OpennVIX 6.5 does not implement some mandatory video requirements !
Posts by mihaip
-
-
I think , in the version aarch64 VOD ... is better if you don't print the
movie cover at the start of every new page ! because this this it
take time and is producing a screen flashing !
-
Thanks ziko !
In V1.1 git39 aarch64 ...
- in VOD loading event pages is chaotic as was in 1.0
- only gstplayer give video and is choosing a wrong audio channel
- audio volume can be only MIN and MAX
-
Hi Ziko ! can we have a version 1.1 for aarch64 ?
I've tested 1.0 git18 on Dream ONE but ... is too old !!!
Please !
-
szprot5 - you are right ! my mistake ... the archive !!!
-
darius ... you cannot !
-
Probably EMMC Flash ... is gone ! this is the bad sign ...
-
Try to install OpenATV 7.4 recovery image ! that one contains the last full image !
When recovery install ends ... must boot the normal image ! If this does not
happen ... is a bad sign !
-
If the installation of the "recovery" image does not work !
You are lost !!!
- put the recovery image on a FAT32 stick (unarchived)
- press recovery switch on the back panel
- power-on Zgemma keeping pressed the switch
- release the switch after logo appear and ... wait !
-
Sorry to disturb your discussion !
after all that ... does the man has signal ?
-
I suggest a practical approach ...
- set the right angle on the motor mounting according to your latitude
- try to set motor mounting alignment to South !!! use a compass !!!
- fix the antenna on pole !
- set your STB on Intelsat 901 27.5w .
- then chose from menu "Signal finder"
- choose 27.5 w , Predefined TP , 11495, V, 44100
- then your motor should try to get that position
- if your pole is vertical , your LNB should point approx. to 27.5 w !
- from now on ... you should find the right elevation !
- slowly , with hands , up and down, till you have signal !
- then fix elevation screws
Probably an expert could make more fine adjustments ...
but you'll get signal from Intelsat 901 at 27.5w !!!
Your antenna setup is difficult because you don't have a
satellite exactly over Ireland to be used as reference
for South ! the existing 5w or 7w does not have signal
in Ireland !!!
-
Not enough info about the situation !
- what image is active now
- how are you trying to update bootloader ?
Use all details !!!
-
Yes ! is working into a DreamOS Multiboot organized by GPT Plugin !!!
as well into a OpenE2 Multiboot organized by OpenATV !!!
-
Is a very good image ! has all what is needed ...
- is a complete image ! video , audio and subtitles works fine !
- it have a server for skins , plugins and addons
- technically is up to date as OpenBH is
- everything I've tested ... works ! on Dream ONE SAT and COMBO as well !!!
- I've installed it into a DreamOS multiboot as well into OpenE2 Multiboot
and is working fine in both cases using for return in multiboot GPT Plugin !
Congratulations Storm !!!
-
Hi to all !
Does anybody still have the Egami 10.0 Enigma2 Amiko Viper 4K V20 archive ?
or Egami version 9.0.6
-
You need a special image ... take it from here :
OpenPLi 8xStar IPTV - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim3
or ...
-
Amiko A5 is an old STB ! his Enigma2 was'nt as good as you believe !
The drivers quality was poor ! Ustym was a better choice !
-
Well ... do it for Viper 4K V20,V30,V40 !!!
-
Well it is in their DNA !!! probably is verifying some kind of signature !
10 years ago they tried to block DM500 clones by examining MAC !!!
-
Well I've tried with OpenATV ... same behavior !!! Captain said that some Kernel
module must be activated/loaded !
Well good luck ! if you need some help for testing ! anytime !!!