How to watch powervu with stream relay enabled |detail tutorial|

There are 11 replies in this Thread which was already clicked 12,839 times. The last Post () by Abdullahkhan.007.

    how to watch powervu with streamrelay enabled





    Hi mates, as we are all aware, powervu works in oscam-emu without stream relay enabled on dreambox. However, most of us use the VU+ model of boxes and stream relay has to be enabled and also add the channel url to your channel list.


    Oscam Emu now support opening of PowerVu channels in Enigma2 through "Stream Relay method". Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma2. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2. So, the stream relay needs a fast CPU. For example, CPU usage on VU+ Duo2 for SD Channel 5% & for HD Channel is 15%. Not every STB is fast enough. So only those receivers will be suitable which have powerful CPUs, like Vu+ Solo2, Duo2 etc (credits engineerkhan15).


    SCAN YOUR CHANNELS

    At this point it is assumed that the preliminary steps needed to setup your box has been done and box is ready to be scanned with Powervu channels, always remember to use the latest satellite.xml file in etc/tuxbox/ whereas in PLI images its etc/enigma2


    ENABLE INCLUDE ECM IN HTTP STREAMS


    Now we need to enable ecm in https streams, which is not available to most images and hence cannot be used for powervu with stream relay method, openATV, openPLI support that and hence suitable for watching powervu


    HOW TO INCLUDE ECM IN HTTP STREAMS


    Type the ip of your box in your browser e.g. 192.168.0.103
    Then go to settings, customise, include ecm in https streams
    The picture below explains everything
    0c9ebc1e57.jpg


    ADD STREAM URL TO YOUR CHANNEL LIST
    This is also pretty simple but you need to pay a little attention,
    Type the ip of your box in your browser e.g. 192.168.0.103
    Then select your powervu channels you want to add stream url, then click on that TV sign on your left-hand side to download the stream of the channels
    The picture explains everything
    e6c4d9cc79660c2.jpg


    d28877d02796d00.jpg


    Now import your channel list with dreambox edit channel editor
    Now in the “TV USER BOUQUET DETAILS” column, write click HD SPORTS (am using as an example) select IPTV and other streaming services and click add.
    The created channel list will be added to your list and you can send to your box
    Sometimes when you get errors you will have to
    Init 4
    Init 3
    Stop and start enigma respectively.
    I have attached a channel list with converted channels,you can load to your box


    71f6410b2804c81df2.jpg
    ef01d.jpg
    d31249da7f.jpg




    INSTALL YOUR OSCAM-EMU AND CONFIGS

    This has been dealt with severally but once again let me point things out
    Install oscam from softcam panel, it’s the best for beginners, am using openATV so this is how it goes
    telnet to your box and type


    Quote

    Mipsel
    touch /etc/opkg/secret-feed.conf
    echo 'src/gz secret-feeds http://secret.mynonpublic.com/mipsel' >> /etc/opkg/secret-feed.conf
    exit


    Quote

    SH4
    touch /etc/opkg/secret-feed.conf
    echo 'src/gz secret-feeds http://secret.mynonpublic.com/sh4' >> /etc/opkg/secret-feed.conf
    exit


    Quote

    Arm cpu
    touch /etc/opkg/secret-feed.conf
    echo 'src/gz secret-feeds http://secret.mynonpublic.com/arm2' >> /etc/opkg/secret-feed.conf
    exit


    go to plugins, download plugins and softcam feed should be there, download oscam-emu from the feeds and replace with the latest version
    openATV bin file in /usr/bin attribute 755
    config files in usr/keys attributes 644
    the script file in etc attributes 755
    We are all used to config files being in /etc/tuxbox/config/ so u can change that in script e.g.


    Code
    emuname = oscam_atv_emu powervu
binname = oscam_atv_emu
startcam = /usr/bin/oscam_atv_emu -b -r 2 -c /etc/tuxbox/config/oscam_atv_emu
stopcam = killall -9 oscam_atv_emu


    emmname: how the name should appear on softcam panel
    binname: the name of the bin file
    -c /etc/tuxbox/config/oscam_atv_emu change to whatever suits you and do a restart of your box
    I will attach all my configs at the end of the post, so am not talking about configs.


    SOFTCAM.KEY
    P 009E0001 00 XXXXXXXXXXXXXX ;AFN Sports,9.0E, 11804
    P 009E0001 01 XXXXXXXXXXXXXX ;AFN Sports,9.0E, 11804
    P 009E0002 00 XXXXXXXXXXXXXX ;AFN Prime Atlantic Benelux,9.0E, 11804
    P 009E0002 01 XXXXXXXXXXXXXX ;AFN Prime Atlantic Benelux,9.0E, 11804
    P 009E0003 00 XXXXXXXXXXXXXX ;AFN Spectrum,9.0E, 11804
    P 009E0003 01 XXXXXXXXXXXXXX ;AFN Spectrum,9.0E, 11804
    P 009E0004 00 XXXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
    P 009E0004 01 XXXXXXXXXXXXXX ;AFN Prime Pacific,9.0E, 11804
    P 009E0005 00 XXXXXXXXXXXXXX ;AFN News,9.0E, 11804
    P 009E0005 01 XXXXXXXXXXXXXX ;AFN News,9.0E, 11804
    P 009E0006 00 XXXXXXXXXXXXXX ;AFN Sports 2,9.0E, 11804
    P 009E0006 01 XXXXXXXXXXXXXX ;AFN Sports 2,9.0E, 11804
    P 009E0007 00 XXXXXXXXXXXXXX ;AFN Guide,9.0E, 11804
    P 009E0007 01 XXXXXXXXXXXXXX ;AFN Guide,9.0E, 11804
    P 009E0008 00 XXXXXXXXXXXXXX ;AFN Family,9.0E, 11804
    P 009E0008 01 XXXXXXXXXXXXXX ;AFN Family,9.0E, 11804
    P 009E000A 00 XXXXXXXXXXXXXX ;AFN Movie Channel,9.0E, 11804
    P 009E000A 01 XXXXXXXXXXXXXX ;AFN Movie Channel,9.0E, 11804
    P 009E000B 00 XXXXXXXXXXXXXX ;AFN Sports HD,9.0E, 11804
    P 009E000B 01 XXXXXXXXXXXXXX ;AFN Sports HD,9.0E, 11804


    P 009E000B ; 009E SID OF THE CHANNEL IN HEX


    XXXXXXXXXXXXXX ; ECM KEY
    This is how your keys will look like if you want autoroll to work for you,softcam.key file is also located in the configs folder etc/tuxbox/config/oscam_atv_emu




    AUTO ROLLING
    Auto rolling is working very well, you will have to search around for the emm key and stay on a channel for sometime for keys to be updated on softcam.Key
    P 009E XXXXXXXX XXXXXXXXXXXXXXX ; EMM Key 9.0E, 11766, 11804
    P 009E XXXXXXXX XXXXXXXXXXXXXXX ; EMM Key 9.0E, 11766, 11804
    P 009E XXXXXXXX XXXXXXXXXXXXXXX ; EMM Key 9.0E, 11766, 11804


    Once you see a line like this


    (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
    (reader) emulator [emu] EMM: reader_caid 0000 != emmpid caid 0E01 -> SKIP!


    Just relax, keys will be written to softcam key shortly,
    After adding keys your softcam.key will look like this


    P 9E0006 00 XXXXXXXXXXXX ; added by OSEmu Fri Feb 10 21:02:06 2017 UA: XXXXXX

    P 9E0007 00 XXXXXXXXXXXX ; added by OSEmu Fri Feb 10 21:02:06 2017 UA: XXXXXX

    P 9E0008 00 XXXXXXXXXXXX ; added by OSEmu Fri Feb 10 21:02:06 2017 UA: XXXXXX

    P 9E000A 00 XXXXXXXXXXXX ; added by OSEmu Fri Feb 10 21:02:06 2017 UA: XXXXXX

    P 9E000B 00 XXXXXXXXXXXX ; added by OSEmu Fri Feb 10 21:02:06 2017 UA: XXXXXX


    Enjoy
    esuo2

    Hi esuo.I used your oscam conf.Unfortunately i always have the same issue .I cant see the Discovery channels at 4.8E/0.8W!I have no problems with AFN channels.(also HD)


    These are my logs:


    Diva Romania is OK



    On my oscam conf i have these values:

    Code
    [streamrelay]
stream_emm_enabled = 1
stream_relay_enabled = 800


    Hw can i fix it?THX in advance.

    yes i used your list, oscam reports all of the other afn channels as having the correct key and open as normal if i switch to the stream relay counterparts, this channel doesn't say its clearing in the normal list. Very odd as i've checked my softcam and the keys are ok for P 9E0008 00.

    Quote from ettore88

    Hi esuo.I used your oscam conf.Unfortunately i always have the same issue .I cant see the Discovery channels at 4.8E/0.8W!I have no problems with AFN channels.(also HD)


    On my oscam conf i have these values:

    Code
    [streamrelay]
stream_emm_enabled = 1
stream_relay_enabled = 800


    Hw can i fix it?THX in advance.


    Those channels have much higher bandwidth, so you may need to adjust your delay...

    Code
    stream_relay_enabled = 1
stream_ecm_delay              = 1201


    - - - Updated - - -


    Quote from Cdg859

    yes i used your list, oscam reports all of the other afn channels as having the correct key and open as normal if i switch to the stream relay counterparts, this channel doesn't say its clearing in the normal list. Very odd as i've checked my softcam and the keys are ok for P 9E0008 00.


    All channels working fine - double check your config.

    Any chance of helping me figure this out? New to oscam but here is what the webif is saying on a channel


    I'm using this for pvu in the usa and I have a key file but not sure if the format for it is correct but I'm trying to get this going and oscam does try to decrypt this channel


    2017/02/25 21:12:38 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:6204A4D1CFE9B13C03524685BB07BEB4): rejected group (1 ms) - MSNBC HD (no matching reader)
    2017/02/25 21:12:39 0AEF0C52 r (reader) emulator [emu] creating thread for device emulator
    2017/02/25 21:12:39 38465A71 r [Emu] reading key file: /etc/tuxbox/config/softcam.key
    2017/02/25 21:12:39 38465A71 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
    2017/02/25 21:12:39 38465A71 r (reader) emulator [emu] card detected
    2017/02/25 21:12:40 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:CD5A01A11D44BDF01A34274CECE77A7C): rejected group (1 ms) - MSNBC HD (no matching reader)
    2017/02/25 21:12:40 38465A71 r (reader) emulator [emu] found card system emu
    2017/02/25 21:12:40 38465A71 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2017/02/25 21:12:40 38465A71 r [Emu] reading key file: /etc/tuxbox/config/softcam.key
    2017/02/25 21:12:40 70778BEF c (dvbapi) Demuxer 0 restarting decodingrequests after 500 ms with 1 enabled and 0 disabled ecmpids!
    2017/02/25 21:12:40 70778BEF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1775 ANY CHID PMTPID 13BF VPID 0226
    2017/02/25 21:12:41 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:5798F3BF7925D0EBA8FC23DF22597714): found (1 ms) by emulator - MSNBC HD
    2017/02/25 21:12:41 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:25EC54BFE8E111A423E5B4526708782B): found (1 ms) by emulator - MSNBC HD
    2017/02/25 21:12:42 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:2390E5FF651BC47382362561D4F9E2F9): found (1 ms) by emulator - MSNBC HD
    2017/02/25 21:12:43 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:F6C2ED98E1E816C9F656D5C09BF6B32E): found (0 ms) by emulator - MSNBC HD
    2017/02/25 21:12:44 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:44DCDEC0A759F40AB73DB7C23B0C1294): found (0 ms) by emulator - MSNBC HD
    2017/02/25 21:12:45 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:08A2CB7DB067220871D4E41554D6424C): found (0 ms) by emulator - MSNBC HD
    2017/02/25 21:12:46 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:198D5407CD63993ABDFFD9746FCE9936): found (0 ms) by emulator - MSNBC HD
    2017/02/25 21:12:47 70778BEF c (ecm) linuxsatsupport (0E00@000000/0000/0037/40:255ABC9AB2B78D36BC05AB45A1D0BFB1): found (0 ms) by emulator - MSNBC HD


    any help is appreciated thanks.


    btw this is running enigma2-plugin-softcams-dream-elite-6.0-oscam-emu-11293.deb on a dm900

    Edited once, last by Sivart ().

    One last question master G

    In my [Streamrelay] the streamrelay=0 so should it be =1??? as of the users above?
    And they have also enabled stream_emm_enabled=1 and some has set their stream relay enabled=800 and =1201.

    So should I do the same to watch AFN package or not?

    Kindly elaborate.

    It is sad i have to point out the obvious, but...


    streamrelay=0 (disabled) means DO NOT USE STREAM RELAY method and use internal hardware decoders

    streamrelay=1 (enabled) means use stream relay method and DO NOT USE internal hardware dceoders

    This method is necessary when you do not have drivers which support HW decoding of DES


    For the Alien2 (spark7162) you need to use my image (or use my drivers with another image) in order to watch powervu channels using DES without stream relay. Powervu channels using CSA should work on most images using the internal hardware decoder.

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login