Yes I have a mini USB port on the back . The box is sunray 4 HD se.
How do i update Dreambox 800 se Clone with a new image
-
- Image Flashing Support
- meni barel
- Closed
- Thread is marked as Resolved.
-
-
Did you have Sunray flash tool for repair your box?
-
No I don't have what should I do?
-
https://www.singapore-dreambox…nray-flashup-and-browser/
Here it is written how to flash Sunray HD receiver. In attach is Sunray Flash Tool.
-
Ok thank you so much I will try
-
How can I know if the box is with sim 2. ?
Look at the small LCD display whe turning on the box.
If its a sim 2.10 clone it will tell you that in the LCD Display
No need to take it apart and almost all have some glue over the sim card ;)
-
Does your receiver go into "Stop" mode? If so, you can flash the bootloader.
I'd strongly recommend you physically check what Sim card you have. Some have labels on the bottom of casing. If you open the box, be gentle, don't break the sim card holder.
-
If it's a Sunray it should have the Sim2, but as we seen it failed with Sim2 image.
So it can have any of the other sims, most probably Clone A8P, but could be Ferrari, EStar or Japhar.
Emo
-
Extract the attached file and you find 2 programs that fix the CA NOT FOUND issue.
Try the Sunray fix first if not working use th Optiflasher.
Connect with USB Service Cable direct from pc to Box.
When and if you get an okey flash with this image
its a Sim 2.10 working image and see if you get life back
in your BOX.
If so then you can flash any image of your choice later.
-
I’m trying to do flash and nothing, it’s 2.1 simb590e1f1d9cab3a1.jpg
-
Looks in last image like you have connection so without removing any cables from the box
just turn on the power and the NO CA FOUND error should clear.
After clearing you can chose if youwant to flash with software you are using
Or you can connect the box back and put in flash mode by holding frontbutton in when turning on power.
Then use the IP Address in the small display to open up the Dreambox flash screen from your web browser
and flash image.
But first of all you must do step one and fix the issue or you can never flash any new image :)
-
I was trying to do what you told me and it’s not changed NO CA FOUND
-
Have you download and use any of the software fix i attached in my post over yours?
Download the https://www.linuxsat-support.c…ent/116650-sim210fix-zip/Unzipp (Extract File)
Try with Sunray fix first it should take care of the issue and then flash
image https://www.linuxsat-support.c…l84d-20160625-houara-nfi/
When done you can reflash with any image of your choice but first with my image since i know it works.
Hope this get you a step in the right direction :)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
This what I’m receiving and it’s stopped bd703f078590f8b7d4.jpg
-
If you have a really old Sim 2.10 try this one
There are lots of them and not all are working
due to diffrent version of sim card
-
I’m going crazy what now 92be650294d.jpg
-
I can see in the background of your picture behind Invalid filename
that flashloader is OK :)
What file is that you get Error on?
And take it easy my friend no need to :sadgun: yet ;)
-
I found on net SSL 84D SIM 2.10 for your receiver. Install first this SSL with Sunray Flash tool.
After installing, you must put image in post #33.
SSL 84D in attachment.
-
I’m trying again
-
nothing help same massege no ca found
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!