The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

There are 2,410 replies in this Thread which was already clicked 481,062 times. The last Post () by 1z1z.

    • Official Post

    It could be that the ipk has changed something in the start script (I have not checked the ipk I'm on my mobile ) or a general image issue I seem to remember from a while back. Tbh I rarely use the ipks I only ever change the........bin file and rename it the same as the old version.

    My suggestion would be to flash your backup and change just the bin file, that way the start script and your configs remain unchanged.

    I did a cleanup up the oscam-emu installation.
    Installed ver. 11702-798 from Mohamed. Placed my config files. Started it in Oscam Setup.
    Working, with webif working also.
    It starts with oscam as the selection. Auto start with cold boot working
    Downloaded just the binary file oscamsvn11711-emu from Mohamed and then Levi 45.
    Shortened the file name oscam-svn11711-osmio4k-webif-dvbapi-libusb-emu798 to oscam.
    FTP to the correct directory. Set permissions to 755. Rebooted.
    No start with the Oscam Setup selection for oscam.
    No webif. Neither Mohamed or Levi 45 will start.
    Reverted to original 11702-798 oscam. Working when rebooted. Auto start working.

    ** Change of the binary was based on the changelog. Perhaps better PV & BISS, other functionality (not using cards)?**

    So what do you think?


    Edit:
    I tried the 11704 version for AARCH64 extracted from the ipk. Placed it where it needed to be. Permissions set to 755. Shortened the name to oscam.
    Rebooted. Nope! Nothing.
    Tried just the binary from here. Nada. Zip, zilch, zingo.

    Crazy stuff. Jens, in the past I've been able to do as you told me. And it worked (usually).

    Quote from cosy
    Quote from supwiddiss

    Reverted to original 11702-798 oscam. Working when rebooted. Auto start working.

    If this one is working, why don't you stick to a working system and keep trying for what doesn't work.

    At the end, you need a working system, not what is new…

    If you refer to my comment:
    ** Change of the binary was based on the changelog. Perhaps better PV & BISS, other functionality (not using cards)?**
    As was the case with AFN some time ago. I was hoping perhaps that the changelog (which you are free to read regarding my curiosity).
    Or as is the case with the Discovery channels currently. That perhaps something in the new binary would enhance performance.
    Get it?
    I have ran the same version for a long time now. Kept the same config files. And IF you read Jens' comment, which has worked for me in the past:
    "Tbh I rarely use the ipks I only ever change the........bin file and rename it the same as the old version."
    The 2 different AARCH64 versions do not work. opkg remove <the previous version> and installing the latest version, then placing my key file.
    Just isn't working.
    I did not mention that I have just gotten my 2nd OsMio4k. This is the + version.
    OpenATV 6.4 installed and sats configured and scanned in.
    So. With a new receiver, why would you not want to try a newer version of oscam if it may give a side-by-side performance improvement/degradation comparison?
    Nevertheless. 11.711-emu-r798 ipk installs but does not work.

    Carburetors, points and condensers work too. But. What if?
    Perhaps. Fuel injection would work even a tad better?
    C'mon. You have to agree on at least this.
    "If this one is working, why don't you stick to a working system and keep trying for what doesn't work.

    At the end, you need a working system, not what is new…"

    Thank you for your comments and constructive suggestions.

    • Official Post
    Quote from supwiddiss

    Shortened the name to oscam.

    Was the old existing binary named "oscam" or something else? The new binary must be exactly the same as how the old was named or the softcam script won`t start it.


    Try starting the binary in telnet to see if its missing a required library/dependency. If it doesn`t start you`ll get an error with what`s required.

    If it starts, check how the binary is named in the softcam start script and compare it to the new oscam binary.

    Quote from master G
    Quote from supwiddiss

    Shortened the name to oscam.

    Was the old existing binary named "oscam" or something else? The new binary must be exactly the same as how the old was named or the softcam script won`t start it.


    Try starting the binary in telnet to see if its missing a required library/dependency. If it doesn`t start you`ll get an error with what`s required.

    If it starts, check how the binary is named in the softcam start script and compare it to the new oscam binary.

    Yes master g. A on my first OsMio the binary is in fact "oscam". And it starts, and auto starts after booting. Softcam Setup (red button) shows none and Oscam. usr/bin shows oscam. Kind of the same as it has been. So that is what I named the newer version(s). And it won't start.
    I'll read a bit and see if I can find how to start in telnet.
    Briefly on my working OsMio I did try both new binaries after naming the original "oscam.bak" and placing them with 755 as the premission.
    So that did not work, and then 'just because' transferred 'oscam.bak off of the receiver. Of course with init 3 and 4, and restarts.
    Let's see if I get a hint when starting with telnet.
    The start script shows oscam also. We shall see.

    Edit:

    Post #1894 here.

    RE: The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

    Looks like I'm not alone. Tried my configs as there was no reader emulator. It crashed. Can't say this has happened before, so pardon the confusion.
    Will continue trying to debug.

    This is oscam-1.20_svn-r11711-798 EMU compiled with Raspberry Pi 32bit and ALL FEATURES: need pcsc, libusb 1.0, libssl 1.1.1


    Hallo,

    i have an old dreambox 800se. Have a green tivusat card caid 1856. On my newer box ( arm ) it´s working. Need latest oscam binary with smod ( 1856fix ) for my old mipsel box. I´ve find only arm oscam smod 11711. Can sombody helpme. Thanks

    Hello i need help.

    My Tivusat card 1856 nagra merlin stopped working.

    it wont update in oscam.

    i Connected oscam client with cccam protocol to oscam 11711 who is reading the card.

    But it is not receiving any emms at all.

    card is inited fine just wont update.

    Thank you so much for your help.

    I need the i686 version to read the card. (linux pc) using a USB phoenix cardreader.

    I installed the latest version i could find v11711 just oscam not with emu but did not work.

    Tried also.

    evensa = 1 and also -1 but no luck.


    here is the log:


    2022/06/11 23:22:24 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11711 (i686-linux-gnu)

    2022/06/11 23:22:24 00000000 s (main) System name = Linux

    2022/06/11 23:22:24 00000000 s (main) Release = 3.2.0-4-686-pae

    2022/06/11 23:22:24 00000000 s (main) Version = #1 SMP Debian 3.2.51-1

    2022/06/11 23:22:24 00000000 s (main) Machine = i686

    2022/06/11 23:22:24 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2507

    2022/06/11 23:22:24 00000000 s (config) services reloaded: 0 services freed, 57 services loaded, rejected 0

    2022/06/11 23:22:24 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled

    2022/06/11 23:22:24 00000000 s (main) signal handling initialized

    2022/06/11 23:22:24 00000000 s (config) 1147 service-id's loaded in 7 ms2022/06/11 23:22:24 00000000 s (net) cccam: initialized (fd=6, port=1555)

    2022/06/11 23:22:24 00000000 s (reader) tivusat [mouse] creating thread for device /dev/ttyUSB0

    2022/06/11 23:22:24 00000000 s (main) waiting for local card init2022/06/11 23:22:25 16F1EFC0 r (reader) tivusat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)

    2022/06/11 23:22:25 16F1EFC0 r (reader) tivusat [mouse] card detected

    2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 35 30 20 52 65 76 57 36 30 14

    2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] Setting baudrate to 115200 bps

    2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] detected card in CAK7 mode

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] Rom revision: DNASP450 RevW60

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] card needs restart after 36863 CMDs

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] Card is starting in GLOBAL mode

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] ready for requests

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] found card system nagra cak7

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] ROM: D N A S P 4 5 0

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] REV: R e v W 6 0

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] SER: ###########

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] CAID: 1856

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 11 (sysid)

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] -----------------------------------------

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] |id |tier |valid from |valid to |

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] +----+--------+------------+------------+

    2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] |5411|0000 |1992/01/01 |2022/06/19 |

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] |5412|0000 |1992/01/01 |2022/06/10 |

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] -----------------------------------------

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 00 00

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 12

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] ------------------------------------------

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] | All EMM FILTERS (5) added successfully |

    2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] ------------------------------------------

    2022/06/11 23:22:29 00000000 s (main) init for all local cards done

    # oscam.conf


    [global]

    usrfile =

    logfile = /tmp/osclog.txt

    cwlogdir =

    emmlogdir = /tmp/emmlog.txt

    disablelog = 0

    disableuserfile = 1

    usrfileflag = 0

    clienttimeout = 5000

    fallbacktimeout = 2500

    clientmaxidle = 120

    failbantime = 0

    bindwait = 120

    netprio = 0

    unlockparental = 1

    nice = 99

    #serialreadertimeout = 1500

    maxlogsize = 9999

    waitforcards = 1

    preferlocalcards = 1

    #saveinithistory = 1

    readerrestartseconds = 5

    resolvegethostbyname = 0


    [cccam]

    port = 1555

    version = 2.3.0

    reshare = 3

    reshare_mode = 1



    [reader]

    label = tivusat

    enable = 1

    device = /dev/ttyUSB0

    protocol = mouse

    detect = cd

    mhz = 368

    cardmhz = 368

    caid = 183D,183E,1856

    rsakey = ...

    mod1 = ...

    key3588 = ...

    data50 = ...

    mod50 = ...

    idird = ...

    detect_seca_nagra_tunneled_card= 0

    detect = cd

    autospeed = 0

    ident = 183D:000000,005411;183E:000000,005411;1856:000000,005411,005412

    group = 1,2,3

    emmcache = 1,1,2,0

    evensa = 1

    #forceemmg = 1

    blockemm-g = 0

    blockemm-s = 0

    blockemm-u = 0

    blockemm-unknown = 1

    auprovid = 000000,005411,005412

    audisabled = 0

    nagra_read = 2

    read_old_classes = 0


    # oscam.user

    [account]

    user = updater

    pwd = mypass

    uniq = 0

    group = 1

    caid = 1856

    ident = 1856:000000,005411,005412

    au = tivusat

    keepalive = 1

    cccmaxhops =

    cccreshare =


    Many thanks for your patience :-)

    183E Tiger card used to update just fine witht this config.

    Add the keys one by one from web-inf

    ;

    Thanks but ti wont work because you put dvbapi user. and i connect from my dreambox to linux pc oscam so that wont work.

    i am looking at logs now maybe these emm filters are the problem:


    | All EMM FILTERS (5) added successfully |


    i dont understand why not one single emm is coming?

    i will try with another card tomorrow

    try with internal reader of dreambox and use the config above and just modify:

    ;

    Quote from master G
    Quote from supwiddiss

    I'll read a bit and see if I can find how to start in telnet.


    If the binary is in /usr/bin folder you would use this ~ /usr/bin/oscam -b

    It was a busy week. I flashed the latest 6.4 image and tried Mohameds 11711 ipk. It didn't install.
    Performed an opkg update and tried again. Installed and running.
    For future reference I would like to ask. Do changelog entries such and below do anything for the emu portion for pv, biss....cardless operation?
    I ask because as Jens mentioned to me before. The 798 portion of oscam has not changed in a long time.


    Changeset 11711:

    Message:


    [dvbapi] Block EMM pid 0x1FFF completely


    Changeset 11710:

    Message:


    [dvbapi] Allow ECM pid 0x1FFF for FAKE caid as well


    Changeset 11709:

    Message:


    [dvbapi] Allow ECM / EMM pid 0x1FFF only for BISS

    server (i686-linux-gnu):

    ##############

    # oscam.conf

    ...

    [cs357x]

    port = 27550


    [newcamd]

    port = 2000@1856:000000,005411,005412

    allowed = 127.0.0.1,0.0.0.0-255.255.255.255

    key = 0102030405060708091011121314

    keepalive = 1

    mgclient = 1


    [cccam]

    port = 1555

    version = 2.3.0

    reshare = 3

    reshare_mode = 1

    ...


    #############

    # oscam.server


    [reader]

    label=tivusat

    device = /dev/ttyUSB0

    protocol = mouse

    caid = 1856

    mod1 = xx

    key3588 = xx

    data50 = xx

    mod50 = xx

    evensa = 1

    ident = 1856:000000,005411,005412

    group = 1,2,3

    emmcache = 1,1,2,0

    auprovid = 005411



    client (dvb box):

    ###########

    # oscam.server


    [reader]

    label = newcamd_1856

    protocol = newcamd

    device = xxx.xx.xx.xx,2000

    key = 0102030405060708091011121314

    user = updater

    password = mypass

    caid = 1856

    ident = 1856:000000,005411,005412

    autype = 1

    group = 1

    emmcache = 1,3,2,0


    [reader]

    label = cs357x_1856

    protocol = cs357x

    device = xxx.xx.xx.xx,27550

    user = updater

    password = mypass

    caid = 1856

    ident = 1856:000000,005411,005412

    autype = 1

    group = 1

    emmcache = 1,3,2,0


    [reader]

    label = cccam_1856

    protocol = cccam

    device = xxx.xx.xx.xx,1555

    user = updater

    password = mypass

    autype = 1

    group = 1

    emmcache = 1,3,2,0

    ccckeepalive = 1

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login