Hi ! I've installed today the image !
Does not detect any NIM's ! so ... no tuner on board !
Can you build image as tar.bz ? thus can be loaded by DM loader
as well by ofgwrite !
Posts by mihaip
-
-
Recovery Gigablue Trio 4K
Problem details:
By wandering around and making analogies with Dinobot I made the above
allocation !!! I created a Gigablue Trio 4K folder which I populated with what I found
in the OpenATV Recovery image !!! and the Kernel from the Normal image !
- I switched to the faulty receiver with network and serial connected!!!
- I deduced the IP it got, search on the router
- I started TFTPD, the FTP server and gave it the parameters
- I started HiTool and gave it the parameters
And now, brave one! I said ... Burn! Said and done! at the end
I saved the configuration file (XML) for eternity ! yippee ... Reboot !!!Gigablue has a strange recovery system! uses the Kernel existing in
EMMC and not the one delivered in the recovery image on the USB stick! so
if the Kernel was stupidly rewritten... in EMMC he launches it and
it remains cracked! -
Here is the result...
Download V20 : https://mega.nz/file/2s9WnZxY#…zB6cCF0TF-KlPp5Hm0vnw5fi4
Download V30 : https://mega.nz/file/q0MliRZL#…8m8NhAaoXcCjXkyppM-QFJchw
Download V40 : https://mega.nz/file/7o1wnRZJ#…BwZJJb1arwlmWerpA4hgaDulM
These are the 3 fast recovery images "usb_update.bin" !
I highly recommend you to use them only in case of extreme necessity !- format a FAT32 stick,
- write usb_update.bin on it,
- insert the stick into the receiver,
- turn on by pressing GREEN repeatedly!
- the EMMC control partitions will be populated
- after that ...reboot- format the stick and write the desired image folder on it
- insert the stick
- turn on by pressing GREEN repeatedly!
- the desired Enigma2 image will be loaded
- after reboot you will wake up in the Start Wizard Ennigma2I can't end without thanking everyone who helped me!
sosozah, attila, @innersat91 and obviously zildan! -
Public call
Whoever has a functional Amiko Viper 4K V30 at home and can lend a
hand of help , is asked to insert a FAT32 formatted USB stick into it ...- initiate a Telnet session (PuTTy)
- and copy/paste the following commandCodedd if=/dev/mmcblk0 of=/media/hdd/mmcblk0.img count=128000 bs=512This command copies the first 62 Mb of Flash (EMMC) at block level and
writes an image file on the stick that can be restored on another Viper V30
... partially functional, reinstalling the Enigma2 image and bringing it back to life!Please upload the file to MEGA and give a link !!!
-
Try this recovery ...
-
Well ! I don't have .py files to start from !
-
Thanks ! Crash ... was solved !
Multiboot selector ... still not working !!!
- /data is mounted
- bootconfig.txt is there
- just the variable "default" must be changed from
0 to partition index (o-3) selected as destination
-
Difficult ! download is blocked without details or options !
I-ll disable the antivirus ! but ...
Done ! installed but have issues !
Crash in Start Wizard at language selection
Enigma2_crash_2024-12-03_05-53-22.log
Crash in Multiboot selector
-
Well ! bad news ... virus detected !!!
-
You can flash it using HiTool and a TFTP server on PC !
network and serial conexion ! But ... the result does not
working ! missing "deviceinfo" partition !
The idea was to offer an "original" image ! the one to be
used to restore the original STB status ! not the "patched"
one !
-
Hi ! how about to add support for local M3U lists ?
-
Hi Kitte888 ! I like Kitte888 FHD skin ! I'm using it in OpenATV 7.5 and
is working fine ! also I think that in "programs list" using orange instead of
light blue and no italics .... will be better ! Can you try to make a version ?
-
Well done ! thanks !
-
-
Thanks Pipo ! better later than never !!! I've missed your message !
-
-
You have a working embedded backup and restore function
into OpenATV 7.4 ... menu-setup-software management- image backup !!!
-
-
Hi StorM ! any chance to have 5.4 up to date ?
-
MultiStalkerPro 1.2 installed into the new OpenATV 7.5 Beta
cannot run due to : "Wrong ELF Classe" ( Muta@nt HD51 )
