VIX issues with cams!

Last night at 2am I was pretty bored so I decided to give VIX another go!

My first issue is OSCam & CCcam just don't want to work with my Sly & JSC cards running together so I thought, forget that for the minute and stuck my cards into the Duo so its working as the server...

After deleting the configs on the Ultimo, I reinstalled OSCam & CCcam and just put a simple cccam.cfg file on the box...

It has 2 N lines to my 2 cards in the Duo and a C line for shares from peers via the Duo...

Everything *looks* setup fine, I can see the cards active in CCcam....

If I delete the C line, I get nothing....here are my OSCam logs -

2012/01/26 11:25:58 75E008D0 r Error processing ecm for caid 0963, srvid 0F0D (servicename: *** Atlantic HD) on reader ***uk.
2012/01/26 11:25:58 75E008D0 r ERROR in IO_Serial_Write u=0 to_send=5 (errno=0 Success)
2012/01/26 11:25:58 75E008D0 r ERROR in IO_Serial_Write u=0 to_send=5 (errno=0 Success)
2012/01/26 11:25:58 75E008D0 r [videoguard2-reader] classD0 ins40: (-2) status not ok ac e8
2012/01/26 11:25:58 75E008D0 r Error processing ecm for caid 0963, srvid 0F0D (servicename: *** Atlantic HD) on reader ***uk.
2012/01/26 11:25:58 75E06C00 c test1 (0963&000000/0F0D/80:8427): not found (2501 ms) by ***uk

Does anyone with Sly & JSC Sports having a working config as I'm out of ideas (and I've tried every possible permutation I can think of!)

Quote from master G

In softcam ci set Oscam to autostart first then CCcam, try these configs and IPK i made.

Thanks MG but no dice unfortunately...no ecms are served for some weird reason....

I'll have to stick BH back on as I can't have the downtime!! I'll maybe have to build a server at some point soon....

Quote from cazuela

sandman --if you have 2 boxes ,then why not simply use the one that you´re NOT experimenting with as a server ;)

thats what I was doing!

Problem then was the Ultimo wouldn't read N lines from the Duo (server)! All I could get was a C line....

very odd....

For my sins I've decided to revisit this today....what a mistake! ;)

Summary -

* I've installed the latest VIX OSCam/CCcam from the Linuxsat Support repo on TS Panel
* I've enabled OSCam & CCcam in the Softcam Manager
* I have Sly UK and JSC Sports cards

No matter how I edit my configs I can't see any cards active in CCcam -

|127.0.0.1:xxxxx | |newcamd | | | 0 | |
|127.0.0.1:xxxxx | |newcamd | | | 0 | |

I can see the channels fine but 'Server' in the infopanel says "Server: /dev/sci0" rather than 'network'?

OSCam simply says -

2012/02/23 11:10:24 0 s waiting for local card init
2012/02/23 11:10:24 76B09B08 r ERROR opening device /dev/sci0
2012/02/23 11:10:24 76B09B08 r Cannot open device: /dev/sci0

and says I have no entitlements...

Any ideas??

No matter what way I have the newcamd lines in my OSCam.conf it doesn't work! I've also removed one card and kept the other...no dice!

My configs are total bog standard but here they are -

OSCam.conf

[global]
nice = -1
logfile = /var/log/oscam.log
maxlogsize = 1024
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1




[webif]
httpport = xxxxx
httpuser = xxxx
httppwd = xxxx
httprefresh = 5
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0 - 192.168.255.255
debug = 255




[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;15001@0500:42400

OSCam.server

[reader]
label = SLYUK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963




[reader]
label = JSC
protocol = internal
detect = CD
device = /dev/sci1
emmcache = 1,3,2
group = 2
caid = 0500

OSCam.user

[account]
user = xxxx
pwd = xxxx
monlevel = 0
uniq = 0
group = 1
au = SLYUK
caid = 0963




[account]
user = xxxx
pwd = xxxx
group = 2
au = JSC
caid = 0500

CCcam.cfg also has a relevant N line...

After enabling OSCam to autostart and rebooting...then enabling CCcam to autostart and once again rebooting I sort of have it getting there...

Now in OSCam, for my Sly UK card it says "ERROR (no entitlements)"

I've then removed the cards and put them back in 1 by 1 and refreshed the entitlements in OSCam (which seemed to progress) and rebooted (for good measure)

its now working....cue Benny Hill music!! beer10

Quote from master G

You may have already tried this, swap the cards to opposite slots and edit your configs accordingly, restart oscam first, then CCcam.

If that doesnt work install oscam and CCcam as separate EMU, start oscam first then CCcam.

Cheers for replying MG...I seem to have sorted it...time for some Yoga!!