Mgcamd For arm based receivers

Is it likely that there will be 1.45c for ARM processor?

The MIPS version works great for S*y DE (and anything else with cccam protocol)

not working on zegmma h7s box

Not correct. Tested.

can u help me ?

I already have: Mgcamd For arm based receivers - just read a bit...

But!

OSCam Emu works better! See the thread in the stickies in the OSCam Emu section and easy-peasy...

Quote from technodvl2

found this on a german forum

got it working on openATV zero4k

i did not install with the ipk

i unpacked the ipk with 7zip

sent the bin to /usr/bin

the config files to /usr/keys

and just used telnet with this command

ln -s /lib/ld-linux-armhf.so.3 /lib/ld-linux.so.3

and the openATV start script in etc

mgcamd_135a.emu

with this inside

emuname = mgcamd_1.35a

binname = mgcamd_1.35a

startcam = /usr/bin/mgcamd_1.35a

stopcam = killall -9 mgcamd_1.35a

if you follow what is is said above you will get it working on

openATV VU+ Zero4K

nothing more to be said

Hi Tech

I cant find bin file in openatv mgcams 135 only files are inside the zip file are :

Usr/ Keys

ccamd

newlist

ignore

mg cfg

peer

priority

replace

enigma 2 plugin mgcamd135 ipk file

When that unzipped files inside are:

control.tar

data.tar

debian.binary

So where do i fins bin file ?

Where do i find OpenATV start script to go in etc ?

Also where do i find mgcamd135.emu with the following files

emuname = mgcamd_1.35a

binname = mgcamd_1.35a

startcam = /usr/bin/mgcamd_1.35a

stopcam = killall -9 mgcamd_1.35a

Thanks any help appreciated pls, using ULTIMO 4K with FBC Tuner and Dual Tuner alsoand having freezing probs with Oscam especially when trying to

record more than 2 channels constant freeze

Thanks

Eggie

Or could you send all files and where to put them pls.

Display More

ok the files are in previous post

only thing missing is this

help yourself

Hi Tech

I cant find bin file in openatv mgcams 135 only files are inside the zip file are :

Usr/ Keys

ccamd

newlist

ignore

mg cfg

peer

priority

replace

enigma 2 plugin mgcamd135 ipk file

When that unzipped files inside are:

control.tar

data.tar

debian.binary

So where do i fins bin file ?

Where do i find OpenATV start script to go in etc ?

Also where do i find mgcamd135.emu with the following files

emuname = mgcamd_1.35a

binname = mgcamd_1.35a

startcam = /usr/bin/mgcamd_1.35a

stopcam = killall -9 mgcamd_1.35a

Thanks any help appreciated pls, using ULTIMO 4K with FBC Tuner and Dual Tuner alsoand having freezing probs with Oscam especially when trying to

record more than 2 channels constant freeze

Thanks

Eggie

Or could you send all files and where to put them pls.

3204e2030be1785bb506aa0.jpg

unzip the ipk with 7zip

as told in previous post

read it

e5212d6bb5173738.jpg

linuxsat-support.com/cms/attachment/121319/

enigma2-plugin-softcams-mgcamd-1.35a_openpli_armv7ahf-vfp-neon.ipk - mgcamd not work on duo4k openpli 7.x image.

in 'postinst' we have:

ln -s /lib/ld-2.21.so /lib/ld-linux.so.3
ln -s /lib/libcrypto.so.1.0.0 /lib/libcrypto.so.0.9.7

should be:

ln -s /lib/ld-2.25.so /lib/ld-linux.so.3
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0

then we got:

./mgcamd: /usr/lib/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./mgcamd)

OpenPli image include 1.0.2k openssl version

root@vuduo4k:/usr/bin# openssl version
OpenSSL 1.0.2k  26 Jan 2017

but this ssl version does not support ssl 1.0.0 :(

root@vuduo4k:/usr/bin# grep OPENSSL /usr/lib/libssl.so.1.0.2
OPENSSL_cleanse
OPENSSL_DIR_read
OPENSSL_DIR_end
OPENSSL_1.0.2d
OPENSSL_1.0.2g
OPENSSL_DIR_read(&ctx, '
OPENSSL_malloc Error

any solutions?

hi, i have satdream image installed on the mutant 51 4k and there are magikcam 1.35 plugins from its plugin but being the basic image Openpli on this works the same cam putting it on Openpli does not work, how to solve.

Sono riuscito a far funzionare MgCam 1.35 ma ho cambiato il file mg_cfg con quello di MgCam 1.38

ora funziona ma al cambio di canale devo riavviare la Cam chi può darmi informazioni su dove cambiare ...?

log log:

===== Nagra ECM su CaID 0x1805, pid 0x09f4 ======

prov: 000000

codice: 20 E2 36 38 8B DB 9C 02

cw1: 47 EF 44 7A 59 85 29 07

Firma OK

fonte: net (wwwwwwwwwwwww)

776 msec - lun 10 feb 12:23:12 2020

con immagine Satdream su Mutant 51 4k.

Ho aggiunto

lib

libcrypto.so.0.9.7

libssl.so.0.9.7

ora funziona bene ma non ho video sui tedeschi.

After a long search and reading, I can't get a working Mgcamd for VTI image on ULTIMO 4K.

Can someone come to my rescue please?

Thank you

Quote from cosy

After a long search and reading, I can't get a working Mgcamd for VTI image on ULTIMO 4K.

Can someone come to my rescue please?

Thank you

Forget it, NCam is much better.

Where can I get this Ncam please ? whiv cersion works on ARM

Ncam Emu compiled and patched by READ

Under the NCam header, the line immediately below the Mgcam header.

Thank you, but I actually wanted mgcamd for Ultimo 4K

Has someone ever got this "thing" to work on ARM receiver?

1.35..arm

Can you say more on this please?

Just quoting a number isn't enough

Mgcamd_1.35a vu duo 2 4Kse /lib/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found

mod libcrypto.so.1.0.2 work ok mgcamd_libcrypto.so.1.0.2_vu_2_4kse.rar