Hi all,
Help needed. Got this box yesterday with open vix preinstalled . I've set up and scanned for channels all OK with FTA clearing . I now want to install a cam and get my line on there.
The start of the line begins N, what cam do I need ?. on my non Linux box I used a ccam and its been fine.
I've so far followed instructions from the net and tried ccam and mgcam to no avail I'm really struggling here.
Thanks in advance
Sg
Xtrend et8000
- Simonglovers
- Thread is marked as Resolved.
-
-
Hi Mate,
You can download the cam from the feeds in the plugins.
As for entering your details you will need to use a PC and an FTP to communicate with the box.Suttsy
-
I've tried to do this as per instructions and I keep getting an error message that I need to set up etc cfg file. Does it matter what cam I use ? Mgcam or ccam? Which version?
-
Someone should have explained that when you download the emulators from the OpenVix download feed they do not come with any pre configured files you have to add these yourself before the Cam will become operational, you can find config files for the most popular cams in this section here: http://linuxsat-support.com/forumdisplay.php?f=153, N works better in Mgcamd
Just to let you know buddy that so called Line Payservers are frowned upon on this forum so i do hope the line in question is from a friend/peer
-
master G
Moved the thread from forum Clarke-Tech | Xtrend Support to forum Xtrend - All Models. -
master G
Moved the thread from forum Xtrend - All Models to forum Xtrend ET-8000. -
master G
Moved the thread from forum Xtrend ET-8000 to forum Xtrend - All Models.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!