I have checked the newcamd.list file it is ok..
I am using a Gigablue Quad Plus with Openmips 4.3
After having a box failure factory reset my box and finally managed to install my softcam
placed the newcamd.list in usr/keys
I don't know what ese to do..
MGCamD Not working?
- commgames
- Thread is marked as Resolved.
-
-
You also need a properly configured mg_cfg.. Try using the attached configs..
-
Thanks a lot, your a star..
- - - Updated - - -
Is there a way to improve freezing and slow decryption?
-
There isn`t much else you can do to play with those configs.. If you are still experiencing problems it will be at the server level and nothing you can do about it unfortunately... You can ignore and prioritize certain packages, but i dunno if that will improve things for you..
-
Are there differences between the cams?
Ones that work better than another? -
No difference if you are only a client to a server. MGCamd is as basic as it gets and easy to configure. CCcam and OSCam do take a little more configuration, but won`t improve freezing if its a problem at the server level...
If you have issues with MGCamd then expect the same with the other softcams.. -
its just that, here we have a 6Mb connection and 20 devices in the house connected to wifi
That might be a problem? -
its just that, here we have a 6Mb connection and 20 devices in the house connected to wifi
That might be a problem?look into giving the stb a certain amount of upload in download set by router to ip of STB ;)
quality of sevice (QOS) can do this :) i use it via DDWRT firmware installed onto my router
but netgear in many others give this facility , whay is your netwrork set up ie router make in model ? -
Here is my setup
I live in a 4Bed/2 Living room set up
we have Gigablue Quad Plus in L1, Amiko Alien 2 in L2 & B1
Plus Optibox Spider HD in the Other 3 BedroomsIn my Living room L1 I have a Motorised System, all the rest are on Fixed 28.2 Dish through a Multiswitch
My box in L1 is wired to the D1000 modem, while the rest are wired from 2 separate Routers in the attic (Mainly for 2 reasons, No wireless signals can penetrate the attic and only 3 ethernet ports on router)
Which means 1 for the gigablue, 2 for the attic routers, 3 for my blu-ray and 4 for my games console.For some unknown reason the gigablue wouldn't respond it had its logo fluttering away in the top left corner for hours
so i switch the box on and off via the button on the rear and there was still no response, my main viewing is 19.2 and channels seem to work fine
After a reset and it seems i am finally back to normal apart from channels are not descrambling as quickly or as reliably as normal,
plus (don't know if it has something to do with it) when viewing channels it used to come up with a little box at top left hand corner
something along the lines of - NDS CW IRD plus a few more to let me know it was doing something now the only thing i can get is germany, which freezes once in a while or others like spain and france which stay black..,
MGCamd Support Forum
Configs, discussion, downloads and guides for MGCamd Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!