sorry, if you don't use cards then i can't help you
thanks
;
There are 2,399 replies in this Thread which was already clicked 479,151 times. The last Post () by abu baniaz.
sorry, if you don't use cards then i can't help you
thanks
;
Display More[OSCam] /EMU -patched/CyCeC+/ # r11711 /mega8.1
Cayman - Cameleon - C[WPK]onax
# fix for PowerVu
Thanks @ Jej@n from SAT-4-ALL forum
It is not possible to know what the "fix for PowerVu" is according to the authors, because for me the AFN channels are unwatchable and the emms are not fixed either and when I change the channel only one ecm arrives and it stops.
to hopefully clear things up here
AFN works again, because we are now receiving regular EMC keys from other users, (who are not using e2 receiver's !!!) ,
i would imagine it is a paid for biss/pwerVU server on some Chinese STB
AU for AFN dose not work...... despite having valid EMM keys because there is still a problem with the EMM unmask mode.
The change log for the emulator part of oscam emu comes from here
The last change was in may.
As far as i am aware everyone of the forks of oscam emu, are still based the above.
To see the hardware type of your STB use this telnet command:
Display Morei don't have the position 9°E, to do tests
but i found in other forum that AFN channels hangs
with OSCam and also NCam
...???
;
no problems for me, im still using an old version as nothing in any of the change logs for oscam or emu was of any interest to me
AFN works again, because we are now receiving regular EMC keys from other users, (who are not using e2 receiver's !!!) ,
i would like to know
which non E2 receiver has this support (Pvu AU) ?
;
AFN works again, because we are now receiving regular EMC keys from other users, (who are not using e2 receiver's !!!) ,
i would like to know
which non E2 receiver has this support (Pvu AU) ?
;
I'm not sure TBH, and i doubt the receiver itself is doing it, more like a server that the receiver connects to.....
I will ask some of those that share the keys we all use now
great discovery, someday we can used this new idea of having server of our owned on this forum and sending pvu ecm keys over the network that might fix something on many many programs like discovery, afn, and others is no longer using emm anymore ..somehow only chinese know this and we gonna find out what server they use and it can be share accross entire web since oscam/ncam can reshare the keys
afn, and others is no longer using emm anymore ..
i don't think so...
can you explain more ?
;
cause emm doesn't work for afn...and not sure discovery channels its emm keys work or not, cause its giving false ecm keys from random errors that its not using right keys for group of different hash mode every second..?? it might be one or 2 keys has to fit for entire locks...i don't think they put all effort to have us think it may be newer version pv+ but i seen this before somehow, its like what every time you get ecm key from emm key...it always wrong for entire hash group..it might be a key that works for all hashes that i notice its same 4 hashmodes spitting over and over again...if afn works by internet...so as this by chinese same server that might be right key but who knows, i might not be correct on that cause this is beyond my understanding on those from 58w discovery channels...if you do recording for entire 2 hours and study for moment...you know this is not simple as i thought it be when it looks like its doing by hash group with chosen hash level that share with 2 correct ecm key that might be a permanent key or key only lasted every 48hours
Display MoreDisplay Moresupwiddiss i can't understand you
which card you want operate ? i can help you with the configs
because : 1813, 1856, 1884, 0B01 all working without problems
just the configurations differs from the versions about this: oscam-EMU-CyCeC+
use web-inf to add the keys
;
I can use a translator if it would help.
What is your native language?
I use no cards. Just the pv, biss, etc emulators.
Going by the changelog I see this.
Even though ?? what fix ??? isn't exactly mentioned or what was broken that needed fixing in the first place.
Jen's will love this one.
Doesn't ANYONE consider posting a semi-detailed changelog?
Nothing in this one mentions cards. If It did, I wouldn't be asking why an AARCH64 binary wont work when they always did in the past.
Because I don't use any stinkin' cards.
Thanks!
[OSCam] /EMU -patched/CyCeC+/ # r11711 /mega8.1
Cayman - Cameleon - C[WPK]onax
# fix for PowerVu
Thanks @ Jej@n from SAT-4-ALL forum
Me again.
Okay. Tried the version for arm 7. It works. With a hitch.
Oscam no longer auto starts. Have to start it manually every time the box is rebooted.
My workaround was to remove the ipk and reinstall it.
Then place the binary and check for 755 permissions.
Reboot the box. Start oscam. Now it's good.
Shutdown and restart. Oscam starts.
Never really had a new binary only that would bork auto start of oscam. Hmmm.
I went through the tutorial that is here for a manual install.
All before uninstalling the ipk and starting over.
Looked through the init.d files. No hints.
Box would not auto start oscam no way, no how.
Perhaps something where the pid is written??
Also uname is crippled. and lscpu.
I found that the processor is in fact armv71. Contrary to my assumptions posted above.
The osmio4k is not aarch64. Fine.
Same question asked by another......
Is there a command to find if the processor is 32 or 64 bit in terminal, telnet?
Apparently normal Linux commands aren't working. Looked for a package update or install. Nope.
I owe everyone a beer or 6. Or a whiskey.
try this command:
post the results please, this is mine:
root@vuultimo4k:~# cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 3 (v7l)
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x00f
CPU revision : 3
processor : 1
model name : ARMv7 Processor rev 3 (v7l)
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x00f
CPU revision : 3
processor : 2
model name : ARMv7 Processor rev 3 (v7l)
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x00f
CPU revision : 3
processor : 3
model name : ARMv7 Processor rev 3 (v7l)
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x00f
CPU revision : 3
Hardware : Broadcom STB (Flattened Device Tree)
Revision : 0000
Serial : 0000000000000000
root@vuultimo4k:~#
Display More
I think the vfd32 means mine is 32 bit, but not sure.
Here we go. Looks like the armv7 in in fact a 32 bit processor. We don't get into 64 bit until armv8.
Confusing? Especially when aarch64 was associated with the os mio 4k. Guess I learned something.
Now. To figure out why a binary switch would kill auto start of oscam.
You, as the say here in the deep South, "Learned me real good".
root@osmio4k:~# cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 0 (v7l)
BogoMIPS : 54.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x100
CPU revision : 0
processor : 1
model name : ARMv7 Processor rev 0 (v7l)
BogoMIPS : 54.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x42
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x100
CPU revision : 0
Hardware : Broadcom STB (Flattened Device Tree)
Revision : 0000
Serial : 0000000000000000
Display More
AFN works again, because we are now receiving regular EMC keys from other users, (who are not using e2 receiver's !!!) ,
i would like to know
which non E2 receiver has this support (Pvu AU) ?
;
I am running it on starsat 2000hd extreme and also on china 1506g ,t,f, lv, hv, goto boxes, startrack, openbox .... work on all boxes which has powervu option. but dont follow keys as softcam.
simple add with 000000 provID and 00 and 01 index key just once. no need to add with sid.
P: 000000 00 xxxxxxxxxxxxxxxx
P: 000000 01 xxxxxxxxxxxxxxxx
and works. remembers, keys change after 2 to 3 hrs. so don't try with expire.
Display MoreAFN works again, because we are now receiving regular EMC keys from other users, (who are not using e2 receiver's !!!) ,
i would like to know
which non E2 receiver has this support (Pvu AU) ?
;
I am running it on starsat 2000hd extreme and also on china 1506g ,t,f, lv, hv, goto boxes, startrack, openbox .... work on all boxes which has powervu option. but dont follow keys as softcam.
simple add with 000000 provID and 00 and 01 index key just once. no need to add with sid.
P: 000000 00 xxxxxxxxxxxxxxxx
P: 000000 01 xxxxxxxxxxxxxxxx
and works. remembers, keys change after 2 to 3 hrs. so don't try with expire.
My dear friend, are you saying these boxes also produce the keys?
Well, the issue is to identify the boxes that produce/give out (autoroll) the keys... will appreciate very much if you can tell specifically the boxes that give out the keys.
please brother we need the file NCAM-SUPCAM 12.8 in IPK version because when i installed by script the file BIN of NCAM-SUPCAM 12.8 it didn't appear in /usr/bin
please brother we need the file NCAM-SUPCAM 12.8 in IPK version because when i installed by script the file BIN of NCAM-SUPCAM 12.8 it didn't appear in /usr/bin
My dear friend, have you tried the online installation "code" by the prof. MohamedOS? It works well for all..
please brother we need the file NCAM-SUPCAM 12.8 in IPK version because when i installed by script the file BIN of NCAM-SUPCAM 12.8 it didn't appear in /usr/bin
Try this
python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
please brother we need the file NCAM-SUPCAM 12.8 in IPK version because when i installed by script the file BIN of NCAM-SUPCAM 12.8 it didn't appear in /usr/bin
Try this
python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
i put it the first time and i've this problem
Thx to MOHAMED_OS and Linuxsat, all of the various key uploaders, and all of you that helped.
the latest oscam emu build HERE , now also auto downloads AFN keys off the forum
2022/07/22 22:33:14 029B2B99 r (reader) skyuk [videoguard2] |-- 0d ---|-- 0d72 --| 2028/05/09-01:05:46 |
2022/07/22 22:33:14 029B2B99 r (reader) skyuk [videoguard2] |-- 0d ---|-- 0d73 --| 2028/05/09-01:05:46 |
2022/07/22 22:33:14 029B2B99 r (reader) skyuk [videoguard2] |-- 0e ---|-- 0e46 --| 2028/05/09-01:05:48 |
2022/07/22 22:33:14 029B2B99 r (reader) skyuk [videoguard2] |-- 0e ---|-- 0e60 --| 2028/05/09-01:05:48 |
2022/07/22 22:33:14 029B2B99 r (reader) skyuk [videoguard2] ------------------------------------------------------from-ins70--
2022/07/22 22:33:14 00000000 s (main) init for all local cards done
2022/07/22 22:33:14 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2022/07/22 22:33:14 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2022/07/22 22:33:14 00000000 s (anticasc) anti cascading disabled
2022/07/22 22:33:14 00000000 s (gbox) local gbox failed init
2022/07/22 22:33:14 12BF74C5 c (client) plain dvbapi-client granted (linuxsat25, au=auto (15 reader))
2022/07/22 22:33:14 12BF74C5 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2022/07/22 22:33:14 12BF74C5 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2022/07/22 22:33:14 12BF74C5 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2022/07/22 22:34:49 12BF74C5 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0C02 PROVID: 000000
2022/07/22 22:34:49 12BF74C5 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 17BA PROVID: 000000
2022/07/22 22:34:49 12BF74C5 c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2022/07/22 22:34:49 12BF74C5 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17BA ANY CHID PMTPID 13F0 VPID 048D
2022/07/22 22:34:49 46C845D2 r (emu) Key not found or invalid: P ****0068 01 (channel hash: 9798A8F2)
2022/07/22 22:34:49 46C845D2 r (emu) Key not found or invalid: P 0009FFFF 01
2022/07/22 22:34:50 12BF74C5 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0C02 PROVID: 000000
2022/07/22 22:34:50 12BF74C5 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 17BA PROVID: 000000
2022/07/22 22:34:50 12BF74C5 c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2022/07/22 22:34:50 46C845D2 r (emu) Find and download keys: https://www.linuxsat-support.com/thread/152939/?pageNo=2
2022/07/22 22:34:50 46C845D2 r (emu) Key loaded: P 00 1CC79A4A55AB9A ### Thanks to CHINGERSON ###
2022/07/22 22:34:50 46C845D2 r (emu) Key loaded: P 01 3C20C00E980381 ### Thanks to CHINGERSON ###
2022/07/22 22:34:50 12BF74C5 c (ecm) linuxsat25 (P: 0E00:000000:0068:17BA:0000: #ECM_L:99 #CW=0000000000000000DE9734A9F19DD05E HOP:00): found (756 ms) by emulator - AFN (lg)
Display More
Don’t have an account yet? Register yourself now and be a part of our community!