Strange?
could you please step by step tell us how you are trying to do it?
There has be some small thing you do wrong?
Posts by seagen
-
-
Correct IPK for Arm and Mipsel32 is attached
Nice skin by the way :)
-
Please describe how you are doing it please from the beginning?
- Extract software from attached files in earlier post
- Connect DM and PC with service cable (USB) no power on the Dreambox yet!!!!
- Start software and chose the right comport
- When software tells you it found Dreambox and ask you to power up dreambox first then switch on the box not before.
- After that is done software will fix ca not found issu and put in new flashloader for you.
- Now you can choose if you want to flash with software or you can re attach your box to the place
wher you usally have it and connect all cables, Hold front button under LCD screen pushed
at the same time turn on power with button on backside. Hold fronbutton until you se flashmode is on
and you get the ip address in the lcd to use to flash with. - Now you can flash my suggested image since it have the ssl (Bootloader file) in the .nfi file
We want give up yet its most likely som small thing you do wrong :)
-
I can see in the background of your picture behind Invalid filename
that flashloader is OK :)
What file is that you get Error on?
And take it easy my friend no need to :sadgun: yet ;)
-
If you have a really old Sim 2.10 try this one
There are lots of them and not all are working
due to diffrent version of sim card
-
Have you download and use any of the software fix i attached in my post over yours?
Download the https://www.linuxsat-support.c…ent/116650-sim210fix-zip/Unzipp (Extract File)
Try with Sunray fix first it should take care of the issue and then flash
image https://www.linuxsat-support.c…l84d-20160625-houara-nfi/
When done you can reflash with any image of your choice but first with my image since i know it works.
Hope this get you a step in the right direction :)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
Looks in last image like you have connection so without removing any cables from the box
just turn on the power and the NO CA FOUND error should clear.
After clearing you can chose if youwant to flash with software you are using
Or you can connect the box back and put in flash mode by holding frontbutton in when turning on power.
Then use the IP Address in the small display to open up the Dreambox flash screen from your web browser
and flash image.
But first of all you must do step one and fix the issue or you can never flash any new image :)
-
Extract the attached file and you find 2 programs that fix the CA NOT FOUND issue.
Try the Sunray fix first if not working use th Optiflasher.
Connect with USB Service Cable direct from pc to Box.
When and if you get an okey flash with this image
its a Sim 2.10 working image and see if you get life back
in your BOX.
If so then you can flash any image of your choice later.
-
How can I know if the box is with sim 2. ?
Look at the small LCD display whe turning on the box.
If its a sim 2.10 clone it will tell you that in the LCD Display
No need to take it apart and almost all have some glue over the sim card ;)
-
Yes i see sorry to see that but thats how they protect the free channels from us outsiders
so lets blame Brexit for that also ;)
But did not those guys get to work?
Denmark is a small country so maybe try and get in contact with them?
-
-
Thats what we are here for :)
and allays nice to see things working out :)
-
The main diffrence between a C band dish and an KU band dish is how they look and how they focus the beam.
C-Band is an old system where the waves ar long and low quality so therfore the Dish is large and have a center focus.
Ku-Band is new system have stronger signal since its waves are short and therfor can be used with an Offset dish.
In theori you can use an center focus dish to recive KU band freq but you need a special adapted LNB
There are some combi LNB that handles both bands but the work better in an 90cm offset dish.
So save the money and dont buy that old dish its better you find an 120 Offset dish.
And i am pretty sure you find a Triax dealer in Denmark.
-
There is many settings in Oscam but by default its asking all readers but prefer the one with lowest usage.
And if you dont run one big operation with lots of users there is no need to change those settings.
You can leave as is and have no problem.
-
If you have your own modded or converted skin adapted for Blackhole Image please post them here.
But not any ripp of skins allways have the authors permission before you upload anything to this section.
Ask and you get suprised how often you get a YES and even often get some help from the author.
I have attached a basic skinfile for Blackhole thatyou can use as you starting base.
Tanks to Matrix 10 over at VC for sharing this base set.
This is a good place to start and do some edit and see how its work.
Change some Graphics and start understand the settings and screens.
I will open a separate thread for questions so only post working skins in this section.
Skin does not need to be full of functions and lots of graphics before you showcase it.
Screenshoots is allways nice
Please use our file sytem for upload. No external links please
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
Here is the Swedish translation :)
-
I have been trusted by Army and Team Blackhole to restore and convert the legendery Armys skin to FHD (1920x1080)
We all rember his amazing skins and i felt that this could not just dissapear in to the history.
And all the young users out there who even might not seen them ;)
So as my first Project I Started with DarkSky-FHD and i also got an amazing amount of help
and support from Team Blackhole to start up this project.
Skin is now done and you can download through the Blackhole Skin Feed
Press GreenButton>>YellowButton>>Addons Download Manager>> Blackhole skins.
Here are some screenshots.
36d4bc7c342abd4.jpg9f5d6cd563e1bbb2.jpg
605f744252.jpgca95f94162.jpgadc11957c870b77d.jpg532a9d0f9fd6ae59.jpg
Special Thanks to Army for trusting me with this and for giving me the original to work with :)
-
Hello everybody
We have started up a new section here for Blackhole skins.
So lets keep things as clean as possible.
I am going to setup some thread where we can share skins, experince and some tricks to how.
I also want to keep this skin section clean from ripped of skins.
So before you upload any skin make sure they dont conflict with any Copyrights.
Allways ask the Author of the skin if you do any converting of skins made by someone else.
And for files no external links please!!! we have a easy to use upload system so use that
Just press the attachment button and upload.
And of cause your own made skins are very much welcome in this section :)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
-
And forgot to tell you its very easy to upload files and images
Just press "Attachment button" and then upload button.
