Hi guys iv installed ccam 2.3.0 on my box, iv got it enabled and copied the cfg file to \etc, but when i go to http://192.168.1.3:16001/ there is no info, what is wrong, I've def started ccam as it says active, using vix image
Cheers
Hi guys iv installed ccam 2.3.0 on my box, iv got it enabled and copied the cfg file to \etc, but when i go to http://192.168.1.3:16001/ there is no info, what is wrong, I've def started ccam as it says active, using vix image
Cheers
Yes thats enabled, im running 2.3, can someone send me link to cccam install guide and how to remove this version, should I run 2.2.1, iv got a feeling its not installed correctly or isnt working properly,
im using vu solo, vix image, kernel 3.1.1 Version 2.3
how do i remove the version i have, I installed 2.1.1 or 2.2.1 over 2.3 but it still says 2 when I activate it
also if 2.3 is ok for my machine then theres no need to remove, why would it not be working
heres what the cam server says when i go to 192.168.1.3:16001
Current time 21:47:02
NodeID: dbd82162f27c7033
Uptime: 00d 02:14:40
Connected clients: 0
Active clients: 0
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):
CCcam is working like it should, what is the problem ?
Im not getting the channels, if I send you my cfg file can you take a look
QuoteIm not getting the channels, if I send you my cfg file can you take a look
You can post CCcam.cfg here without any personal details, would be a good idea to let us know what card you have and everything you`ve tried already to get it working.
here it is with end bit changed, all I;ve done is install ccam using pkg file and copied this file to \etc folder, and cccam pkg to \var\volatile\tmp, i now seem to have 3 cams, how do I remove them
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :password
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :password
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :password
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0 xx xx xx xx
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
never post private info ;)
all your ports are shut tight from outside your network so you need to open whichever port you´re going to use with CCcam.cfg ( do not use the default 12000) in your router to be able to communicate with external networks
the nline at the bottom is missing a port : N: xxxxx.xxxx.dXndXs.oxg PORT user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
what port should i use and can you type it into the above example so I get it exactly right. Cheers
here are typical nlines :
#N: 127.0.0.1 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#N: 127.0.0.1 15001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#N: 127.0.0.1 10000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
you can clearly see the port just like the one I posted earlier.
In post #4 by Master G ,he has given you a link of vix ready to go,,you just need to find whichever one suits your card.
I've already done the cccam install and its still not working, I thot you said I just need to add the a number to the file where it said port and that was it, can you out it into the file I should you so i can copy it, i totally clueless
in post #2 you have the .cfg file you need, replace whatever C/N/Flines you have in the present one then just ftp the new .cfg file over into var/etc..and make sure that the router has the same port open.
sorry mate, im lost, anyway you could pm it to me made up for me with my settings
start reading the stickies here: Forum Gateway - Powered by DnP Firewall
already done that for 2 days, someone already gave the file ive showed you, i have wasted 14 hrs on this and simply dont know what Im doing, I dont even know what the N stands for it my file
Can I add that im not sharing just trying to access a server.
Cheers
so you are trying to access a payserver with an nline ?'
btw.. 14 hours is nothing compared to what us hobbyists spend ;)
My mate has his own server and trying to access that, Im almost there but just need the file I showed you completed, I didnt create that file, sandman did and it aint working, you guys suggest the ports were setup in the file so thats all I need done, ive opened the port on my router, ive hit a brick wall
Don’t have an account yet? Register yourself now and be a part of our community!