Changeset 11715
-Added new ATR
-Refresh some Prov. Info
Thanks bust3d
Thanks.. download link please!
Changeset 11715
-Added new ATR
-Refresh some Prov. Info
Thanks bust3d
Thanks.. download link please!
download link please!
latest oscam version by audi06 doesn't open AFN.
linuxsat25 does.
In new oscam is semnificatif modification?
Thank you MOHAMED_OS, all bin files are called OSCam 11715-r798, how should you install it if you want to install 2.3 cams at the same time?
When i install "OSCam V117.15 -iCam V8" by MOHAMED_OS on openATV 7 (vu+ zero and vu+ solo²) and select the new OSCam in openATV it doesnt start.
I tried with blue key then Softcam then select Softcam. Here i select the new version press green key to save but it just says "Restart softcam.... Please wait" and this is there forever.
When i install the previous version "OSCam V117.14 -iCam V6" from MOHAMED_OS and just replace the binary with the newest binary its all working fine. Seem like something is broken in the ipk ?
Also tried to install via
python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
but also same error when i select the new version is just see the screen that Softcam is restarting after savin on openATV
Display MoreImam isti slučaj i moram da dodam da moram ponovo da instaliram OS
Kada instaliram " OSCam V117.15 -iCam V8" od MOHAMED_OS na openATV 7 (vu+ zero i vu+ solo²) i odaberem novi OSCam u openATV, on se ne pokreće.
Probao sam sa plavim tasterom pa Softcam pa izaberi Softcam. Ovdje odaberem novu verziju, pritisnem zelenu tipku za spremanje, ali samo piše "Restart softcam.... Molimo pričekajte" i ovo je tu zauvijek.
Kada instaliram prethodnu verziju "OSCam V117.14 -iCam V6" sa MOHAMED_OS-a i samo zamijenim binarnu verziju najnovijom binarnom datotekom, sve radi dobro. Čini se da je nešto pokvareno u ipk-u?
Također sam pokušao instalirati preko
Codepython -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
ali isto tako ista greška kada odaberem novu verziju je samo vidjeti ekran da se Softcam ponovo pokreće nakon savin-a na openATV
I tried it with a complete fresh setup openATV 7 on a vu+ zero and the error is still the same. No chance to get it running by installing the ipk.
I have to install the old version and then replace the old binary with the new one from the ipk.
you have to install Icam settings too
you have to install Icam settings too
I always used the ipk from MOHAMED_OS and it was always working after install. Just the new version doesnt start when select on openATV under Softcam and also when restarting the receiver no oscam starting.
Could you explain what to install ?
Dont need to test that. Every other ipk from MOHAMED-OS is working. Even starting it via Putty is working but openATV doesnt start it and after restart i need to start it manually via Putty.
Using Oscam- r11715-798 on Enigma2 boxes. Oscam identifies some channels on the same MUX as PowerVU and BISS, and as a result no video or audio on those channels, but on the same MUX, channels identified only as PowerVU, video and audio are working. Any suggestion as how this can be corrected?
Hello and thank you dear managers and friends, please help me. My problem is with the Swiss package on the Hotbird satellite. I have been getting an account from a proper source for several years now. Until 1 month ago, all packages, including the Swiss package, were excellent. But for some time now, the Swiss package has a long stop every 2 to 5 minutes and sometimes every 10 minutes for 10 to 15 seconds. I have Dreambox 7020 HD which image OPEN pli 11.3 is installed on it, and now I have also installed the most up-to-date Oscam emu 11715 V8 it still has a problem, even the versions of 11714 And 11713 and I installed the rest, but I still have this problem with the Swiss package. I even talked to the person in charge of the server from which I received the cccam account, and he said that there is no problem on the part of the server. Please help me, what should I do, should I make changes in the settings of the Oscam emu files or not ? I am waiting for your answer and guidance. Thanks
I even talked to the person in charge of the server from which I received the cccam account, and he said that there is no problem on the part of the server
indeed, with a server, all works well on this oscam
you need to insert the server details in etc/tubox/ conifig
you will get it to work please
Make a notepad and type in your line for example
C: xxxxx 9033 user pass
change it from text file to.cfg (instead of .txt, it has to be .cfg)
install CCcam and paste your.cfg in "/var/etc/CCcam.cfg"
Hello and thanks
My dear friend downloaded the OSCam 11.715-emu-r798 ALL Images mips - arm file from the site and entered it in the tmp section of the Dreambox, then installed the file through Dreambox and installed the Dreambox restart GUI. Then he entered the Dreambox through the file zilla program, received the installation files in the etc/tuxbox/config section, opened them inside the computer with the notepad++ program, made changes including entering the cccam account lines, and then entered them again with the file zilla program into the Dreambox. and changed the Dreambox to restart.
Now, according to the above, if you need any guidance or other things, please let me know and I will do it.
Hi I live in spain and was pleased to see ITV is now transmitting on a European beam. Tuned in and managed to pick up the channels sound but no picture, I can now see its Tandberg encrypted. Is just a matter of time until the new Tandberg keys appear , then oscam and it will open ?
Thanks in advance for any advice
hi I need too k*ys for ITV tandberg 28.2E please help
Hi I live in spain and was pleased to see ITV is now transmitting on a European beam. Tuned in and managed to pick up the channels sound but no picture, I can now see its Tandberg encrypted. Is just a matter of time until the new Tandberg keys appear , then oscam and it will open ?
Thanks in advance for any advice
hi I need too k*ys for ITV tandberg 28.2E please help
I am also interested.
Thnx
Hi MOHAMED_OS , maybe you can provid an Oscam Icam with lastest NEON support for arm boxes. This would be fantastic.
Don’t have an account yet? Register yourself now and be a part of our community!