Happy New Year to all fellow Boardies
For those lovers of OpenATV, here's Champions OpenATV 5.1 based image
Here's a link to my Champions 28 December 2015 OpenATV v5.1 based Image - for the Amiko Alien2, AA2+ and other ST7162 Based Boxes.
Image installation procedure - the safe, simple and 100% foolproof way. If you already have an Enigma2 Image on your box, skip steps 1 & 3 below
1. Download the E2 Plugins from the following link http://goo.gl/bcSWub. Take the whole folder and copy it to the root of any USB stick
2. Boot the box into the default Spark operating system. If your box is in Enigma already, turn it off, hold in the OK button on the box and keep it pressed, turn on the box and release the OK when you see the FORC message on the box. Press the Up arrow on the box which will then say SPAR and then press OK
3. Insert the stick into the box. The system will see the stick being installed and prompt for the installation of the plugins - say "Yes"
4. Download and copy the pre-prepared image of your choice to a USB stick. You can copy any number of images to the same stick, putting each in it's own separate directory on the stick. An image contains two files - uImage and e2jffs2.img
5. Press Menu, Press Down and Right to plugins. Select the e2upgrade plugin from the list. On screen, you then will see a box with /c/storage in black writing in a yellow bar across the centre of the screen. Click OK to navigate to the folder you want, press Red to select and press Red to Upgrade
6. Upon completion, turn off the box. Press and hold the OK button, Turn ON the box and wait until you see the front panel say FORC. At this point, release the OK button. Press the DOWN arrow button on the box and it will display ENIG. Press and Release the OK button.
7. The box will now reboot into Enigma
This image is working with the following plugins:-
AutoTimer, AutoVolumeAdjustment, AutoBoquets (AutoUpdate turned OFF), CrossEPG (0.8.1) (Updates at 04:00 Daily), Various Skins, all Picons, Rats Picons, OSCam v11201 (with blank sample C-Line and N-Line Readers), PermanentTimeShift (Turned Off), OpenWebIf, Samba Server, Streaming / Recording of $ Channels while watching another $ channel, and more. CrossEPG is also flushed out once a week. This image uses the bundled OpenATV EPG Display.
You can obviously install any other plugins you choose. Use the Download menu in Plugins or just FTP the .ipk files to the /TMP folder, telnet to the box and type IPKG INSTALL xxxxxxx.ipk. This should work for most plugins.
The image is setup to use DHCP automatically and is also set for using HDMI at 720p. Terrestrial is NOT YET scanned and will need to be setup in SETUP > SERVICE SEARCHING > TUNER CONFIGURATION
Change the Weather in the Metrix skin - go to Plugins > MyMetrixLite > Weather and set the number for your location. Get the number from HERE - http://metrixweather.open-store.net/#weather
FTP and Telnet - Username "root", Password Blank
WebInterface - http://box_ip (Default Port 80)
DreamBoxEdit paths - /etc/enigma2/
OSCam - http://your_box_ip:8888 - Username "root", Password "oscam"
Enjoy !!!