
Display MoreLook what i found ;)
Dont now if its working with Pure2 image but you can try and see
But its on your own risk
Thank you so much for trying to help me.
But I see it's better to get a backup of the image with the function needed active.
So I am waiting for @gorski to upload one.
This is the same plugin used by PLI that you asked for from the start
I made some small changes to it so it will work on more images
But all credit to Pauli Neutrino the Author of this Plugin
and its working on Pure2, OBH, BH, ATV, OpenVix, VTI and about every E2 image there is now
I have personal tested all the above images so you can choose among them and of cause PLI.
Hope this will take some frustration of you my friend i also have that kind of Read Only Wife ;)
And thanks to all you others for your support its not easy when you get stuck and life gives you lemons :)
Look what i found ;)
Dont now if its working with Pure2 image but you can try and see
But its on your own risk
Its must be easier to re program the wife :sadgun::chuckle::chuckle:
There are many nice skins for PLI have a look in this section OpenPLI Based Skins
Skins for BH and OBH are copyright to thoose 2 image but there are several opensource skin converted to both image
But all skins from Matrix 10 and Army are BH/OBH only skins and therfore you want find to many of them for PLI
some ripp offs and bad copies are out there but the original quility is only find in the Skin feed of both images.
I also think that BH/OBH are the only images with their own skinners providing skins for just the images.
What kind of IPTV are you looking for?
You have E2iplayer in Blackhole Image you find plugin in the GreenPanel by pressing green button
and scroll down, If for some reason its not there download from Addons Panel
by pressing Green button >> then Yellow Button >> Choose Addons >> then download plugin from menu
I dont think this key setup is part of OpenBH but maybe Ev0 can answer this better then me :)
What is the function you are looking for with the Arrow keys ?
OpenBH is built on the OE-Alliance core so its diffrent from PLI
All softcams for Blackhole works just fine with OpenBlackhole
Mgcamd For arm based receivers
Files with IPK you install with Green Button>>Yellow Button and then choose >> Manual Install IPK Package
Files with tgz you install the same way only choose >> Manual install BH Package
I have not use MgCamd for a long time but i guess thet the good old 1.35a is still the best cam
Maybe give some info about the Motor? What is the model and specs about the motor then its easier to determin what settings you need
Maybe a link to the maker or seller of the motor
Hi KiddaC nice to see that you are here again and not dropping this project :thumbup:
I have no Sat no Cable for UK channels only IPTV so i have only been a silent viewer
But you are a big inspiration for many people and even when you are on a mission that might not be of use for all users,
its still interesting and nice to follow your work.
I am a big fan of CrossEPG have allways use that plugin but whats with all users that only use EPG Importer?
And i want be suprice if this plugin later down the path will out perform all other plugins for EPG ;)
Rember none of them covers all, Sat,Cable,Terrestial and IPTV and if someone is going to evolve an plugin to the 21 centry its you :thumbup:
And none of the existing plugins can handle IPTV EPG without and experts knowledge.
I discoverd a loophole in the first generation of Strong Conax cas 7 CI+ module that allowed with a season interface and card logger to obtain
the traffic info between the module and the card so you could read out the keys needed to emulate the pairing of the card.
This loophole have been closed and now there is no way of doing this.
So dont spend money on hardware you want be able to make it work.
And as a good indicator those crappy payservers dont provide any Conax paired channels anymore ;)
But you can take advantage of the plugin "RemoteChannelStreamConverter" to share your paired channels inside your home network.
Download from official Blackhole site https://www.vuplus-community.net/board/
Its in the plugin feed of Blackhole
Green Button >> Yellow Button >> Addons Download manager >> Blackhole Plugins
You find ABM 3.1 there and lots of other plugins :)
CrossEPG works about the same as EPG Importer only diffrence is that you cant use offline xml source.
But that its easy to bypass just uploading the source to some webspace like i did with jenseneverest EPG.
And with CrossEPG i did get an almost perfect UK EPG for IPTV channels.
Same now if i use Jedi and use rytec epg in settings almost all my UK epg populates with CrossEPG
If i use EPG Importer i get zero working epg with same settings. But with Slyq 7days epg as source
i get epg on channels renamed the same as Satnames about 49000 events.
If i use E-Channelizer and assign EPG ID from Sat 28.2 i get working epg for IPTV channels that are the same as Sat channels with EPG Importer
but same there have to use the E-Channelizer source not the rytec source.
I have followed this thread in the background since i guess you have not start to maybe get plugin to work with IPTV yet?
So for IPTV it looks like E-Channelizer works better and with E-Channelizer i can assign EPG to all non UK channels also
But this project looks really promising and if someone will pull this of its you KiddaC :thumbup:
My comment is somewhat off topic so just delete it when you have read it KiddaC :)
And i am guessing you have choosen your local folder for logos (Picons) before imoporting them ???
No problem for me importing Picons ;)
E-Channelizer can use any kind of image fomat and size and convert them to ptoper format (.png) and your prefferd size in Picon settings.
What i am guessing is that you dont have your Local Picon directory setup correct then you get an error when trying to assign picons.
When you select local piconfolder just mark picn folder dont open it,
E-Channelizer looks for Picons in folder.
Only when you assign one by one channel do you need to open folder.
If you install with ipk you can also uninstall from uninstal panel (Blackhole/OpenBlackhole)
Just press Green Button >> Yellow Button and choose Addons Uninstall Panel from menu
With ftp just delete the camscript and oscam file manual
/usr/bin/ is where you find the oscam bin file
/usr/camscript/ is where you fine the camscript file
if you also want to delte all your cnfigs you find them in folder /etc/tuxbox/configs/
