Maybe I can help by teamviewer....let me know when you will be free tomorrow
PM me your skype id.
Maybe I can help by teamviewer....let me know when you will be free tomorrow
PM me your skype id.
with my softcam key AFN channels run perfect
where can i find your softcam key.
where can i find your softcam key.
thanks master g
Display MoreWhat receiver are you using??
working fine here with Sim-2 Dm800se using PLI-4 image & latest keys
It is Amiko Alien 2 clone an sh4 type receiver with a 7162 chip.
Which Satellite`s channel did you post?
AFN on 9° east - HDsports
can you not get a PLi-4 image for your receiver? & i can try help you with configs etc...
I just need some expert guidance that`s why I`m here and that`s why this forum was made in the first place to guide the inexperienced. Not to humiliate them by ignoring them and their posts.
This forum was set up to share information and experience from the goodwill of fellow users.
Borrowing your expression that even a simpleton can see that you have been given A1 treatment and diverse suggestions/recommendations.
If you consider that a measly 6 to 8 hours is a lot of time spent, my understanding of this is you are missing the point of this hobby.
In fact to the point that I consider you are looking for something for nothing and feel somehow deceived or let down.
Arrogant keyboard warriors are "persona non-grata" on this site either so I suggest you take a step back,
look at what you have/haven´t achieved to date.
If you do not feel comfortable on this site then you are as free to leave as you were to enter.
This is where it ends and I do not expect a reply to this post.
Enough is enough.
Display MoreDisplay MoreWhat receiver are you using??
working fine here with Sim-2 Dm800se using PLI-4 image & latest keys
It is Amiko Alien 2 clone an sh4 type receiver with a 7162 chip.
Which Satellite`s channel did you post?
AFN on 9° east - HDsports
can you not get a PLi-4 image for your receiver? & i can try help you with configs etc...
The reason I was absent from this forum was because I searched Pakistani forums for this issue but even they could not come up with a solution.
As Douglas Adams said:
So I`m still positive that I`ll find a solution for Open ATV and create history.
perhaps they could not come up with a solution because there is no solution.
Well, there is a solution but you dont want to install a different image.
Perhaps you can come back when you find your solution and create history and tell us all about it.
Display MoreDisplay MoreDisplay MoreWhat receiver are you using??
working fine here with Sim-2 Dm800se using PLI-4 image & latest keys
It is Amiko Alien 2 clone an sh4 type receiver with a 7162 chip.
Which Satellite`s channel did you post?
AFN on 9° east - HDsports
can you not get a PLi-4 image for your receiver? & i can try help you with configs etc...
The reason I was absent from this forum was because I searched Pakistani forums for this issue but even they could not come up with a solution.
As Douglas Adams said:
“Let's think the unthinkable, let's do the undoable. Let us prepare to grapple with the ineffable itself, and see if we may not eff it after all.”
― Douglas Adams, Dirk Gently's Holistic Detective AgencySo I`m still positive that I`ll find a solution for Open ATV and create history.
I have not personally tested, but It apparently has been done : HDMU_16389_E2_spark7162_217_git_581 + HW DES Drivers
If it does not work for you, you need to post output from serial port. Sorry, I do not have time to give a detailed how-to, but the info is already posted on this site.
These are the PIDs of Atlantic Channel on 9e.
And this is how my keys are arranged e.g. Atlantic Channel
P 00090002 00 91XXXXXXXXXX86 ;AFN Prime Atlantic Benelux,9.0E, 11804
P 00090002 01 80XXXXXXXXXXA4 ;AFN Prime Atlantic Benelux,9.0E, 11804
So should I replace 04ec which is the VIDEO PID with 0009 in SoftCam.key file?
I`m sure something is wrong with how my keys are arranged. If they are alright kindly tell me.
0009 in SoftCam.key is group id for 9East channels
QuoteCodeDisplay MorePowerVU config ============== Keys in SoftCam.Key: P <groupid><srvid> <nb> <key> Where: groupid = any 4 hex digits of your choice for this group (leading zeros are optional) srvid = SID (Service ID) of channel in hex with leading zeros to make 4 hex digits. nb = key number (00/01) key = ecm key Example groupid=0x1, sid=0x1234, keys 00 and 01: P 00011234 00 11223344556677 P 011234 01 22334455667788 Example groupid=0x2, sid=0x34, keys 00 and 01: P 00020034 00 00112233445566 P 0020034 01 00223344556677
Display MoreIts very simple.
Ditch openatv and flash an image that joeuser has provided with the drivers included.
Then you don`t need to setup stream relay.
There isn`t anymore support we can offer you with openatv.
We`re here to help you help yourself, not do everything for you.
This is the problem. Why can`t the experts make 9e channels work on Open ATV? What kind of E2 experts are they? That they can`t solve such a small problem.
Lets wait for a few more days if a genius could come up with a solution.
And btw can you tell joeuser that his method of putting the drivers crashed the image because that`s the last option left to take help from.
And I am sure that the amount of time I`m giving, the dedication I`m showing and by the posts I`ve shared above even a simpleton would recognize that I am busting my bottom to get this method to work. I`m sitting 6-8 hours at a stretch just to make AFN work on Open ATV so clearly I don`t need spoon feeding and neither do I want one, I just need some expert guidance that`s why I`m here and that`s why this forum was made in the first place to guide the inexperienced. Not to humiliate them by ignoring them and their posts.
And it is said that an hour`s conversation with a learned man is better than reading one full month of books. So that is why I`m here. Because I respect experience, experienced people and I love learning. And I hope someone will help me with this issue and very soon I`ll post a screen shot of channel from AFN package and this thread could be happily closed by you.
Till I find success I`ll keep on the hard work.
why cant you just use whats been given ?
on a side note it works with given image just bite bullet in use it nah lol
I'm using latest OSCam-Emu (r11400) on DM500HD OpenPLi 4 and until yesterday only this keys were ok for AFN channels (9E):
Since today, emu-decoding of AFN chann's isn't possible, with notice in OSCam-Emu's Live-Log, like:
So. looks like 00-key is changed.
There are many SoftCam's with wrong/outdated data present, so maybe someone knows and can confirm the correct PowerVu keys for AFN channels? Thanks...
I have the same resiver 500HD all the same with you image and emu Oscam
Try to get the keys from ; Softcam & mr keys update by informed®
and watch the channels through the list of powervu with stream relay.
It works fine with the last keys of the enigma1969.
VU+Zero 4K OpenATV 6.2 oscam 11392 with the modified config
I use this oscam only for AFN.For other PowerVu use a different oscam.
Thanks m8's for Your help! :thumbup:
In my case, OSCam-Emu config is of crucial importance! Below is necessary:
oscam.conf:
...
[cache]
max_time = 6
cwcycle_check_enable = 1
cwcycle_check_caid = ...
[streamrelay]
stream_relay_enabled = 0
extended_cw_api = 2
pmt_mode = 1
request_mode = 1
...
Display More
oscam.server
...
[reader]
label = OSCAM-EMU
protocol = emu
device = emulator
detect = cd
group = 2
caid = ... 0E00
ident = ... 0E00:000000
#
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
#
emmcache = 2,1,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
emu_auproviders = 0E00:000000
Display More
There's a thread about this, if someone's interested... Cheerz!
Have AFN keys changed guys?
off here using DM800se
no, is ok bud
no, is ok bud
mmmm
ill av2 check my setup m8, all was working ok last week when i tried?
Hello,
Are these channels still working?
It works for before but not anymore ;-( I don't now why.....
I have zgemma h2h.
Could somebody give me a hint, I installed the latest oscam patch emu..
Thanks for help..
Don’t have an account yet? Register yourself now and be a part of our community!