OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786

hai
I successfully installed OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786
yesterday 7-pm starting c*am server .then my receiver connect to c*cam server. i checked 1 AM connection is ok then i checked morning 5.55am c*cam server not working. could u pls replay for me
thanks

Quote from binusona

hai
I successfully installed OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786
yesterday 7-pm starting c*am server .then my receiver connect to c*cam server. i checked 1 AM connection is ok then i checked morning 5.55am c*cam server not working. could u pls replay for me
thanks

I do have exactly the same problem...
Checking logs i found thst at that time Oscam is not running and script tries to launch it again. Obviously not succesfully since i have to do it manually.
I cannot understand why always at that time? Is there a script to reboot server?

this is from oscamcheck.sh
"Sat Mar 3 06:06:01 UTC 2012: Couldn't find oscam.x86 running. Restarting server-binary" all until 8:00. Thn i dit it manually ..

Quote from pegaman

I do have exactly the same problem...
Checking logs i found thst at that time Oscam is not running and script tries to launch it again. Obviously not succesfully since i have to do it manually.
I cannot understand why always at that time? Is there a script to reboot server?

this is from oscamcheck.sh
"Sat Mar 3 06:06:01 UTC 2012: Couldn't find oscam.x86 running. Restarting server-binary" all until 8:00. Thn i dit it manually ..

ok i think i found it
it's the cronjob..
Something is going wrong and oscam doesn't come up again
since i do not want to use cronjob as is i tried to alter it...

Cron for user xxx not found same for root user but when i do a cat /etc/crontab isee it there...
Any help?

Quote from pegaman

ok i think i found it
it's the cronjob..
Something is going wrong and oscam doesn't come up again
since i do not want to use cronjob as is i tried to alter it...

Cron for user xxx not found same for root user but when i do a cat /etc/crontab isee it there...
Any help?

ok

seems like talking to myself here :)

i found it...
i edited et/crontab file and deleted some stuff
let's see if it works
basically won't reboot at all

see my post here: http://linuxsat-support.com/li…rfox0786-4.html#post43548
These are the edits to fix crontab.

Quote from Ten Below

Madhatter your omnikey will work 100% following that guide.

Code

protocol                      = pcsc
device                        = 0

sorry i bought one omnikey and installed & i follow the steps (how to install omnikey in ubintu ) but reader not reading cards . any set up in cccam cfg file & oscam . i have smargo also that reading card. & anythiing edit oscam server then card details disapear then smargo not working then i format computer again install ubuntu & cccam server. how to edit oscam ? i am using gedit or text editer could u pls replay for me .( 50 times more i format my computer)

Excellent script. Thank you. Looking forward to installing it.

Just a quick question, is it possible to remove the part which sets up the static IP? Which part would I delete from the file to prevent it setting a static IP?

might sound crazy but that's it just let it run

Say yes to everything and proftpd as standalone

Set yr IPs here now carefully

Hi, thanks for this tutorial, working great...however my internet connection is`nt.
I have entered the incorrect IPs during the script setup.(see underlined)
Can you point me too the right config file so i can change accordingly.
Many thanks

many thanks for the reply, now sorted, im finally getting my head around this....

Next question. I have the auto script installed, static IP address fixed, connection to dyndns.org working and resolving, ssh connection working...
i`ll be adding the oscam config files soon, however i`m unsure of port forwarding. I think i need to close all ports to the server apart from
1. for dyndns to communicate on both protocols ( my router vmdg280 doesnt have specific dyndns settings)
2. for oscam to run on both protocols

So my thinking is close all ports apart from 2 !!!

I this right ?, any help greatly appreciated

hi there,
thank you very much for the auto script youve made but i have a little bit of problem in the oscam(cccam config).It kept showing me:
2012/04/17 02:40:12 0 s cccam: Bind request failed, waiting another 4 seconds
2012/04/17 02:40:13 0 share-update [1] 2954544936 0
2012/04/17 02:40:13 0 reported/updated +0/-0/dup 0 of 0 cards to sharelist
2012/04/17 02:40:13 0 share-updater mode=initfast t=1s i=30
2012/04/17 02:40:13 0 s cccam: Bind request failed, waiting another 3 seconds
2012/04/17 02:40:14 0 share-updater mode=initfast t=1s i=29
2012/04/17 02:40:14 0 s cccam: Bind request failed, waiting another 2 seconds
2012/04/17 02:40:15 0 share-updater mode=initfast t=1s i=28
2012/04/17 02:40:15 0 s cccam: Bind request failed, waiting another 1 seconds
2012/04/17 02:40:16 0 share-updater mode=initfast t=1s i=27
2012/04/17 02:40:16 0 s cccam: Bind request failed, giving up

i have netstat my server but i noticed that no program is using the port.below are the configs:

[global]
serverip = 192.18.1.5
usrfile = /var/camlogs/oscam/oscamuser.log
logfile = /var/camlogs/oscam/oscam.log
cwlogdir = /var/camlogs/oscam/cw.log
emmlogdir = /var/camlogs/oscam/emm.log
disableuserfile = 0
loghistorysize = 2048
usrfileflag = 1
bindwait = 5
nice = 0
maxlogsize = 2048
saveinithistory = 1
dropdups = 1
lb_savepath = /var/camlogs/oscam

[monitor]
serverip = 192.168.1.5
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[cs357x]
port = 31337
serverip = 192.168.1.5

[cs378x]
port = 31337
serverip = 192.168.1.5

[cccam]
port = 5338
serverip = 192.168.1.5
reshare = 2
forward_origin_card = 1
version = 2.0.11
stealth = 1
nodeid = D9046220102513C8

i have ps- auxwww and this are the results

root 28745 0.0 0.0 5324 220 ? Ss 02:49 0:00 ./oscam.x86 -b -c /var/etc/config -r 1 -d 1
root 28746 0.0 0.2 24760 2824 ? Sl 02:49 0:00 ./oscam.x86 -b -c /var/etc/config -r 1 -d 1

whenever i restart the oscam,still there are 2 running even after ive killall the oscam.

Appreciate you guys could help me out.Thank you

When I try to copy ubuntu_cccam_package folder and the UbuntuInstall.sh into root/tmp/, I get erroe that I do not have permission as I did not create folder, Plz help... And one other thing, where we see "OWNER=card" and change card to the username of your system install. Is this the username or login name? My Login name was chris, but my username was slyfox??

Please advise as this is my 4th attempt and im cracking up..

Thanks..

Quote from silverfox0786

Finally got my Finger out and present Version 1

please report bugs and other things here

Release Note

Here is a brilliant script for installed the full works OScam & CCcam server on an Ubuntu x86 Install

This package consists of OScam 6180 and CCcam 2.13

This package is CCcam.x86 and standard smargo cfg and OScamx86 will standard CFG for smargo and pre setup to work as CCCAM, Newcamd and Camd35 servers

As an added bonus i have also put into the install the option to address and add a fixed ip address to the server and also symlinks so when you ftp into the server you will go to home as standard and will find little symlinks sitting there taking to to logs binarys and configs

So first things first if not already done so download and install Ubuntu x86 10.10
get it from here

Code

http://www.ubuntu.com/desktop/get-ubuntu/download

for a USB Stick install download pendrive linux from here

Code

http://www.pendrivelinux.com/

whilst that is downloading/installing you will need to do a few things before you can begin

you will need to open up in text editor the serverinstall.sh file then within the linux_softcam_pack folder open LogCleanUp.sh and configupdate.sh [that's 3 script files]
at the top ish of the script you will see OWNER=card change card to the username of your system install that is on all 3 script files
Then...
decide on a fixed IP address you want to use keep it in mind
Now open up folder within linux_softcam_pack called www
Now open in text editor config.php
There you will see and IP address 192.168.x.x change the x to the ip address you decided on
the bottom line you will see a password xxx change that to your liking

now that's all done you are ready to go. Place the extracted ubuntu_cccam_package folder and the UbuntuInstall.sh into root/tmp/
you must log into root via sudo -I as bellow
open telnet session

Code

card@ubuntu:~$ sudo -I
[sudo] password for ubuntu: >fill in your password.<
root@ubuntu:~# chmod 755 /tmp/serverinstall.sh
root@ubuntu:~# /tmp/serverinstall.sh

might sound crazy but that's it just let it run

Say yes to everything and proftpd as standalone

Set yr IPs here now carefully

your pc will auto restart once done then that's it all is well you will find all relevant items installed and oscam & cccam running

plug in yr smargo reader without card and perform in telnet

Code

card@ubuntu:~$ lsusb

look for an output similar to this

Code

Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

then

Code

card@ubuntu:~$ dmesg

look for an output similar to this

Code

[   23.529481] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0

This means smargo is all working then just configure your config file so it will actually read the card your gonna use

Now to explain the cronjobs that are added

CCcam/OScam shuts down at 5:55 AM allowing for the jobs bellow
The users/peers/server are backed up at 5.56 AM in /var/cccamlogs
When you want to change the config it can be done ones a day and its automatic at 5:57 AM just place new config file in folder var/config. A backup of your old config will be placed in var/backup
keyupdate ones a night at 5:58 AM
Then CCcam starts again at 5:59 AM

This server checks CCcam every 6 min with a check script, and when it has to restart
it writes a log named CCcam.check in /var/cccamlog
and it starts CCcam in debug and writes the a CCcam.log
This can create big logs that's why there is also a log cleanup script that cleans the logs ones a week. at 06:05 AM

please do not change any setting or times on the cron tasks they must remain as they are or you will suffer server problems and Oscam/CCcam will be out of sync and will not run correctly a 6 min check interval and a 5 min task cronjob will keep in sync so Oscam/CCCam will check at 5:54 AM At 5:55 AM CCcam will stop Allcronjobs will take place and Oscam/CCcam will restart at 5:59 AM and next check will be at 6:00 AM so the cron job must complete within the check time frame. or it will report as CCcam not working and everything will crash. then a weekly cleanup at 6:05 AM and another check at 6:06 AM

CCaminfo.php by TooGoody v1.02

This every one should know what it is and what it does

To use it open up firefox and type in the IP of your Server the password you set in config.php and away you go you can see all your server details in one swoop

on any machine on yr local network you can open up any Internet browser and type the IP of your server and you will get the CCcaminfo page open up

Once this all configured u will never realy have to ever attach it to a keyboard,mouse or monitor...

SHH/Telnet and ftp will work straight off just use yr machine username and password and if u wanna go one more step then set up remote desktop on Ubuntu and use realVNC to access its DestopGUI :thumbsup:

Display More

not working nline in cccam 213
i have installed but not working nlines
clines working good and my local working
plz send me sollution

has anyone else encountered problem with oscam on this script, this is message from log

Sat Nov 17 14:06:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:18:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:24:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:30:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:36:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:42:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:48:02 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 14:54:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary
Sat Nov 17 15:00:01 GMT 2012: Couldn't find oscam.x86 running. Restarting server-binary

any ideas?

***FIX**** run this

apt-get install libssl0.9.8