test this version for oscam and config
oscam-svn11681-Vuduo4k-emu-r798.zip
Do not add a Softcam file, but it will recognize the uploaded file in Github
test this version for oscam and config
oscam-svn11681-Vuduo4k-emu-r798.zip
Do not add a Softcam file, but it will recognize the uploaded file in Github
i tried the latest version, but i still get the bad time error.. but i know where the problem is, the time is wrong on transponder 11637 H 30000 (eutelsat 16e).. you can check it yourself if you have that satellite
for devices that use transponder time, i've tested on my receivers and the same thing happnes on both of them
hello every body.
I use the latest version of oscam (11681) on my android receiver but it takes too long to open the programs. on some programs it gets stop and I have to restart the emulator manually. I think the problem is in the config I use. Would you please give me a good config to get rid of these problems ?
look above .try my config. in oscam.server on dev you have to put the path of your softcam.key file and compile it with the right keys
Display Morehello my friend I'm sorry change the link
the new link
for enigma2
For other Device
hi,
can you and below BISs Keys to your Sofcam files?
F 0007008D 00 1111113311111133 ;RTRS (16.0°E)
F 0007008D 01 1111113311111133 ;RTRS (16.0°E)
for any device ?
I installed a new image that can use NTP time instead of transponder time, and as expected, i get no more bad time warning on oscam status. Now the channels open very quickly and don't freeze.
look above .try my config. in oscam.server on dev you have to put the path of your softcam.key file and compile it with the right keys
Thanks. I used your config but unfortunately the problems still exist
mine does the same but i change from oscam to cccam and back again
Hello there ;
I am using OpenPLİ PC TV No sound in PowerVU channels on Astra 4.9 satellite.
Thank you in advance for your help
try my config ,is use for moore
Hello there ;
I am using OpenPLİ PC TV No sound in PowerVU channels on Astra 4.9 satellite.
Thank you in advance for your help
try my config ,is use for moore
I tried a lot, unfortunately it didn't work
Display MoreHello there ;
I am using OpenPLİ PC TV No sound in PowerVU channels on Astra 4.9 satellite.
Thank you in advance for your help
try my config ,is use for moore
I tried a lot, unfortunately it didn't work
hello , one log file ?
Hello my dear managers and friends, there is a problem with the OSCAM EMU Versions 11679& 11680 & 11681 & 11682 I have later that although they are installed well, they do not work at all. And no channels are opened, not even channels that code Biss have. Dreambox 7020HD I installed and tested several images on it, but in all the images there was a problem with the OSCAM EMU version 11678 And they work well before that, but with later versions, that is 11679& 11680 & 11681 & 11682 They do not work at all. Also a point that I if the version 11678 Install on Dreambox 7020HD with any type of image, even if the file oscam.server Related to the versions 11679& 11680 & 11681 & 11682 Replace oscam.server Version 11678 and restart the dream again, the OSCAM EMU 11678 Works well and opens all channels and packages. That's why I think the problem of the file oscam.conf is. Below is the file layout oscam.conf In the version 11678 And before that, as well as in later versions, please help me how to solve this problem. I am waiting for your response. thank you
1- file layout oscam.conf the version 11678 And before
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
cccam_cfg_save = 1
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httpshowpicons = 0
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
2-file layout oscam.conf later versions of the OSCAM EMU 11678
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 6
cccam_cfg_save = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
http_style = 0
http_backround_color = #38383e
http_text_color = #1e4f8a
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
Hello there ;
I am using OpenPLİ PC TV No sound in PowerVU channels on Astra 4.9 satellite.
Thank you in advance for your help
try my config ,is use for moore
i am on vusolo2, open pli 8 and sofftcam -emu 11666 an old version,
i edited dvapi and softcam key files with jhon32 example download , and it opened pvu 4.8 immediately
Crazy question I know. In Mohamed's 11682 what is the client in webif "dreamosat"?
It looks new to the build.
Display MoreHello my dear managers and friends, there is a problem with the OSCAM EMU Versions 11679& 11680 & 11681 & 11682 I have later that although they are installed well, they do not work at all. And no channels are opened, not even channels that code Biss have. Dreambox 7020HD I installed and tested several images on it, but in all the images there was a problem with the OSCAM EMU version 11678 And they work well before that, but with later versions, that is 11679& 11680 & 11681 & 11682 They do not work at all. Also a point that I if the version 11678 Install on Dreambox 7020HD with any type of image, even if the file oscam.server Related to the versions 11679& 11680 & 11681 & 11682 Replace oscam.server Version 11678 and restart the dream again, the OSCAM EMU 11678 Works well and opens all channels and packages. That's why I think the problem of the file oscam.conf is. Below is the file layout oscam.conf In the version 11678 And before that, as well as in later versions, please help me how to solve this problem. I am waiting for your response. thank you
1- file layout oscam.conf the version 11678 And before
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
cccam_cfg_save = 1
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httpshowpicons = 0
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
2-file layout oscam.conf later versions of the OSCAM EMU 11678
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 6
cccam_cfg_save = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
http_style = 0
http_backround_color = #38383e
http_text_color = #1e4f8a
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
extended_cw_api =you can try 0,1,2 and this one disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000 it must be disablecrccws_only_for=1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
is there an update for coreelec?
oscam emu 11682
Display MoreDisplay MoreHello my dear managers and friends, there is a problem with the OSCAM EMU Versions 11679& 11680 & 11681 & 11682 I have later that although they are installed well, they do not work at all. And no channels are opened, not even channels that code Biss have. Dreambox 7020HD I installed and tested several images on it, but in all the images there was a problem with the OSCAM EMU version 11678 And they work well before that, but with later versions, that is 11679& 11680 & 11681 & 11682 They do not work at all. Also a point that I if the version 11678 Install on Dreambox 7020HD with any type of image, even if the file oscam.server Related to the versions 11679& 11680 & 11681 & 11682 Replace oscam.server Version 11678 and restart the dream again, the OSCAM EMU 11678 Works well and opens all channels and packages. That's why I think the problem of the file oscam.conf is. Below is the file layout oscam.conf In the version 11678 And before that, as well as in later versions, please help me how to solve this problem. I am waiting for your response. thank you
1- file layout oscam.conf the version 11678 And before
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
cccam_cfg_save = 1
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httpshowpicons = 0
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
2-file layout oscam.conf later versions of the OSCAM EMU 11678
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 6
cccam_cfg_save = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
http_style = 0
http_backround_color = #38383e
http_text_color = #1e4f8a
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
extended_cw_api =you can try 0,1,2 and this one disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000 it must be disablecrccws_only_for=1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
Hello dear managers and friends, I did the same thing and the change that you said, but it did not have any effect on solving my problem. Please, if you have any other suggestions and solutions, let me test it. I am waiting for your response. Thanks
Don’t have an account yet? Register yourself now and be a part of our community!